Date: Fri, 17 May 2002 14:57:36 +0200 From: Stanislav Grozev <tacho@factline.com> To: freebsd-mobile@freebsd.org Subject: NEWCARD and ComOne Platinum MC221 Modem Message-ID: <20020517125736.GA44662@meerkat.dungeon>
next in thread | raw e-mail | index | archive | help
--1UWUbFP1cBYEclgG Content-Type: multipart/mixed; boundary="/04w6evG8XlLl3ft" Content-Disposition: inline --/04w6evG8XlLl3ft Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi all, I have a Sony VAIO Picturebook PCG-C1VE, running -CURRENT (rebuild as of several hours), using NEWCARD. My 3Com network card is working perfectly, recognized as ep0. However, I also have a ComOne Platinum Card MC221 Discovery V.90 Data/Fax Modem. When I insert it, I get the following from the kernel: cardbus0: Expecting link target, got 0xff cardbus0: Resource not specified in CIS: id=3D10, size=3D100 cardbus0: Resource not specified in CIS: id=3D14, size=3D10 cardbus0: Resource not specified in CIS: id=3D18, size=3D100 cardbus0: <unknown card> (vendor=3D0x11c1, dev=3D0x044e) at 0.0 irq 9 pccbb0: CardBus card activation failed and the card obviously doesn't get recognized. I tried adding the following to /sys/dev/pccard/pccarddevs : vendor COMONE 0x11c1 ComOne product COMONE MC221 0x044e ComOne Platinum Card MC221 Discovery V.90 Modem and regenerating the header using make -f Makefile.pccarddevs, and then rebuilding the kernel with buildkernel/installkernel (I have the correct KERNCONF in my /etc/make.conf), but exactly the same happens - I would thing that at least the card would be recognized by name now, but to no avial. :-( So, any ideas how to proceed? Any help would be appreciated. PS. I am attaching the dmesg output and the kernel config file, which is a modified NEWCARD config, and also the /boot/device.hints, which is a standard NEWCARD.hints, with a modified memory address for the pcic0 device (the vaio works only with 0xd4000 instead of the default 0xd0000). -tacho --=20 [a lie is my shield] | [http://daemonz.org/ || tacho@daemonz.org] 0x44fc3339 || [02b5 798b 4bd1 97fb f8db 72e4 dca4 be03 44fc 3339] --/04w6evG8XlLl3ft Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.vaio" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #4: Fri May 17 14:23:41 CEST 2002 root@logrus.daemonz.org:/home/scratch/obj/usr/src/sys/LOGRUS Preloaded elf kernel "/boot/kernel/kernel" at 0xc047b000. Preloaded elf module "/boot/kernel/accf_http.ko" at 0xc047b0a8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc047b158. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 595504803 Hz CPU: Transmeta(tm) Crusoe(tm) Processor TM5600 (595.50-MHz 586-class CPU) Origin = "GenuineTMx86" Id = 0x543 real memory = 117374976 (114624K bytes) avail memory = 109264896 (106704K bytes) netsmb_dev: loaded Using $PIR table, 9 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <SONY P1 > on motherboard Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <PCI bus> on acpi_pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, USB> at device 7.2 (no driver attached) pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <serial bus, FireWire> at device 8.0 (no driver attached) pcm0: <Yamaha DS-1E (YMF754)> port 0x1080-0x1083,0x1000-0x103f mem 0xfc000000-0xfc007fff irq 9 at device 9.0 on pci0 pci0: <multimedia> at device 11.0 (no driver attached) pccbb0: <RF5C475 PCI-CardBus Bridge> at device 12.0 on pci0 cardbus0: <CardBus bus> on pccbb0 pccard0: <16-bit PCCard bus> on pccbb0 acpi_pcib0: device is routed to IRQ 9 pci0: <display, VGA> at device 13.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xd3fff on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec ad0: 11513MB <HITACHI_DK23AA-12> [23392/16/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s2a IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled cardbus0: Expecting link target, got 0xff cardbus0: Resource not specified in CIS: id=10, size=100 cardbus0: Resource not specified in CIS: id=14, size=10 cardbus0: Resource not specified in CIS: id=18, size=100 cardbus0: <unknown card> (vendor=0x11c1, dev=0x044e) at 0.0 irq 9 pccbb0: CardBus card activation failed ep0: <3Com 3c574-TX 10/100Mbps Ethernet> at port 0x100-0x11f irq 9 function 0 config 1 on pccard0 ep0: Ethernet address 00:50:04:58:e6:f3 swi_net: unregistered isr number: 18. swi_net: unregistered isr number: 18. --/04w6evG8XlLl3ft Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=LOGRUS Content-Transfer-Encoding: quoted-printable # $FreeBSD: src/sys/i386/conf/NEWCARD,v 1.62 2002/04/09 11:18:38 phk Exp $ machine i386 #cpu I486_CPU cpu I586_CPU #cpu I686_CPU ident LOGRUS maxusers 0 #To statically compile in device wiring instead of /boot/device.hints #hints "NEWCARD.hints" #Default places to look for devices. #makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MD_ROOT #MD is a potential root device options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options NFS_ROOT #NFS usable as root device, requires NFSCLIENT options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options KBD_INSTALL_CDEV # install a CDEV entry in /dev # Debugging for use in -current #options DDB #Enable the kernel debugger #options INVARIANTS #Enable calls of extra sanity checking #options INVARIANT_SUPPORT #Extra sanity checks of internal structures, re= quired by INVARIANTS #options WITNESS #Enable mutex checks to detects deadlocks and cycles #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa #device eisa device pci #options PCI_ENABLE_IO_MODES # Enable pci resources left off by a "lazy BI= OS" # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options! #device iir # Intel Integrated RAID #device mly # Mylex AcceleRAID/eXtremeRAID # SCSI peripherals device scbus # SCSI bus (required) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers #device aac # Adaptec FSA RAID #device amr # AMI MegaRAID #device ida # Compaq Smart RAID #device mlx # Mylex DAC960 family #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc 1 # At keyboard controller device atkbd # at keyboard device psm # psm mouse device vga # VGA screen # splash screen/screen saver device splash # syscons is the default console driver, resembling an SCO console device sc 1 # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # Pcmcia and cardbus bridge support device pccbb # cardbus (yenta) bridge device pccard device cardbus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer #device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device pcn # AMD Am79C97x PCI 10/100 NICs #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard nics included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of ethernet chips #device xe # Xircom pccard ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards #device an # Aironet 4500/4800 802.11 wireless NICs.=20 #device awi # BayStack 660 and others #device wi # WaveLAN/IEEE 802.11 wireless NICs.=20 #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support #device sl # Kernel SLIP #device ppp 1 # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet device pcm device agp device "r128drm" options DRM_DEBUG options SMBFS options LIBICONV options LIBMCHAIN options NETSMB options NETSMBCRYPTO --/04w6evG8XlLl3ft Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="device.hints" # $FreeBSD: src/sys/i386/conf/NEWCARD.hints,v 1.5 2001/11/11 20:19:36 imp Exp $ hint.fdc.0.at="isa" hint.fdc.0.port="0x3F0" hint.fdc.0.irq="6" hint.fdc.0.drq="2" hint.fd.0.at="fdc0" hint.fd.0.drive="0" hint.fd.1.at="fdc0" hint.fd.1.drive="1" hint.ata.0.at="isa" hint.ata.0.port="0x1F0" hint.ata.0.irq="14" hint.ata.1.at="isa" hint.ata.1.port="0x170" hint.ata.1.irq="15" hint.adv.0.at="isa" hint.bt.0.at="isa" hint.aha.0.at="isa" hint.aic.0.at="isa" hint.atkbdc.0.at="isa" hint.atkbdc.0.port="0x060" hint.atkbd.0.at="atkbdc" hint.atkbd.0.irq="1" hint.atkbd.0.flags="0x1" hint.psm.0.at="atkbdc" hint.psm.0.irq="12" hint.vga.0.at="isa" hint.sc.0.at="isa" hint.sc.0.flags="0x100" hint.vt.0.at="isa" hint.npx.0.at="nexus" hint.npx.0.port="0x0F0" hint.npx.0.irq="13" hint.apm.0.at="nexus" hint.apm.0.flags="0x20" hint.apm.0.disabled="1" hint.pmtimer.0.at="isa" hint.pcic.0.at="isa" hint.pcic.0.irq="10" hint.pcic.0.port="0x3e0" hint.pcic.0.maddr="0xd4000" hint.sio.0.at="isa" hint.sio.0.port="0x3F8" hint.sio.0.flags="0x10" hint.sio.0.irq="4" hint.sio.1.at="isa" hint.sio.1.port="0x2F8" hint.sio.1.irq="3" hint.sio.2.at="isa" hint.sio.2.disabled="1" hint.sio.2.port="0x3E8" hint.sio.2.irq="5" hint.sio.3.at="isa" hint.sio.3.disabled="1" hint.sio.3.port="0x2E8" hint.sio.3.irq="9" hint.ppc.0.at="isa" hint.ppc.0.irq="7" hint.ed.0.at="isa" hint.ed.0.port="0x280" hint.ed.0.irq="10" hint.ed.0.maddr="0xd8000" hint.cs.0.at="isa" hint.cs.0.port="0x300" hint.sn.0.at="isa" hint.sn.0.port="0x300" hint.sn.0.irq="10" hint.ie.0.at="isa" hint.ie.0.port="0x300" hint.ie.0.irq="10" hint.ie.0.maddr="0xd0000" hint.fe.0.at="isa" hint.fe.0.port="0x300" hint.le.0.at="isa" hint.le.0.port="0x300" hint.le.0.irq="5" hint.le.0.maddr="0xd0000" hint.lnc.0.at="isa" hint.lnc.0.port="0x280" hint.lnc.0.irq="10" hint.lnc.0.drq="0" --/04w6evG8XlLl3ft-- --1UWUbFP1cBYEclgG Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (FreeBSD) iD8DBQE85P4/3KS+A0T8MzkRAkFSAJkB6ZmFyMvSkcw6BzzT30k/Xn60FQCfRmlf pCTTq8JusHiDitz2sRj/tr0= =fpmR -----END PGP SIGNATURE----- --1UWUbFP1cBYEclgG-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020517125736.GA44662>