Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 19 Aug 1996 21:33:35 -0400 (EDT)
From:      Dave <partek@truly.indecent.com>
To:        questions@freebsd.org
Subject:   Sound Blaster support in 2.1.5R
Message-ID:  <Pine.BSF.3.91.960819213100.6748A-100000@truly.indecent.com>

Next in thread | Raw E-Mail | Index | Archive | Help
When trying to compile the sb/sb16 support into my kernel, I get this:

loading kernel
ioconf.o: Undefined symbol `_sbdriver' referenced from data segment
ioconf.o: Undefined symbol `_sbintr' referenced from data segment
*** Error code 1

If I felt like messing with it for a few hours, I'm sure I could figure 
it out.. But I'm planning a move and have been working alot lately, so 
I don't really wanna spend the time :) Here's my kernel config file if 
it's any help. 

TIA,

Dave



#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
#	$Id: GENERIC,v 1.46.2.18 1996/07/16 08:53:04 davidg Exp $
#

machine		"i386"
#cpu		"I386_CPU"
#cpu		"I486_CPU"
cpu		"I586_CPU"
ident		TRULY
maxusers	10

#options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3
#options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
options		UCONSOLE		#Allow users to grab the console

options		SYSVSHM
options		SYSVSEM
options		SYSVMSG

config		kernel	root on wd0 

controller	isa0
#controller	eisa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1
#tape		ft0	at fdc0 drive 2

controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

options         ATAPI   #Enable ATAPI support for IDE bus
device          wcd0    #IDE CD-ROM

#controller	ncr0
#controller	ahb0
#controller	ahc0

#controller	bt0	at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
#controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
#controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
#controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr

#controller	scbus0

#device		sd0

#device		st0

#device		cd0	#Only need one of these, the code dynamically grows

#device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr

#controller	matcd0	at isa? port 0x230 bio

#device		scd0	at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
#options		"PCVT_FREEBSD=210"	# pcvt running on FreeBSD 2.1
#options		XSERVER			# include code for XFree86
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

# Mandatory, don't remove
device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr

#
# Laptop support (see LINT for more options)
#
#device		apm0    at isa?		# Advanced Power Management
#options		APM_BROKEN_STATCLOCK	# Workaround some buggy APM BIOS

device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
device		sio2	at isa? disable port "IO_COM3" tty irq 5 vector siointr
device		sio3	at isa? disable port "IO_COM4" tty irq 9 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr
#device		lpt1	at isa? port? tty
#device		mse0	at isa? port 0x23c tty irq 5 vector mseintr
#device		psm0	at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr

device sb0      at isa? port 0x220 irq 5 drq 1 vector sbintr
#device sbxvi0   at isa? drq 5
#device sbmidi0  at isa? port 0x330
device qcam0    at isa? port "IO_LPT1" tty


# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device fxp0
#device vx0
device ed0 at isa? port 0x320 net irq  11 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
#pseudo-device	sl	1
# ijppp uses tun instead of ppp device
#pseudo-device	ppp	1
#pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960819213100.6748A-100000>