Date: Wed, 2 Aug 2006 20:40:22 GMT From: Marcel Moolenaar <marcel@xcllnt.net> To: freebsd-i386@FreeBSD.org Subject: Re: i386/100831: sio ignores BIOS information about serial ports - bounty offered Message-ID: <200608022040.k72KeMlH092960@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/100831; it has been noted by GNATS. From: Marcel Moolenaar <marcel@xcllnt.net> To: Bruce Evans <bde@zeta.org.au> Cc: Jo Rhett <jrhett@svcolo.com>, njl@freebsd.org, freebsd-gnats-submit@freebsd.org, freebsd-i386@freebsd.org Subject: Re: i386/100831: sio ignores BIOS information about serial ports - bounty offered Date: Wed, 2 Aug 2006 13:33:19 -0700 On Aug 2, 2006, at 12:32 PM, Bruce Evans wrote: > On Wed, 2 Aug 2006, Jo Rhett wrote: > >>> On Wed, 2 Aug 2006, Jo Rhett wrote: >>>> 1. We can't/won't fix the sio0<->sio1 problem because fixing >>>> ACPI is hard >> >> On Aug 2, 2006, at 10:25 AM, Bruce Evans wrote: >>> _I_ can't/won't fix it because not just the above :-). Swapping >>> of consoles >>> only could be fixed within the driver (so that ACPI is not >>> involved and >>> you don't have to change device.hints) since consoles have to be >>> hard-wired >>> in some way and the hints are good enough for wiring the unit >>> number to >>> the i/o address (provided it's an old ISA port -- otherwise hints >>> based >>> on the i/o address don't work). >> >> Sorry, color me dumb. I'm getting lost here. The problem I was >> observing is that device hints is being (mostly) ignored by ACPI >> and thus this is the root problem to fix. I'm not sure what >> you're trying to say here. > > Console drivers have to and do use the hints directly so as to work > before > bus stuff like ACPI is initializated. It is a mistake for console drivers to use the hints. It's a mistake even to use hints for anything else. The fundamental problem with hints is that they use a device numbering for identification. This is totally wrong for low-level consoles, because device numbers mean nothing at that time and are mostly wrong during bus enumeration, because you cannot generally predict device numbers. Low-level console drivers should only use I/O port or memory mapped I/O information to get to the hardware and hints for non-enumerating busses should only provide resource information. During bus enumeration this will eventually be mapped to device numbers and one can establish the logical connection between low-level consoles and high-level devices. Thus: hints are not hints, but a convoluted mix of enforced settings and suggestions that are partially and inconsistently used and there- fore much sooner the cause of problems that a solution to it. -- Marcel Moolenaar USPA: A-39004 marcel@xcllnt.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200608022040.k72KeMlH092960>