Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 9 Jul 2003 14:32:31 +0100
From:      "Tomas Hodan" <tomas@hodan.sk>
To:        "'Wilko Bulte'" <wkb@freebie.xs4all.nl>
Cc:        freebsd-scsi@freebsd.org
Subject:   RE: ql2200
Message-ID:  <000001c3461e$8cd7ec30$3564f892@emea.ads.autodesk.com>
In-Reply-To: <20030708192824.GA64643@freebie.xs4all.nl>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
I tried another ibm intellistation z pro (a current model) and ql2322
(dual 2GBit fibre) and another disk array (ibm) with same results.

tomas

-----Original Message-----
From: Wilko Bulte [mailto:wkb@freebie.xs4all.nl] 
Sent: Tuesday, July 08, 2003 8:28 PM
To: Tomas Hodan
Cc: freebsd-scsi@freebsd.org
Subject: Re: ql2200


On Tue, Jul 08, 2003 at 04:37:27PM +0100, Tomas Hodan wrote:

Matt (who wrote the isp driver) will ask you if you loaded ispfw.ko (the
firmware for the cards the isp driver supports).

Wilko

> 
> I have problem to get running qlogic 2200 in current. I have tried 
> diffenet qlogic boards (but all was ql2200), different qlogic bios, 
> disk arrays, different freebsd version, different pci slots.
> 
> with current version (cvs and build) from
> Jul  7 10:11:48 pica kernel: FreeBSD 5.1-CURRENT #0: Fri Jul  4 
> 14:03:50 GMT 2003
> 
> I'm getting this error :
> 
> Jul  7 10:11:49 pica kernel: isp0: <Qlogic ISP 2200 PCI FC-AL Adapter>

> port 0x9800-0x98ff mem 0xf2003000-0xf2 003fff irq 11 at device 8.0 on 
> pci3 Jul  7 10:11:49 pica kernel: isp0: Polled Mailbox Command (0x2) 
> Timeout Jul  7 10:11:49 pica kernel: device_probe_and_attach: isp0 
> attach returned 6
> 
> sometimes the kernel stays in this state forever, sometime after 
> sometime it finish booting. I had twice succesfull boot with the 
> qlogic board and I was able to use the disks connected to the board. 
> after next reboot it stops to work.
> 
> anyone any ides?
> 
> thanks
> tomas
> 
> _______________________________________________
> freebsd-scsi@freebsd.org mailing list 
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to 
> "freebsd-scsi-unsubscribe@freebsd.org"
---end of quoted text---

-- 
|   / o / /_  _   		wilko@FreeBSD.org
|/|/ / / /(  (_)  Bulte				



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?000001c3461e$8cd7ec30$3564f892>