Date: Sat, 31 Jan 2004 01:43:10 +0100 From: Gregory Poudrel <chojin@chojin.info> To: freebsd-current@freebsd.org Subject: Kernel panic, pcmcia cardbus 32 bits Message-ID: <200401310143.12340.chojin@chojin.info>
next in thread | raw e-mail | index | archive | help
=2D----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello,
during making kerbel for 5.2 p1 I got a kernel panic due to my network card=
I=20
guess.
I was doing cvsup :)
Network card is a PCMCIA Peabird cardbus 32 bits 10/100 mbps on a laptop
here is dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
=46reeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a33244.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (366.60-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x66a Stepping =3D 10
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>
real memory =3D 167706624 (159 MB)
avail memory =3D 153280512 (146 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <NEC ND000008> on motherboard
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.DOCK._REG]=20
(Node 0xc236aea0), AE_NOT_EXIST
acpi0: could not initialise PciConfig handler: AE_NOT_EXIST
device_probe_and_attach: acpi0 attach returned 6
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00f5620
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on=20
motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:2 INTA BIOS irq 10
pci_cfgintr: 0:4 INTA BIOS irq 5
pci0: <display, VGA> at device 2.0 (no driver attached)
cbb0: <RF5C478 PCI-CardBus Bridge> at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:3 INTA routed to irq 10
cbb0: [MPSAFE]
cbb1: <RF5C478 PCI-CardBus Bridge> at device 3.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci_cfgintr: 0:3 INTB routed to irq 5
cbb1: [MPSAFE]
pci0: <multimedia, audio> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 o=
n=20
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff at devi=
ce=20
7.2 on pci0
pci_cfgintr: 0:7 INTD routed to irq 9
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port=20
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <AUI0200> can't assign resources (irq)
Timecounter "TSC" frequency 366597051 Hz quality 800
Timecounters tick every 10.000 msec
rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x88002000-0x880021=
ff=20
irq 5 at device 0.0 on cardbus1
rl0: Ethernet address: 00:40:f4:1c:3e:c9
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
GEOM: create disk ad0 dp=3D0xc23b9760
ad0: 4126MB <IBM-DKLA-24320> [8944/15/63] at ata0-master UDMA33
acd0: CDROM <MATSHITA CR-175> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Here is the kernel panic message:
rl0: discard oversize frame (ether type 3ec9 flags 3 len 33520 > max 1514)
=46atal trap 12: page fault while in kernel mode
cpuid =3D 0; apic id =3D 00
fault virtual address =3D 0xcb0fb000
fault code =3D supervisor read, page not present
instructor pointer =3D 0x8:0xc07d9276=20
stack pointer =3D 0x10:0xca2a1c30
frame pointer =3D 0x10:0xca2a1c5c
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, def32 1, gran 1
processor eflags =3D interrupt enabled, resume, IOPL =3D 0
current process =3D 16 (irq5: cbb1)
trap number =3D 12
panic: page fault
cpuid =3D 0;
syncing disc, buffers remaining... 1586 1586 1586 1586 1586 1586
Hope it helps.
=2D --=20
Gregory Poudrel
(Chojin)
=2D----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQFAGvoe+OqMRW168TIRArkEAJ4/H5lADRDV0uLwWdMaBJ1lQ02w7QCaAvLP
r+bNeraBdf2D/24S0pjSfg0=3D
=3DP7G7
=2D----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200401310143.12340.chojin>