Date: Tue, 2 Feb 2016 03:12:38 +1100 From: Kubilay Kocak <koobs@FreeBSD.org> To: "William A. Mahaffey III" <wam@hiwaay.net> Cc: "FreeBSD toolchain mailing list !!!!" <freebsd-toolchain@freebsd.org> Subject: Re: GCC5: pkg vs. ports Message-ID: <CAKA3KycMNVAB4mzWCoOzt31TYPRjqnnEgZhmMwrcXPSGnsWwig@mail.gmail.com> In-Reply-To: <56AF81BF.8050707@hiwaay.net> References: <56AF81BF.8050707@hiwaay.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi William, You may be seeing a previously saved config, try make rmconfig then check again, or look at OPTIONS_DEFAULT inside Makefile You're correct, if graphite *is* a default option, the package should have it . Only other thing I can think of is a silent graphite build failure that isn't fatal, resulting in a built but incomplete package. Unlikely all else being equal though Let us know what you find ./koobs On 2 Feb 2016 3:06 AM, "William A. Mahaffey III" <wam@hiwaay.net> wrote: > > > I just did a full 'pkg upgrade' on my FBSD 9.3R box, which installed the > newest GCC5. I also updated ports. When I used the pkg-provided GCC5, it > doesn't have graphite support enabled, so no auto-parallelization. When I > checked the port w/ make showconfig. it shows graphite enabled. I am > recompiling it as I write this, but I thought the pkg was/is configured > from the port & would have graphite enabled by default, w/ no recompile > needed on my part, no ? I have the various other pkg's req'd for graphite > support pkg-installed (& just updated this A.M.), so I thought I was ready > to go. Not a huge issue, but recompiling the compiler shoots about an hour > on my box, would be sweet to avoid that. TIA for any clues & have a good > one. > > > -- > > William A. Mahaffey III > > ---------------------------------------------------------------------- > > "The M1 Garand is without doubt the finest implement of war > ever devised by man." > -- Gen. George S. Patton Jr. > > _______________________________________________ > freebsd-toolchain@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-toolchain > To unsubscribe, send any mail to " > freebsd-toolchain-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKA3KycMNVAB4mzWCoOzt31TYPRjqnnEgZhmMwrcXPSGnsWwig>