Date: Fri, 13 Oct 2000 22:50:42 +0200 (CEST) From: Janko van Roosmalen <janko@compuserve.com> To: Nils Holland <nils@nightcastleproductions.org> Cc: J <jeremy.vandenhouten@marquette.edu>, freebsd-questions@FreeBSD.ORG Subject: Re: PPP connection to German T-Online Message-ID: <Pine.BSF.4.10.10010131857010.529-100000@parmenides.utp.net> In-Reply-To: <Pine.BSF.4.21.0010130612480.434-100000@grazia.ncptiddische.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Nils, Insert a "delete ALL" and replace "add HISADDR" with "add! HISADDR". Replace the "ifaddr 192.168" with "ifaddr 10.0." and see if this makes a difference. I marked the changes in the quoted log below. ===Janko van Roosmalen - Vught - Netherlands=== On Fri, 13 Oct 2000, Nils Holland wrote: > > On Thu, 12 Oct 2000, J wrote: > > > Is it possible it's just not using papchap and using a plain unix type login > > where in you have to configure your ppp.conf to look for ogin: and word: > > ??? > > Well, this is not the problem if I interpret the logfile correctly. Below > I have included first of all the ppp.conf file I use and then there's also > a section from my ppp.log file that reflects the connection. And, oh yes, > if it helps, I'm using FreeBSD 4.1.1-STABLE. > > ppp.conf: > > ################################################################# > # PPP Sample Configuration File > # Originally written by Toshiharu OHNO > # Simplified 5/14/1999 by wself@cdrom.com > # > # $FreeBSD: src/etc/ppp/ppp.conf,v 1.1.2.2 1999/08/29 14:19:56 peter Exp $ > ################################################################# > > default: > > # > # Make sure that "device" references the correct serial port > # for your modem. (cuaa0 = COM1, cuaa1 = COM2) > # > > set device /dev/cuaa2 > > set log Phase Chat LCP IPCP CCP tun command > set speed 115200 > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" > set timeout 300 > set ifaddr 192.168.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 Try: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > add default HISADDR Replace above line with: delete ALL add! default HISADDR > enable dns > > papchap: > > # > # edit the next three lines and replace the items in caps with > # the values which have been assigned by your ISP. > # > > set phone 0191011 > set authname "0008012949315200770843140001" > set authkey "SECRET!!!" > > ppp.log: > > Oct 13 06:30:11 tanja ppp[1122]: Phase: deflink: Created in closed state > Oct 13 06:30:12 tanja ppp[1122]: tun0: Command: default: set speed 115200 > Oct 13 06:30:12 tanja ppp[1122]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT > Oct 13 06:30:12 tanja ppp[1122]: tun0: Command: default: set timeout 300 > Oct 13 06:30:12 tanja ppp[1122]: tun0: Command: default: set ifaddr 192.168.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > Oct 13 06:30:12 tanja ppp[1122]: tun0: Command: default: add default HISADDR > Oct 13 06:30:12 tanja ppp[1122]: tun0: Command: default: enable dns > Oct 13 06:30:12 tanja ppp[1122]: tun0: Command: papchap: set phone 0191011 > Oct 13 06:30:12 tanja ppp[1122]: tun0: Command: papchap: set authname 0008012949315200770843140001 > Oct 13 06:30:12 tanja ppp[1122]: tun0: Command: papchap: set authkey ******** > Oct 13 06:30:12 tanja ppp[1122]: tun0: Phase: PPP Started (interactive mode). > Oct 13 06:30:13 tanja ppp[1122]: tun0: Command: /dev/tty: dial > Oct 13 06:30:13 tanja ppp[1122]: tun0: Phase: bundle: Establish > Oct 13 06:30:13 tanja ppp[1122]: tun0: Phase: deflink: closed -> opening > Oct 13 06:30:13 tanja ppp[1122]: tun0: Phase: deflink: Connected! > Oct 13 06:30:13 tanja ppp[1122]: tun0: Phase: deflink: opening -> dial > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: Phone: 0191011 > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: deflink: Dial attempt 1 of 1 > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: Send: AT^M > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: Expect(5): OK > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: Received: AT^M^M > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: Received: OK^M > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: Send: ATE1Q0^M > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: Expect(5): OK > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: Received: ATE1Q0^M^M > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: Received: OK^M > Oct 13 06:30:13 tanja ppp[1122]: tun0: Chat: Send: ATDT0191011^M > Oct 13 06:30:15 tanja ppp[1122]: tun0: Chat: Expect(40): CONNECT > Oct 13 06:30:39 tanja ppp[1122]: tun0: Chat: Received: ATDT0191011^M^M > Oct 13 06:30:39 tanja ppp[1122]: tun0: Chat: Received: CONNECT 45333/ARQ/V90/LAPM/V42BIS^M > Oct 13 06:30:39 tanja ppp[1122]: tun0: Phase: deflink: dial -> carrier > Oct 13 06:30:40 tanja ppp[1122]: tun0: Phase: deflink: /dev/cuaa2: CD detected > Oct 13 06:30:40 tanja ppp[1122]: tun0: Phase: deflink: carrier -> login > Oct 13 06:30:40 tanja ppp[1122]: tun0: Phase: deflink: login -> lcp > Oct 13 06:30:40 tanja ppp[1122]: tun0: LCP: FSM: Using "deflink" as a transport > Oct 13 06:30:40 tanja ppp[1122]: tun0: LCP: deflink: State change Initial --> Closed > Oct 13 06:30:40 tanja ppp[1122]: tun0: LCP: deflink: State change Closed --> Stopped > Oct 13 06:30:41 tanja ppp[1122]: tun0: LCP: deflink: LayerStart > Oct 13 06:30:41 tanja ppp[1122]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped > Oct 13 06:30:41 tanja ppp[1122]: tun0: LCP: ACFCOMP[2] > Oct 13 06:30:41 tanja ppp[1122]: tun0: LCP: PROTOCOMP[2] > Oct 13 06:30:41 tanja ppp[1122]: tun0: LCP: ACCMAP[6] 0x00000000 > Oct 13 06:30:41 tanja ppp[1122]: tun0: LCP: MRU[4] 1500 > Oct 13 06:30:41 tanja ppp[1122]: tun0: LCP: MAGICNUM[6] 0x1cef68bc > Oct 13 06:30:41 tanja ppp[1122]: tun0: LCP: deflink: State change Stopped --> Req-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: deflink: RecvConfigReq(1) state = Req-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: MRU[4] 1524 > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: ACCMAP[6] 0x00000000 > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: PROTOCOMP[2] > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: ACFCOMP[2] > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: MRRU[4] 1524 > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: ENDDISC[11] Local Addr: stacking > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: deflink: SendConfigRej(1) state = Req-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: MRRU[4] 1524 > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: deflink: RecvConfigAck(1) state = Req-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: deflink: State change Req-Sent --> Ack-Rcvd > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: deflink: RecvConfigReq(2) state = Ack-Rcvd > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: MRU[4] 1524 > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: ACCMAP[6] 0x00000000 > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: PROTOCOMP[2] > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: ACFCOMP[2] > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: ENDDISC[11] Local Addr: stacking > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: deflink: SendConfigAck(2) state = Ack-Rcvd > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: MRU[4] 1524 > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: ACCMAP[6] 0x00000000 > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: PROTOCOMP[2] > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: ACFCOMP[2] > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: ENDDISC[11] Local Addr: stacking > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: deflink: State change Ack-Rcvd --> Opened > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: deflink: LayerUp > Oct 13 06:30:42 tanja ppp[1122]: tun0: Phase: bundle: Authenticate > Oct 13 06:30:42 tanja ppp[1122]: tun0: Phase: deflink: his = PAP, mine = none > Oct 13 06:30:42 tanja ppp[1122]: tun0: Phase: Pap Output: 0008012949315200770843140001 ******** > Oct 13 06:30:42 tanja ppp[1122]: tun0: Phase: Pap Input: SUCCESS () > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: Using trigger address 0.0.0.0 > Oct 13 06:30:42 tanja ppp[1122]: tun0: CCP: FSM: Using "deflink" as a transport > Oct 13 06:30:42 tanja ppp[1122]: tun0: CCP: deflink: State change Initial --> Closed > Oct 13 06:30:42 tanja ppp[1122]: tun0: CCP: deflink: LayerStart. > Oct 13 06:30:42 tanja ppp[1122]: tun0: CCP: deflink: SendConfigReq(1) state = Closed > Oct 13 06:30:42 tanja ppp[1122]: tun0: CCP: DEFLATE[4] win 15 > Oct 13 06:30:42 tanja ppp[1122]: tun0: CCP: PRED1[2] > Oct 13 06:30:42 tanja ppp[1122]: tun0: CCP: deflink: State change Closed --> Req-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: Phase: deflink: lcp -> open > Oct 13 06:30:42 tanja ppp[1122]: tun0: Phase: bundle: Network > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: FSM: Using "deflink" as a transport > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: State change Initial --> Closed > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: LayerStart. > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: IPADDR[6] 0.0.0.0 > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: PRIDNS[6] 62.104.214.77 > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: SECDNS[6] 62.104.196.134 > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: State change Closed --> Req-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: RecvConfigReq(1) state = Req-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: IPADDR[6] 193.158.144.93 > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: SendConfigAck(1) state = Req-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: IPADDR[6] 193.158.144.93 > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: deflink: RecvProtocolRej(3) state = Opened > Oct 13 06:30:42 tanja ppp[1122]: tun0: LCP: deflink: -- Protocol 0x80fd (Compression Control Protocol) was rejected! > Oct 13 06:30:42 tanja ppp[1122]: tun0: CCP: deflink: State change Req-Sent --> Stopped > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: RecvConfigRej(1) state = Ack-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: PRIDNS[6] 62.104.214.77 > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: SECDNS[6] 62.104.196.134 > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: SendConfigReq(2) state = Ack-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: IPADDR[6] 0.0.0.0 > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: RecvConfigNak(2) state = Ack-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: IPADDR[6] 62.158.151.61 > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: IPADDR[6] changing address: 0.0.0.0 --> 62.158.151.61 > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: deflink: SendConfigReq(3) state = Ack-Sent > Oct 13 06:30:42 tanja ppp[1122]: tun0: IPCP: IPADDR[6] 62.158.151.61 > Oct 13 06:30:43 tanja ppp[1122]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression > Oct 13 06:30:43 tanja ppp[1122]: tun0: IPCP: deflink: RecvConfigAck(3) state = Ack-Sent > Oct 13 06:30:43 tanja ppp[1122]: tun0: IPCP: deflink: State change Ack-Sent --> Opened > Oct 13 06:30:43 tanja ppp[1122]: tun0: IPCP: deflink: LayerUp. > Oct 13 06:30:43 tanja ppp[1122]: tun0: IPCP: myaddr 62.158.151.61 hisaddr = 193.158.144.93 > > You see, it seems more or less normal (in my opinion) I get an IP-address > from the remote PPP-server. I also get hisaddr which is added as the new > default route (this isspecified in ppp.conf and it really happens when I > monitor the routes). Also, the DNS-servers the ppp-server tells me about > are successfully being placed into /etc/resolv.conf. > > Now, I still cannot ping any host on the Internet, INCLUDING hisaddr. I > can, however, ping the nameservers assigned to be above. A nslookup is not > possible, though. > > Simply replacing the phone number and login information in the ppp.conf > file with the information of a different ISP makes it work > immediately. Additionally, as I said yesterday, trying to establish a > PPP-connection to T-Online using Windoze 95 dial-up-network works as well. > > Now you see, this is all really strange. If anyone has an idea what I > could do, *Please help me*. > > See ya, > Nils > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10010131857010.529-100000>