Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 21 Feb 1998 17:53:21 +0600 (OSK)
From:      Eugeny Kuzakov <kev@lab321.ru>
To:        questions@FreeBSD.ORG
Subject:   fbsd 2.1.7.1 and IDE ZIP iomega
Message-ID:  <Pine.BSF.3.96.SK.980221174838.15345A-100000@lab321.ru>

next in thread | raw e-mail | index | archive | help

Hi, All !

I have troubles with IDE ZIP IOMEGA work under fbsd 2.1.7.1.
dmeag output:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Probing for devices on PCI bus 0:
chip0 <Intel 82437FX PCI cache memory controller> rev 2 on pci0:0
chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0
chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1
ahc0 <Adaptec aic7850 SCSI host adapter> rev 0 int a irq 12 on pci0:18
ahc0: Using left over BIOS settings
ahc0: aic7850 Single Channel, SCSI Id=7, 3 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:1:0): "MICROP 4341NS P429" type 0 fixed SCSI 2
sd0(ahc0:1:0): Direct-Access 3940MB (8070564 512 byte sectors)
(ahc0:2:0): "MICROP 4421-07   05AVSJ 05AV" type 0 fixed SCSI 2
sd1(ahc0:2:0): Direct-Access 1955MB (4004219 512 byte sectors)
(ahc0:4:0): "TANDBERG  TDC 4100 =07:" type 1 removable SCSI 2
st0(ahc0:4:0): Sequential-Access density code 0x0, 512-byte blocks, write-enabled
de0 <Digital DC21041 Ethernet> rev 33 int a irq 11 on pci0:19
de0: DC21041 [10Mb/s] pass 2.1
de0: address 00:80:c8:59:85:1c
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0: disabled, not probed.
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
sio3 at 0x2e8-0x2ef irq 9 on isa
sio3: type 16550A
lpt0 at 0x378-0x37f on isa
lpt1: disabled, not probed.
psm0: disabled, not probed.
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xffffffff on isa
wdc0: unit 0 (wd0): <Seagate Technology 1275MB - ST31276A>, 32-bit, multi-block-16, sleep-hack
wd0: 1221MB (2501856 sectors), 2482 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0xffffffff on isa
wdc1: unit 0 (atapi): <NEC                 CD-ROM DRIVE:282/3.05>, removable, dma, iordy
wcd0: 1376Kb/sec, 128Kb cache, audio play, 256 volume levels, ejectable tray
wcd0: no disc inside, unlocked
wdc1: unit 1 (atapi): <IOMEGA  ZIP 100       ATAPI/23.D>, removable, intr, iordis
bt0: disabled, not probed.
uha0: disabled, not probed.
aha0: disabled, not probed.
aic0: disabled, not probed.
nca0: disabled, not probed.
nca1: disabled, not probed.
sea0: disabled, not probed.
wt0: disabled, not probed.
mcd0: disabled, not probed.
matcdc0: disabled, not probed.
scd0: disabled, not probed.
ie0: disabled, not probed.
ep0: disabled, not probed.
ix0: disabled, not probed.
le0: disabled, not probed.
lnc0: disabled, not probed.
ze0: disabled, not probed.
zp0: disabled, not probed.
npx0 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
ccd0-3: Concatenated disk drivers
IP firewall initialized, unlimited logging
de0: enabling 10baseT port
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~``

Which device should I mount ?
Thanks for advices.

--
	Best wishes, Eugeny Kuzakov
		Laboratory 321 ( Omsk, Russia )
		kev@lab321.ru
		ICQ#: 5885106



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.SK.980221174838.15345A-100000>