Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 10 Jan 1999 21:50:45 -0700
From:      George Vagner <kf7nn1@cybertrails.com>
To:        larry_nilsen <larry_nilsen@eee.org>
Cc:        "freebsd-questions@FreeBSD.ORG" <freebsd-questions@FreeBSD.ORG>
Subject:   Re: ppp "Not"
Message-ID:  <36998325.7DC88FBF@cybertrails.com>
References:  <368AAFC2.7ABE6254@eee.org>

next in thread | previous in thread | raw e-mail | index | archive | help
for one thing i see is your modem is on com 1, so do you have a mouse
on com1 too or are you using a ps/2 type? if your using a ps/2
type then you must have an external modem plugged in to
the com1 port.

another thing i see is your trying to use 38400 bps and sometimes
that is not a good choice for speed, try 57600 or 19200 if u have
an external modem, if you have an internal modem on com1 like it shows
make sure that com1 is disabled in the bios or else you 
have 2 devices mapped at the same address and irq.

I would suggest using an external modem if your not, that way you avoid
irq and i/o port conflicts.



larry_nilsen wrote:
> 
> Hi My FreeBSD Box still not Connected here is what i have
> ppp Version 1.7-$Date:1998/07/06 02:07:29 $
> pppON>show hdlc
> HDLC level errors
> FCS:0 ADDR: 0 COMMAND:0 PROTO:0
> pppON>show log
> log:Carrier CCP Chat Command Connect IPCP LCP Phase
> Tun Warning Error ALERT
> Local:Warning Error Alert
> pppON> show route
> Destination            Gateway            Flags          Netif
> 127.0.0.1                127.0.0.1           UH             lo0
> pppON>show stopped
> stopped Timer: LCP:Disabled, IPCP: Disabled, CCP: Disabled
> pppON> show modem
> device:/dev/cuaa0 speed:38400
> cs8, noparity, CTS/RTS on
> connect Count :2
> out q:387
> Dial Script= Abort Busy Abort     etc..... etc....
> login Script=
> Phone Numbers(s)= xxx-xxxx
> Connect Time :1554 secs
> 0 octets in 0 octets out
> Overall 0 bytes /sec
> 
> When I Start ppp This is What I See
> pppON Circle> term
> Working in interactive mode
> Entering terminal mode
> Type ~? for help
> []                     <----- I get no response from ~? or AT nothing happens
> so ive tried +++(enter) ATE1(enter) simultaneously and still no OK!
> response I just cant get my Modem to echo back to me.Could it be that
> I have a mis-configured modem and if so how do i configure it.And
> also ive been told i might have some setup problems with my modem
> if it looks like it from the info- ive put here .How can i remedy this?
> 
> I hope this information helps to Remedy my ppp Thankyou....
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36998325.7DC88FBF>