Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 20 Feb 2007 19:22:24 +0000
From:      Tom Judge <>
To:        Dan D Niles <>
Subject:   Re: Root devices changing on Dell 2950 with dual perc 5
Message-ID:  <>
In-Reply-To: <>
References:  <>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Dan D Niles wrote:
> I just installed FreeBSD 6.2 on a Dell 2950.  I installed it on a raid 1
> on the integrated Perc 5i.  The root device was /dev/mfid0s2a.
> Then, I configured a raid 5 device on the Perc 5e.  Now, my root device
> was /dev/mfid1s2a.   As a test, I configured an additional raid 1 device
> on the Perc 5e.  Now my root device is /dev/mfid2s2a.
> How do I get the internal raid device to be /dev/mfid0 and not change
> every time I add an external raid device?
> The machine BIOS lists the Perc 5i first, and the Perc BIOS lists the
> Perc 5i as controller 0 and the Perc 5e as controller 1.
> Any ideas how to fix this?
> Thanks,
> Dan

Not a true fix but you could take a look at geom label.  It will allow 
you to label each partition with a static device id.


Want to link to this message? Use this URL: <>