Date: Thu, 24 Aug 2000 16:16:40 +0200 From: Michael Elbel <Michael.Elbel@consol.de> To: mobile@freebsd.org Subject: Ricoh RL5C476 PCI-CardBus Bridge doesn't see card changes Message-ID: <20000824161639.C35337@consol.de>
next in thread | raw e-mail | index | archive | help
--HcAYCG3uE/tztfnV
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
I have this nice new Asus L8400 Notebook. Works quite well with
FreeBSD. There's one quirk with its card bus controller though. It will not
recognize card insertions / removals. If the card is there when the machine
boots, everything is fine so I'd guess it shouldn't be interrupt mismatches
or so. However, if I remove the card, pccardc doesn't see it. Insertions
don't get detected either.
This is with 4.0, 4.1 and 4.1-Stable as of today.
Has anybody seen something like that before? Any pointers as to in what
direction I should look?
I've appended the output of a boot -v in case anybody is interested.
Thanks ahead,
Michael
--
/bin/bash: randsig1.pl: command not found
--HcAYCG3uE/tztfnV
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.out"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #0: Thu Aug 24 15:22:20 CEST 2000
me@pogo:/usr/obj/usr/src/sys/pogo
Calibrating clock(s) ... TSC clock: 601371519 Hz, i8254 clock: 1193197 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
real memory = 201261056 (196544K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002df000 - 0x0bfe7fff, 198217728 bytes (48393 pages)
avail memory = 193060864 (188536K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f7050
bios32: Entry = 0xfd792 (c00fd792) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x216
pnpbios: Found PnP BIOS data at 0xc00f7080
pnpbios: Entry = f0000:af87 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f7030
Preloaded elf kernel "kernel" at 0xc02c6000.
Pentium Pro MTRR support enabled
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003b40
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x12eb, dev=0x0003, revid=0x03
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base fedc0000, size 18
map[14]: type 1, range 32, base 0000fcc0, size 3
map[18]: type 3, range 32, base 0000fcc8, size 3
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000fcd0, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 0000fce0, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x03
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00002180, size 4
found-> vendor=0x10ec, dev=0x8139, revid=0x10
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 0000f800, size 8
map[14]: type 1, range 32, base fedbfc00, size 8
found-> vendor=0x1180, dev=0x0476, revid=0x80
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=255
found-> vendor=0x1180, dev=0x0476, revid=0x80
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=255
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x5333, dev=0x8c10, revid=0x11
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base f0000000, size 27
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c10 graphics accelerator> (vendor=0x5333, dev=0x8c10) at 0.0 irq 9
pci0: <unknown card> (vendor=0x12eb, dev=0x0003) at 6.0 irq 10
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcd0
ata0: mask=03 status0=50 status1=50
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x9
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcd8
ata1: mask=00 status0=a5 status1=a5
ata1: probe allocation failed
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 irq 9
chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at device 7.3 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xf800-0xf8ff mem 0xfedbfc00-0xfedbfcff irq 9 at device 8.0 on pci0
rl0: Ethernet address: 00:e0:18:18:53:3a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
pcic-pci0: <Ricoh RL5C476 PCI-CardBus Bridge> at device 10.0 on pci0
pcic-pci0: Legacy address set to 0x3e0
PCI Config space:
00: 04761180 02100007 06070080 00820000
10: 00000000 020000dc 00000000 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 008001ff
40: 10441043 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00a00000 00000000 04630463 30000000
90: 00740000 00000000 00000000 00000000
Cardbus Socket registers:
00: f000ff53: f000ff53: f000e2c3: f000ff53:
10: f000ff53: f000ff54: f000a569: f000ff53:
ExCa registers:
00: 13 88 f5 5a 72 d0 80 e1 3f 74 c8 fa 66 8b 46 08
10: 52 66 0f b6 d9 66 31 d2 66 f7 f3 88 eb 88 d5 43
20: 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 00 00 fb 77
30: a2 86 c4 c0 c8 02 08 e8 40 91 88 fe 28 e0 8a 66
pcic-pci1: <Ricoh RL5C476 PCI-CardBus Bridge> at device 10.1 on pci0
PCI Config space:
00: 04761180 02100007 06070080 00820000
10: 00000000 020000dc 00000000 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 008002ff
40: 10441043 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00a00000 00000000 04630463 30000000
90: 00000000 00000000 00000000 00000000
Cardbus Socket registers:
00: f000ff53: f000ff53: f000e2c3: f000ff53:
10: f000ff53: f000ff54: f000a569: f000ff53:
ExCa registers:
00: 13 88 f5 5a 72 d0 80 e1 3f 74 c8 fa 66 8b 46 08
10: 52 66 0f b6 d9 66 31 d2 66 f7 f3 88 eb 88 d5 43
20: 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 00 00 fb 77
30: a2 86 c4 c0 c8 02 08 e8 40 91 88 fe 28 e0 8a 66
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata3: mask=00 status0=a5 status1=a5
ata3: probe allocation failed
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 90 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 90 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-master: success setting UDMA2 on PIIX4 chip
ad0: <IBM-DARA-212000/AR4OA51A> ATA-4 disk at ata0 as master
ad0: 11513MB (23579136 sectors), 23392 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=0
Creating DISK ad0
Creating DISK wd0
ata0-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-slave: success setting UDMA2 on PIIX4 chip
acd0: <TOSHIBA DVD-ROM SD-C2302/1713> DVD-ROM drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
ad0s1: type 0xb, start 63, end = 14333759, size 14333697 : OK
ad0s2: type 0xa5, start 14333760, end = 23148719, size 8814960 : OK
ad0s4: type 0xa0, start 23148720, end = 23572079, size 423360 : OK
start_init: trying /sbin/init
pcic: I/O win 0 flags 15 280-2bf
pcic: I/O win 0 flags 5 280-2bf
wi0: <WaveLAN/IEEE 802.11> at port 0x280-0x2bf irq 11 slot 0 on pccard0
pcic: I/O win 0 flags 15 280-2bf
wi0: Ethernet address: 00:60:1d:1c:5e:43
bpf: wi0 attached
Linux-ELF exec handler installed
arp: 10.0.1.1 is on rl0 but got reply from 00:d0:b7:0e:c6:47 on wi0
--HcAYCG3uE/tztfnV--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000824161639.C35337>