Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 15 Mar 2017 13:07:56 -0500 (CDT)
From:      "Valeri Galtsev" <galtsev@kicp.uchicago.edu>
To:        "Brad Salai" <bsalai@gmail.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: texlive and Arduino do not show up in gnome-menu
Message-ID:  <33488.128.135.52.6.1489601276.squirrel@cosmo.uchicago.edu>
In-Reply-To: <9A36C317-5CFC-467C-9C20-93850159EEEB@gmail.com>
References:  <mailman.81.1489233602.47884.freebsd-questions@freebsd.org>    <9A36C317-5CFC-467C-9C20-93850159EEEB@gmail.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Sat, March 11, 2017 10:50 am, Brad Salai wrote:
> Turns out that the problem with texlive was me. It installed all the
working parts but not any X11 parts. I installed TeXworks and all is
well.
> All that is left is to figure out where the ports system put Arduino.
Thanks to everyone for the help.

I have FreeBSD 10.3 on my laptop. I do have all arduino packages installed
using pkg. In menus of MATE desktop environment (MATE is fork of GNOME) I
do have arduino:

Applications --> Programming --> Arduino

I hope, this helps.

Valeri

>
> Brad Salai
> (585) 708-9235
> Bsalai@gmail.com
>
>
>> On Mar 11, 2017, at 7:00 AM, freebsd-questions-request@freebsd.org wrote:
>> Send freebsd-questions mailing list submissions to
>>    freebsd-questions@freebsd.org
>> To subscribe or unsubscribe via the World Wide Web, visit
>>    https://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> or, via email, send a message with subject or body 'help' to
>>    freebsd-questions-request@freebsd.org
>> You can reach the person managing the list at
>>    freebsd-questions-owner@freebsd.org
>> When replying, please edit your Subject line so it is more specific
than "Re: Contents of freebsd-questions digest..."
>> Today's Topics:
>>   1. [iTunes-Connect]Someone has been logged into your account
>>      from another country (AppleID)
>>   2. daily security run output (setuid) (James B. Byrne)
>>   3. Re: daily security run output (setuid) (Matthew Seaman)
>>   4. Re: daily security run output (setuid) (Lowell Gilbert)
>>   5. Reboot hangs on a FreeBSD system I'm building (Bob Willcox) 6.
Noob question (Brad Salai)
>>   7. Re: Noob question (Jack L.)
>>   8. Re: Libreoffice and Arduino do not show up in gnome-menu
>>      (Sergei Akhmatdinov)
>>   9. Re: Noob question (Ken Moffat)
>> ----------------------------------------------------------------------
Message: 1
>> Date: Fri, 10 Mar 2017 08:05:33 -0600 (CST)
>> From: AppleID <root@localhost.linx.com>
>> To: freebsd-questions@freebsd.org
>> Subject: [iTunes-Connect]Someone has been logged into your account
>>    from another country
>> Message-ID: <20170310140533.3A0A0A619BA@578509-app3.linx.com>
>> Content-Type: text/plain; charset="iso-8859-1"
>> ------------------------------
>> Message: 2
>> Date: Fri, 10 Mar 2017 11:42:42 -0500
>> From: "James B. Byrne" <byrnejb@harte-lyne.ca>
>> To: freebsd-questions@freebsd.org
>> Subject: daily security run output (setuid)
>> Message-ID:
>>    <0a9bbc9664cdeacc27dacadbd575ea1d.squirrel@webmail.harte-lyne.ca>
>> Content-Type: text/plain;charset=iso-8859-1
>> Following a recent update we began to see this report:
>> Checking setuid files and devices:
>> setuid diffs:
>> --- /var/log/setuid.today        2017-01-18 03:01:01.000000000 -0500
+++ /tmp/security.saU3IUZT        2017-03-08 03:01:01.006331628 -0500
@@ -36,9 +36,9 @@
>> . . .
>> - 70217 -rwsr-xr-x  1 root  wheel         22416 Jan 12 00:09:17 2017
/usr/local/bin/pkexec
>> . . .
>> + 30527 -rwsr-xr-x  1 root  wheel         22416 Feb 25 00:04:40 2017
/usr/local/bin/pkexec
>> pkg which /usr/local/bin/pkexec
>> /usr/local/bin/pkexec was installed by package polkit-0.113_3
>> pkg info polkit-0.113_3
>> polkit-0.113_3
>> Name           : polkit
>> Version        : 0.113_3
>> Installed on   : Tue Mar  7 15:31:14 2017 EST
>> This was a legitimate update as far as I can see. I can see that the
mtime value has changed but why does the update not account for this
with the security system?
>> --
>> ***          e-Mail is NOT a SECURE channel          ***
>>        Do NOT transmit sensitive data via e-Mail
>> Do NOT open attachments nor follow links sent by e-Mail
>> James B. Byrne                mailto:ByrneJB@Harte-Lyne.ca
>> Harte & Lyne Limited          http://www.harte-lyne.ca
>> 9 Brockley Drive              vox: +1 905 561 1241
>> Hamilton, Ontario             fax: +1 905 561 0757
>> Canada  L8E 3C3
>> --
>> ***          e-Mail is NOT a SECURE channel          ***
>>        Do NOT transmit sensitive data via e-Mail
>> Do NOT open attachments nor follow links sent by e-Mail
>> James B. Byrne                mailto:ByrneJB@Harte-Lyne.ca
>> Harte & Lyne Limited          http://www.harte-lyne.ca
>> 9 Brockley Drive              vox: +1 905 561 1241
>> Hamilton, Ontario             fax: +1 905 561 0757
>> Canada  L8E 3C3
>> ------------------------------
>> Message: 3
>> Date: Fri, 10 Mar 2017 17:04:34 +0000
>> From: Matthew Seaman <matthew@FreeBSD.org>
>> To: freebsd-questions@freebsd.org
>> Subject: Re: daily security run output (setuid)
>> Message-ID: <c9d3a981-0c3e-142c-817b-ab8c6cc5cec8@FreeBSD.org>
>> Content-Type: text/plain; charset="windows-1252"
>>> On 2017/03/10 16:42, James B. Byrne via freebsd-questions wrote:
Following a recent update we began to see this report:
>>> Checking setuid files and devices:
>>> setuid diffs:
>>> --- /var/log/setuid.today        2017-01-18 03:01:01.000000000 -0500
+++ /tmp/security.saU3IUZT        2017-03-08 03:01:01.006331628 -0500
@@ -36,9 +36,9 @@
>>> . . .
>>> - 70217 -rwsr-xr-x  1 root  wheel         22416 Jan 12 00:09:17 2017
/usr/local/bin/pkexec
>>> . . .
>>> + 30527 -rwsr-xr-x  1 root  wheel         22416 Feb 25 00:04:40 2017
/usr/local/bin/pkexec
>>> pkg which /usr/local/bin/pkexec
>>> /usr/local/bin/pkexec was installed by package polkit-0.113_3
>>> pkg info polkit-0.113_3
>>> polkit-0.113_3
>>> Name           : polkit
>>> Version        : 0.113_3
>>> Installed on   : Tue Mar  7 15:31:14 2017 EST
>>> This was a legitimate update as far as I can see. I can see that the
mtime value has changed but why does the update not account for this
with the security system?
>> The security system?  That makes it sound *way* more sophisticated than
it really is.
>> All that the setuid daily script does is run find(1) to locate all of
the setuid files on the system, creates a sorted list, and then diffs
that against the previous day's list.  It tells you when there have
been
>> any changes to setuid files.  It doesn't say anything about whether
those changes are legitimate or not -- that's down to the (supposedly)
intelligent administrators who read the email reports.
>> The beauty of it is that it is so simple it is very hard to bamboozle.
In this case, since it is a file from a pkg that you can verify was
re-installed during the right timeframe then you can be pretty sure
that
>> nothing untoward is going on.  Also running 'pkg check -s polkit' to
verify that none of the checksums on the package's files have changed
might provide additional peace of mind.
>>    Cheers,
>>    Matthew
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: signature.asc
>> Type: application/pgp-signature
>> Size: 972 bytes
>> Desc: OpenPGP digital signature
>> URL:
>> <http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20170310/0d5e6e9a/attachment-0001.sig>;
------------------------------
>> Message: 4
>> Date: Fri, 10 Mar 2017 12:11:57 -0500
>> From: Lowell Gilbert <Lowell@Be-Well.Ilk.Org>
>> To: "James B. Byrne via freebsd-questions"
>>    <freebsd-questions@freebsd.org>
>> Cc: byrnejb@harte-lyne.ca
>> Subject: Re: daily security run output (setuid)
>> Message-ID: <44bmt9jbtu.fsf@lowell-desk.lan>
>> Content-Type: text/plain
>> "James B. Byrne via freebsd-questions" <freebsd-questions@freebsd.org>
writes:
>>> Following a recent update we began to see this report:
>>> Checking setuid files and devices:
>> [...]
>>> This was a legitimate update as far as I can see. I can see that the
mtime value has changed but why does the update not account for this
with the security system?
>> Because having "the security system" trust that the the port update was
initiated by an appropriately authorized user would make it too easy to
hide a security breach.
>> ------------------------------
>> Message: 5
>> Date: Fri, 10 Mar 2017 13:03:09 -0600
>> From: Bob Willcox <bob@immure.com>
>> To: questions list <freebsd-questions@freebsd.org>
>> Subject: Reboot hangs on a FreeBSD system I'm building
>> Message-ID: <20170310190308.GA29798@rancor.immure.com>
>> Content-Type: text/plain; charset=us-ascii
>> I'm building a system to act as a fileserver for my network and things are
>> going reasonably well so far except that when I reboot it via the
reboot
>> command it gets to the point after it has successfully sync'd the
filesystem
>> caches and the just hangs there. Note that it will respond to pings
from
>> other systems on the network but keyboard activity is ignored.
>> Here's the uname output:
>> FreeBSD yoda.immure.com 11.0-STABLE FreeBSD 11.0-STABLE #1 r315001: Fri
Mar 10 08:38:20 CST 2017
>> bob@yoda.immure.com:/usr/obj/usr/src/sys/YODA  amd64
>> This is running on an Asus H170I-Pro motherboard and has a Samsung 960
EVO M.2
>> PCIe NVMe boot drive. The UEFI BIOS settings are all at their defaults. I
>> planning to check the BIOS settings to see if changing any of them will
make a
>> difference.
>> Note that the root/boot drive is ZFS in case that matters.
>> --
>> Bob Willcox    | If a program is useful, it will be changed.
>> bob@immure.com |
>> Austin, TX     |
>> ------------------------------
>> Message: 6
>> Date: Fri, 10 Mar 2017 19:51:35 -0500
>> From: Brad Salai <bsalai@gmail.com>
>> To: freebsd-questions@freebsd.org
>> Subject: Noob question
>> Message-ID: <83FA4D74-AB47-45D8-A5D6-EB8892A47E4D@gmail.com>
>> Content-Type: text/plain;    charset=us-ascii
>> I've just finished a clean install of FreeBSD 11 on an HP desktop that
I
>> got for free (I know that's not relevant but I'm telling everyone.) I
got Gnome running and installed Libre Office without issues. Then I
tried TeXlive as a package and Arduino as a port. Both completed
successfully, but neither showed up in Gnome and I can't figure out the
path to add to start them manually. Can anyone help?
>> Brad
>> Brad Salai
>> (585) 708-9235
>> Bsalai@gmail.com
>> ------------------------------
>> Message: 7
>> Date: Fri, 10 Mar 2017 17:11:45 -0800
>> From: "Jack L." <xxjack12xx@gmail.com>
>> To: Brad Salai <bsalai@gmail.com>
>> Cc: "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>
Subject: Re: Noob question
>> Message-ID:
>>    <CALeGphzm7woDFoCPTwNt+POrh_oDKMm9OPyovKGbppo3CFtz2w@mail.gmail.com>
>> Content-Type: text/plain; charset=UTF-8
>> You can run
>> pkg info --list-files packagename
>> and that will give you a list of where all the installed files are
>>> On Fri, Mar 10, 2017 at 4:51 PM, Brad Salai <bsalai@gmail.com> wrote:
I've just finished a clean install of FreeBSD 11 on an HP desktop that
I got for free (I know that's not relevant but I'm telling everyone.)
I got Gnome running and installed Libre Office without issues. Then I
tried TeXlive as a package and Arduino as a port. Both completed
successfully, but neither showed up in Gnome and I can't figure out
the
>>> path to add to start them manually. Can anyone help?
>>> Brad
>>> Brad Salai
>>> (585) 708-9235
>>> Bsalai@gmail.com
>>> _______________________________________________
>>> freebsd-questions@freebsd.org mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>> To unsubscribe, send any mail to
>>> "freebsd-questions-unsubscribe@freebsd.org"
>> ------------------------------
>> Message: 8
>> Date: Fri, 10 Mar 2017 20:39:33 -0500
>> From: Sergei Akhmatdinov <sakhmatd@inventati.org>
>> To: Brad Salai <bsalai@gmail.com>
>> Cc: freebsd-questions@freebsd.org
>> Subject: Re: Libreoffice and Arduino do not show up in gnome-menu
Message-ID: <20170311013933.4qn72svt4nodgiut@silverbeast>
>> Content-Type: text/plain; charset="us-ascii"
>>> On Fri, Mar 10, 2017 at 07:51:35PM -0500, Brad Salai wrote:
>>> I've just finished a clean install of FreeBSD 11 on an HP desktop that
I got for free (I know that's not relevant but I'm telling everyone.)
I got Gnome running and installed Libre Office without issues. Then I
tried TeXlive as a package and Arduino as a port. Both completed
successfully, but neither showed up in Gnome and I can't figure out
the
>>> path to add to start them manually. Can anyone help?
>>> Brad
>> $ which binary-name
>> That should get you the path to the installed binary.
>> For Libreoffice, that would be
>> $ which libreoffice
>> I don't use Gnome, but it probably reads your
>> /usr/local/share/applications directory.
>> Try adding .desktop files to it manually. Although it's suspicious that
they aren't there already or that Gnome wouldn't pick them up if they
are.
>> Also, just a piece of friendly advice:
>> Try to give more discriptive subject lines when posting to
>> the mailing list next time. It helps other people to help you. :) Cheers,
>> --
>> Sergei Akhmatdinov
>> My GPG public key:
>> gpg --keyserver pgp.mit.edu --recv-keys AD800D99
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: signature.asc
>> Type: application/pgp-signature
>> Size: 833 bytes
>> Desc: not available
>> URL:
>> <http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20170310/519c1341/attachment-0001.sig>;
------------------------------
>> Message: 9
>> Date: Sat, 11 Mar 2017 01:41:01 +0000
>> From: Ken Moffat <zarniwhoop@ntlworld.com>
>> To: freebsd-questions@freebsd.org
>> Subject: Re: Noob question
>> Message-ID: <20170311014101.GA18045@milliways.localdomain>
>> Content-Type: text/plain; charset=utf-8
>>> On Fri, Mar 10, 2017 at 07:51:35PM -0500, Brad Salai wrote:
>>> I've just finished a clean install of FreeBSD 11 on an HP desktop that
I got for free (I know that's not relevant but I'm telling everyone.)
I got Gnome running and installed Libre Office without issues. Then I
tried TeXlive as a package and Arduino as a port. Both completed
successfully, but neither showed up in Gnome and I can't figure out
the
>>> path to add to start them manually. Can anyone help?
>>> Brad
>> No idea about arduino, but texlive - at least in a full install -
contains a lot of different things. At a minimum, you probably want to
run one of the engines, e.g. using pdflatex on a .tex file to create a
text PDF.  For more complex PDFs (adding things for images, or using
other programs for indexing or bibliographies) you will probably want
to create a Makefile.
>> For a basic PDF that, you open your term of choice (gnome-terminal, I
suppose), run 'which' to see if pdflatex (or one of the other engines,
e.g. lualatex, xelatex, or even context) is on your PATH. If it isn't,
you use find or locate to see where it is, and then add that directory
to your PATH.  But I guess that installing the package will have fixed
that up.
>> Finally, you create your tex file in your preferred editor, and then
from your term you invoke the engine on the tex file, fix any errors
and repeat until you get a PDF, open that in your viewer (evince, for
gnome) and review, then fix any spelling or formatting errors and
repeat.
>> So, providing it is all on your PATH, you just go in and do it.  If you
want a gui front-end, perhaps get TeXworks which appears to be a
package.  In windows versions of texlive, TeXworks is included - but
not in 'nix versions : it has additional dependencies such as Qt. Happy
TeXing.
>> ?en
>> --
>> `I shall take my mountains', said Lu-Tze. `The climate will be good for
them.'     -- Small Gods
>> ------------------------------
>> Subject: Digest Footer
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to
>> "freebsd-questions-unsubscribe@freebsd.org"
>> ------------------------------
>> End of freebsd-questions Digest, Vol 666, Issue 6
>> *************************************************
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe@freebsd.org"
>


++++++++++++++++++++++++++++++++++++++++
Valeri Galtsev
Sr System Administrator
Department of Astronomy and Astrophysics
Kavli Institute for Cosmological Physics
University of Chicago
Phone: 773-702-4247
++++++++++++++++++++++++++++++++++++++++







Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?33488.128.135.52.6.1489601276.squirrel>