Date: Thu, 17 Feb 2000 18:34:37 -0800 From: "nefr0ma" <archiver@db.geocrawler.com> To: freebsd-smp@freebsd.org Subject: Intel L440GX supported Message-ID: <200002180234.SAA32078@www.geocrawler.com>
next in thread | raw e-mail | index | archive | help
This message was sent from Geocrawler.com by "nefr0ma" <fmirand@yahoo.com>
Be sure to reply to that address.
Hi, I just want to inform to people interesed that
Intel L440GX server dual motherboad is *full*
compatible with FreeBSD 3.4, I write this because,
in the past, before buy it, noone was sure about
its support. Well maybe someone is (or will be) in
this situation I was; so, if you plan to buy it,
got for it.
dmesg:
FreeBSD 3.4-RELEASE #4: Sat Dec 4 06:13:06 COT
2000
root@*********:/usr/src/sys/compile/*************
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x653 Stepping = 3
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 127713280 (124720K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at
0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at
0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at
0xfec00000
Preloaded elf kernel "kernel" at 0xc02b6000.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443GX host to PCI bridge> rev 0x00
on pci0.0.0
chip1: <Intel 82443GX host to AGP bridge> rev 0x00
on pci0.1.0
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> rev
0x00 int a irq 19 on pci0.12.
ahc0: aic7896/97 Wide Channel A, SCSI Id=7, 16/255
SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> rev
0x00 int a irq 19 on pci0.12.
1
ahc1: aic7896/97 Wide Channel B, SCSI Id=7, 16/255
SCBs
fxp0: <Intel EtherExpress Pro 10/100B Ethernet>
rev 0x08 int a irq 21 on pci0.14
.0
fxp0: Ethernet address 00:a0:c9:ac:a4:1e
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02
on pci0.18.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller>
rev 0x01 on pci0.18.1
chip3: <Intel 82371AB Power management controller>
rev 0x02 on pci0.18.3
vga0: <Cirrus Logic model 00bc VGA-compatible
display device> rev 0x23 on pci0.2
0.0
Probing for devices on PCI bus 1:
chip4: <PCI to PCI bridge (vendor=1011
device=0023)> rev 0x06 on pci1.15.0
Probing for devices on PCI bus 2:
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <FUJITSU MPC3084AT>
wd0: 8063MB (16514064 sectors), 16383 cyls, 16
heads, 63 S/T, 512 B/S
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (ECP/PS2/NIBBLE) in
COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on
isa
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
changing root device to da0s1a
da0 at ahc1 bus 0 target 0 lun 0
da0: <COMPAQ MAB3045SC 0814> Fixed Direct Access
SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 31,
16bit), Tagged Queueing Enabled
da0: 4094MB (8386000 512 byte sectors: 255H 63S/T
522C)
and the mptable:
MPTable, version 2.0.15
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f6b70
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x3e
mode: Virtual Wire
MP Config Table Header:
physical address: 0x0009f960
signature: 'PCMP'
base table length: 276
version: 1.4
checksum: 0xc5
OEM ID: 'INTEL '
Product ID: 'Lancewood '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 26
local APIC address: 0xfee00000
extended table length: 164
extended table checksum: 225
MP Config Base Table Entries:
--
Processors: APIC ID Version State
Family Model Step Flags
1 0x11 BSP, usable
6 5 3 0x183fb
ff
0 0x11 AP, usable
6 5 3 0x183fb
ff
--
I/O APICs: APIC ID Version State
Address
2 0x11 usable
0xfec00000
well, i think that's all, If someone search this
mailing list with doubts about freebsd l440gx
support, it's ok, it works ;)
and when you read on the box "Design to maxime
server uptime"...hrm, belive it ;)
**********@***********$uptime
4:36PM up 87 days, 16 mins, 6 users, load
averages: 1.31, 1.17, 1.17
p.s. Well, a bit more specific, all onboard chip
(scsi, video, nic, ports,etc) are *full*
compatible.
Geocrawler.com - The Knowledge Archive
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200002180234.SAA32078>