Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Sep 1996 22:46:35 -0500
From:      Greg Flint <grflint@rs6000.cmp.ilstu.edu>
To:        freebsd-questions@FreeBSD.ORG
Subject:   Kernel Probs
Message-ID:  <2.2.16.19960909224637.2c0f82e4@rs6000.cmp.ilstu.edu>

Next in thread | Raw E-Mail | Index | Archive | Help
This is my Kernel conf file. I get an error when I do the make. If anyone
could help me out with this one I would greatly appreciate it.
System Specs
VESA Local Bus
1.44 FD
420 HDD
486-DX 33 8M RAM
1M VESA Video Card
No CD-Rom
If you need more specs, lemmie know. Thanks,
   Greg

#Kernel by Greg Flint created on 9-5-96 for Quantex 486-33 8M RAM
#
#

machine		"i386"
cpu		"I486_CPU"
ident		GRFKERNEL
maxusers	10

options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
#options	NFS			#Network Filesystem
#options	MSDOSFS			#MSDOS Filesystem
#options	"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3
options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
options		UCONSOLE		#Allow users to grab the console

options		SYSVSHM
options		SYSVSEM
options		SYSVMSG

config		kernel	root on wd0 

controller	isa0
controller	eisa0
#controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
#disk		fd1	at fdc0 drive 1
tape		ft0	at fdc0 drive 2

controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

#controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk		wd2	at wdc1 drive 0
#disk		wd3	at wdc1 drive 1

#options         ATAPI   #Enable ATAPI support for IDE bus
#device          wcd0    #IDE CD-ROM

controller	ncr0
controller	ahb0
controller	ahc0

#controller	bt0	at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
#controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
#controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
#controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr

#controller	scbus0

#device		sd0

#device		st0

#device		cd0	#Only need one of these, the code dynamically grows

#device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr

#controller	matcd0	at isa? port 0x230 bio

#device		scd0	at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
#options		"PCVT_FREEBSD=210"	# pcvt running on FreeBSD 2.1
#options		XSERVER			# include code for XFree86
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

# Mandatory, don't remove
device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr

#
# Laptop support (see LINT for more options)
#
#device		apm0    at isa?		# Advanced Power Management
#options		APM_BROKEN_STATCLOCK	# Workaround some buggy APM BIOS

device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
#device		sio2	at isa? disable port "IO_COM3" tty irq 5 vector siointr
#device		sio3	at isa? disable port "IO_COM4" tty irq 9 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr
#device		lpt1	at isa? port? tty
#device		mse0	at isa? port 0x23c tty irq 5 vector mseintr
#device		psm0	at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr
#device
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device de0
device fxp0
device vx0
#device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector
ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
pseudo-device	sl	1
# ijppp uses tun instead of ppp device
pseudo-device	ppp	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?2.2.16.19960909224637.2c0f82e4>