Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 26 Sep 2002 21:26:51 -0600 (MDT)
From:      "M. Warner Losh" <imp@bsdimp.com>
To:        Jacques.Caron@IPsector.com
Cc:        bms@spc.org, dan@langille.org, mobile@FreeBSD.ORG
Subject:   Re: getting wi running as a bridge
Message-ID:  <20020926.212651.129784946.imp@bsdimp.com>
In-Reply-To: <5.1.1.6.0.20020926115456.03ea3c10@pop.mail.yahoo.com>
References:  <3D91EAF6.18283.6741AB3F@localhost> <20020925214133.GQ26280@spc.org> <5.1.1.6.0.20020926115456.03ea3c10@pop.mail.yahoo.com>

next in thread | previous in thread | raw e-mail | index | archive | help
In message: <5.1.1.6.0.20020926115456.03ea3c10@pop.mail.yahoo.com>
            Jacques Caron <Jacques.Caron@IPsector.com> writes:
: And this won't work with two boxes configured as APs: they won't talk to 
: each other (only stations talk to APs). And regular stations can't bridge 
: (because of differences in the 802.11 frame format depending on whether the 
: source/destination MAC addresses match the wireless cards or something else).

This is true.  However, with one AP, it works great.  Multiple APs are
supported by the Linux hostap driver.

: To obtain a real 802.11 bridge, you need the cards to be able to run in 
: so-called WDS mode, but I'm not even sure this is supported with the PRISM 
: cards, let alone the Orinocos.

No.  WDS mode is used for repeaters, not for roaming between APs.

: Your only options are:
: - route instead of bridging: this requires 3 subnets (one for each LAN and 
: a /30 for the wireless link), and IP forwarding enabled
: - set up some form of tunnel
: - a specific case of the above, setup an IPsec VPN between the two boxes.
: 
: Note that the latter options probably require some sort of routing too, or 
: you'll need to do some fun things with proxy ARP or promiscuous mode somehow...

I'm not sure that I follow this advise.  It seems to not match with
the setup that I'm running right now typing this in.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020926.212651.129784946.imp>