Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 26 Dec 1994 01:19:11 +0059 (MET)
From:      Andreas Schulz <ats@g386bsd.first.gmd.de>
To:        jkorkala@xgw.fi (Jussi P. Korkala)
Cc:        freebsd-questions@freebsd.org
Subject:   Re: FreeBSD 2.0 install doesn't detect hard discs (Adaptec 1542CF)
Message-ID:  <199412260019.BAA08620@g386bsd.first.gmd.de>
In-Reply-To: <199412250417.GAA21968@xgw5.xgw.fi> from "Jussi P. Korkala" at Dec 25, 94 06:17:45 am

next in thread | previous in thread | raw e-mail | index | archive | help

> I have two SCSI-2 discs on my AHA-1542CF controller, they are as follows:  
> ID #0 - ST 1480 (406 MB SCSI-2)                                            
> ID #1 - DPES 31080 (1033 MB SCSI-2 FAST)                                   
>                                                                               
> The problem is that freebsd installation does not even detect the drives. The 
> install menu doesn't have anything on it, none of the functions work.         

What does it show on the startup ? Can you copy the first lines from
your startup to paper and mail that to us ?
It should show for a 1542CF with some disks something like:

Dec 21 17:40:54 ats7 kernel: fdc0: [0: fd0: 1.44MB 3.5in] [1: fd1: 1.2MB 5.25in]
Dec 21 17:40:55 ats7 kernel: aha0: 1542C/CF detected, unlocking mailbox
Dec 21 17:40:55 ats7 kernel: aha0: reading board settings, dma=5 int=11  (bus speed defaulted)
Dec 21 17:40:55 ats7 kernel: aha0 at 0x330-0x333 irq 11 drq 5 on isa
Dec 21 17:40:55 ats7 kernel: aha0 targ 0 lun 0: type 0(direct) fixed SCSI2
Dec 21 17:40:55 ats7 kernel: aha0 targ 0 lun 0: <TOSHIBA MK537FB         6261>
Dec 21 17:40:55 ats7 kernel: sd0: 1014MB (2076758 total sec), 1980 cyl, 13 head, 80 sec, bytes/sec 512
Dec 21 17:40:55 ats7 kernel: aha0 targ 1 lun 0: type 0(direct) removable SCSI1
Dec 21 17:40:55 ats7 kernel: aha0 targ 1 lun 0: <SyQuest SQ555           F7P >
Dec 21 17:40:55 ats7 kernel: sd1(aha0:1:0): not ready
Dec 21 17:40:55 ats7 kernel: sd1 could not mode sense (4). Using ficticious geometry
Dec 21 17:40:55 ats7 kernel: sd1: 42MB (86700 total sec), 42 cyl, 64 head, 32 sec, bytes/sec 512

If these aha0: and the 1542C/CF detected messages are not visible during
startup, something is wrong with the hardware.


	  ATS ( ats@first.gmd.de or ats@cs.tu-berlin.de )

Andreas Schulz  GMD-FIRST     12489  Berlin-Adlershof  Rudower Chaussee 5
Gebaeude 13.7   Tel: +49-30-6392-1856/+49-177-2134745    Germany/Europe



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199412260019.BAA08620>