Date: Mon, 26 May 2003 16:51:20 +1000 From: "Alastair G. Hogge" <agh@tpg.com.au> To: freebsd-current@FreeBSD.ORG Subject: ACPI timeout on shutdown Message-ID: <200305261651.20301.agh@tpg.com.au>
next in thread | raw e-mail | index | archive | help
Hello list,
Ever since upgrading my hardware I haven't been able to use shutdown -p now
successfully. One my old motherboard I used to use APM to have the computer
powerdown. Now on my new motherboard APM or ACPI won't work.
When the computer attempts to powerdown with ACPI it get a timeout and fails
and then informs me to press any key to reboot or simply turn off the box.
The same basicly happens when I push the power button except instead of
halting the machine reboots.
The following is returned by uname -a:
FreeBSD nova 5.1-BETA FreeBSD 5.1-BETA #3: Sun May 25 21:16:49 EST 2003
agh@nova:/usr/obj/usr/src/sys/NOVA i386
The following is from dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA #3: Sun May 25 21:16:49 EST 2003
agh@nova:/usr/obj/usr/src/sys/NOVA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04ff000.
Preloaded elf module "/boot/modules/cd9660.ko" at 0xc04ff244.
Preloaded elf module "/boot/modules/msdosfs.ko" at 0xc04ff2f0.
Preloaded elf module "/boot/modules/procfs.ko" at 0xc04ff3a0.
Preloaded elf module "/boot/modules/pseudofs.ko" at 0xc04ff44c.
Preloaded elf module "/boot/modules/md.ko" at 0xc04ff4fc.
Preloaded elf module "/boot/modules/linux.ko" at 0xc04ff5a4.
Preloaded elf module "/boot/modules/sysvshm.ko" at 0xc04ff650.
Preloaded elf module "/boot/modules/sysvsem.ko" at 0xc04ff700.
Preloaded elf module "/boot/modules/sysvmsg.ko" at 0xc04ff7b0.
Preloaded elf module "/boot/modules/if_ppp.ko" at 0xc04ff860.
Preloaded elf module "/boot/modules/if_tun.ko" at 0xc04ff90c.
Preloaded elf module "/boot/modules/miibus.ko" at 0xc04ff9b8.
Preloaded elf module "/boot/modules/if_sis.ko" at 0xc04ffa64.
Preloaded elf module "/boot/modules/ng_bpf.ko" at 0xc04ffb10.
Preloaded elf module "/boot/modules/netgraph.ko" at 0xc04ffbbc.
Preloaded elf module "/boot/modules/ng_ether.ko" at 0xc04ffc6c.
Preloaded elf module "/boot/modules/ng_ppp.ko" at 0xc04ffd1c.
Preloaded elf module "/boot/modules/snd_pcm.ko" at 0xc04ffdc8.
Preloaded elf module "/boot/modules/snd_emu10k1.ko" at 0xc04ffe78.
Preloaded elf module "/boot/modules/usb.ko" at 0xc04fff2c.
Preloaded elf module "/boot/modules/uhid.ko" at 0xc04fffd8.
Preloaded elf module "/boot/modules/ukbd.ko" at 0xc0500084.
Preloaded elf module "/boot/modules/ums.ko" at 0xc0500130.
Preloaded elf module "/boot/modules/umass.ko" at 0xc05001dc.
Preloaded elf module "/boot/modules/agp.ko" at 0xc0500288.
Preloaded elf module "/boot/modules/random.ko" at 0xc0500334.
Preloaded elf module "/boot/modules/linprocfs.ko" at 0xc05003e0.
Preloaded elf module "/boot/modules/fdc.ko" at 0xc0500490.
Preloaded elf module "/boot/modules/ppi.ko" at 0xc050053c.
Preloaded elf module "/boot/modules/acpi.ko" at 0xc05005e8.
link_elf: symbol ppb_request_bus undefined
KLD file ppi.ko - could not finalize loading
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2533058520 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2533.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536854528 (511 MB)
avail memory = 515981312 (492 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4S8X > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f1720
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 648 host to AGP bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on
pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, FireWire> at device 2.3 (no driver attached)
atapci0: <SiS 963 UDMA133 controller> port
0xa400-0xa40f,0xa800-0xa803,0xb000-0xb007,0xb400-0xb403,0xb800-0xb807 irq 11
at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 2.7 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xce000000-0xce000fff irq 9 at device 3.0
on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcd800000-0xcd800fff irq 9 at device 3.1
on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.14, addr 2,
iclass 3/1
ums0: 5 buttons and Z dir.
ohci2: <SiS 5571 USB controller> mem 0xcd000000-0xcd000fff irq 9 at device 3.2
on pci0
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ukbd0: KeyMouse USB/PS2 KEYBOARD, rev 1.10/0.01, addr 2, iclass 3/1
kbd1 at ukbd0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xcc800000-0xcc800fff irq 9 at
device 3.3 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
sis0: <SiS 900 10/100BaseTX> port 0x8800-0x88ff mem 0xcc000000-0xcc000fff irq
9 at device 4.0 on pci0
sis0: Ethernet address: 00:e0:18:b5:15:63
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0x8400-0x841f irq 9 at device 10.0 on pci0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
atapci1: <Promise PDC20376 SATA150 controller> port
0x7000-0x707f,0x7400-0x740f,0x7800-0x783f mem
0xcb000000-0xcb01ffff,0xcb800000-0xcb800fff irq 11 at device 14.0 on pci0
ata2: at 0xcb800000 on atapci1
ata3: at 0xcb800000 on atapci1
ata4: at 0xcb800000 on atapci1
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xccfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA133
acd0: CD-RW <SONY CD-RW CRX175E> at ata1-master WDMA2
Mounting root from ufs:/dev/ad0s2a
ums0: at uhub1 port 1 (addr 2) disconnected
ums0: detached
ukbd0: at uhub2 port 1 (addr 2) disconnected
ukbd0: detached
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.14, addr 2,
iclass 3/1
ums0: 5 buttons and Z dir.
ukbd0: KeyMouse USB/PS2 KEYBOARD, rev 1.10/0.01, addr 2, iclass 3/1
kbd1 at ukbd0
uhid0: KeyMouse USB/PS2 KEYBOARD, rev 1.10/0.01, addr 2, iclass 3/1
ppp0: bad fcs 3b1c, pkt len 37
ppp0: bad fcs 5264, pkt len 5
ppp0: no compressor for [15 3 29], 3
ppp0: no compressor for [1a 4 8], 4
ppp0: no compressor for [18 4 8], 4
ppp0: no compressor for [15 3 29], 3
ppp0: no compressor for [1a 4 8], 4
ppp0: no compressor for [18 4 8], 4
ppp0: no compressor for [1a 4 78], 4
ppp0: no compressor for [18 4 78], 4
ppp0: no compressor for [18 4 78], 4
ppp0: no compressor for [15 3 2f], 3
stray irq 7
stray irq 7
stray irq 7
stray irq 7
stray irq 7
got 5 stray irq 7's: not logging anymore
ppp0: bad fcs 3b1c, pkt len 37
ppp0: bad fcs 5264, pkt len 5
ppp0: no compressor for [15 3 29], 3
ppp0: no compressor for [1a 4 8], 4
ppp0: no compressor for [18 4 8], 4
ppp0: no compressor for [15 3 29], 3
ppp0: no compressor for [1a 4 8], 4
ppp0: no compressor for [18 4 8], 4
ppp0: no compressor for [1a 4 78], 4
ppp0: no compressor for [18 4 78], 4
ppp0: no compressor for [15 3 2f], 3
Thanks in advance
-Alastair
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200305261651.20301.agh>