Skip site navigation (1)Skip section navigation (2)
From:      "Will Downs" <willd@telusplanet.net>
To:        <freebsd-questions@FreeBSD.ORG>
Subject:   Wrong reply address on previous message - Error compiling kernel - ioconf.o : Undefined symbol
Message-ID:  <000101be5c8c$0644c6a0$da4a800a@win98.techzone.cx>

Next in thread | Raw E-Mail | Index | Archive | Help
Sorry to flood the list, but my previous message had the wrong reply
address. Please reply to this message.

Thanks in advance for help me.


This is my first time configuring a kernel. I get this error when I'm
running "make" .
Has anybody ran into this error before?

________
loading kernel
ioconf.o: Undefined symbol `_ieintr' referenced from data segment
*** Error code 1

Stop.


Thanks again.

Here is my kernel configuration file

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration ->
# Configuring the FreeBSD Kernel -> The Configuration File.
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server
# <URL:http://www.FreeBSD.ORG/>;
#
# An exhaustive list of options and more detailed explanations of the
# device lines is present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#       $Id: GENERIC,v 1.77.2.25 1998/07/20 20:11:04 msmith Exp $

machine         "i386"
#cpu            "I386_CPU"
cpu             "I486_CPU"
#cpu            "I586_CPU"
#cpu            "I686_CPU"
ident           ORBIT
maxusers        15

options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         FFS                     #Berkeley Fast Filesystem
#options                NFS                     #Network Filesystem
#options                MSDOSFS                 #MSDOS Filesystem
#options                "CD9660"                #ISO 9660 Filesystem
options         PROCFS                  #Process filesystem
options         "COMPAT_43"             #Compatible with BSD 4.3 [KEEP
THIS!]
#options                SCSI_DELAY=15           #Be pessimistic about Joe
SCSI device
options         BOUNCE_BUFFERS          #include support for DMA bounce
buffers
options         UCONSOLE                #Allow users to grab the console
options         FAILSAFE                #Be conservative
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         QUOTA
config          kernel  root on wd0

controller      isa0
controller      eisa0
#controller     pci0

#controller     fdc0    at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
#disk           fd0     at fdc0 drive 0
#disk           fd1     at fdc0 drive 1
# Unless you know very well what you're doing, leave ft0 at drive 2, or
# remove the line entirely if you don't need it.  Trying to configure
# it on another unit might cause surprises, see PR kern/7176.
#tape           ft0     at fdc0 drive 2


options         "CMD640"        # work around CMD640 chip deficiency
controller      wdc0    at isa? port "IO_WD1" bio irq 14 vector wdintr
disk            wd0     at wdc0 drive 0
#disk           wd1     at wdc0 drive 1

#controller     wdc1    at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk           wd2     at wdc1 drive 0
#disk           wd3     at wdc1 drive 1

#options                ATAPI           #Enable ATAPI support for IDE bus
#options                ATAPI_STATIC    #Don't do it as an LKM
#device         wcd0            #IDE CD-ROM
#device         wfd0            #IDE floppy (LS-120)

# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.

#controller     ncr0
#controller     amd0
#controller     ahb0
#controller     ahc0
#controller     dpt0
#controller     bt0     at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
#controller     uha0    at isa? port "IO_UHA0" bio irq ? drq 5 vector
uhaintr
#controller     aha0    at isa? port "IO_AHA0" bio irq ? drq 5 vector
ahaintr
#controller     aic0    at isa? port 0x340 bio irq 11 vector aicintr
#controller     nca0    at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller     nca1    at isa? port 0x350 bio irq 5 vector ncaintr
#controller     sea0    at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector
seaintr

options                 DPT_MEASURE_PERFORMANCE # Required by DPT driver??
#options                DPT_VERIFY_HINTR        # Some hardware must have
it!
#options                DPT_TRACK_CCB_STATES    # Some hardware must have
it!
#options                DPT_HANDLE_TIMEOUTS     # Some hardware must have
it!
#options                DPT_TIMEOUT_FACTOR=4    # Some hardware needs more

#controller     scbus0

#device         sd0

#device         od0     #See LINT for possible `od' options.

#device         st0

#device         cd0     #Only need one of these, the code dynamically grows

#device         wt0     at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device         mcd0    at isa? port 0x300 bio irq 10 vector mcdintr

#controller     matcd0  at isa? port 0x230 bio

#device         scd0    at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
device          vt0     at isa? port "IO_KBD" tty irq 1 vector pcrint
#options                XSERVER                 # support for X server
#options                FAT_CURSOR              # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT
lines
#options                PCVT_SCANSET=2          # IBM keyboards are non-std

# Mandatory, don't remove
device          npx0    at isa? port "IO_NPX" flags 0x1 irq 13 vector
npxintr

#
# Laptop support (see LINT for more options)
#
#device         apm0    at isa? disable # Advanced Power Management
#options                APM_BROKEN_STATCLOCK    # Workaround some buggy APM
BIOS
# PCCARD (PCMCIA) support
#controller     card0
#device         pcic0   at card?
#device         pcic1   at card?

#device         sio0    at isa? port "IO_COM1" tty irq 4 vector siointr
#device         sio1    at isa? port "IO_COM2" tty irq 3 vector
siointr#device         sio2    at isa? disable port "IO_COM3" tty irq 5
vector siointr
#device         sio3    at isa? disable port "IO_COM4" tty irq 9 vector
siointr

#device         lpt0    at isa? port? tty irq 7 vector lptintr
#device         lpt1    at isa? port? tty
#device         mse0    at isa? port 0x23c tty irq 5 vector mseintr

#device         psm0    at isa? port "IO_KBD" conflicts tty irq 12 vector
psmintr

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device fxp0
#device tx0
#device vx0

device ed0 at isa? port 0x320 net irq 10 iomem 0xd8000 vector edintr
device ed0 at isa? port 0x340 net irq 11 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ex0 at isa? port? net irq? vector exintr
#device fe0 at isa? port 0x300 net irq ? vector feintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
#device cs0 at isa? disable port 0x300 net irq ? vector csintr

pseudo-device   loop
pseudo-device   ether
pseudo-device   log
#pseudo-device  sl      1
#pseudo-device  ppp     1
#pseudo-device  vn      1
#pseudo-device  tun     1
pseudo-device   pty     16
pseudo-device   gzip            # Exec gzipped a.out's
pseudo-device   snp     1
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options         KTRACE          #kernel tracing

# This provides support for System V shared memory.
#
#options         SYSVSHM
options          SYSVSEM
options          SYSVMSG
# fire wall options
options         IPFIREWALL
options         IPFIREWALL_VERBOSE



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?000101be5c8c$0644c6a0$da4a800a>