Date: Fri, 12 Sep 2003 16:55:36 +0300 From: admin@abaceeli.net.md To: questions@freebsd.org Subject: Sound Device Toruble Message-ID: <0309121655383100@mail.abaceeli.net.md>
next in thread | raw e-mail | index | archive | help
I have a problem with my Toshiba Satellite 2105 CDS laptop
I compiled the kernel with "device pcm" option, and I can see the card in dmesg, but when I'm trying to play smth to /dev/dsp0 the system is not respondig till hard-reboot.
There is an ESS Maestro-2E Soundcard, and it works fine under Windows OS.
Thanks.
cat /dev/sndstat result:
deathless# cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <ESS Technology Maestro-2E> at I/O port 0xff00 irq 11 (4p/0r/0v channels duplex default)
uname -a:
FreeBSD deathless 5.1-RELEASE FreeBSD 5.1-RELEASE #0: Fri Sep 12 04:53:50 EEST 2003 macros@11.dnt.md:/usr/obj/usr/src/sys/MKERN i386
dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Fri Sep 12 04:53:50 EEST 2003
macros@11.dnt.md:/usr/obj/usr/src/sys/MKERN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc058c000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc058c2bc.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 400911128 Hz
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 66912256 (63 MB)
avail memory = 58994688 (56 MB)
K6-family MTRR support enabled (2 registers)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x18a8-0x18ab on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00fec60
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <simple comms> at device 7.0 (no driver attached)
pci0: <display, VGA> at device 8.0 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0xf7fff000-0xf7ffffff irq 11 at device 11.0 on pci0
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcm0: <ESS Technology Maestro-2E> port 0xff00-0xffff irq 11 at device 12.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
atapci0: <GENERIC ATA controller> port 0x1800-0x180f at device 16.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
cbb0: <ToPIC97 PCI-CardBus Bridge> at device 19.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 19 INTA is routed to irq 11
cbb1: <ToPIC97 PCI-CardBus Bridge> at device 19.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 19 INTB is routed to irq 11
atkb0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
Timecounters tick every 1.000 msec
DUMMYNET initialized (011031)
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 10 packets/entry by default
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x88002000-0x880021ff irq 11 at device 0.0 on cardbus1
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:02:44:3c:dd:0d
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ad0: 4126MB <TOSHIBA MK4313MAT> [8944/15/63] at ata0-master BIOSDMA
acd0: CDROM <TOSHIBA CD-ROM XM-1902B> at ata1-master BIOSPIO
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0309121655383100>