Date: Thu, 6 Mar 2003 11:04:50 -0500 From: Anish Mistry <mistry.7@osu.edu> To: freebsd-questions@freebsd.org Subject: Could not allocate Bus space Message-ID: <200303061104.50810.mistry.7@osu.edu>
next in thread | raw e-mail | index | archive | help
I'm running 5.0-RELEASE on my laptop (Fujitsu P2110) and I'm trying to ge= t the=20 smb device working (it worked with 4.7). I am getting the following erro= r=20 when the driver trys to attach: alpm0: <AcerLabs M15x3 Power Management Unit> at device 6.0 on pci0 alpm0: Could not allocate Bus space device_probe_and_attach: alpm0 attach returned 6 Has anyone seen anything like this and is there a fix? Thanks in advance= =2E dmesg: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RELEASE #9: Thu Mar 6 10:28:09 EST 2003 amistry@littleguy.resnet.ohio-state.edu:/usr/obj/usr/src/sys/LITTLEGU= Y Preloaded elf kernel "/boot/kernel/kernel" at 0xc04ae000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04ae0a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 859335565 Hz CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (859.34-MHz 586-class CPU) Origin =3D "GenuineTMx86" Id =3D 0x543 real memory =3D 251527168 (239 MB) avail memory =3D 239239168 (228 MB) Initializing GEOMetry subsystem npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <FUJ PAULING2> on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE63 Using $PIR table, 9 entries at 0xc00fdf30 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0 acpi_cpu0: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <serial bus, USB> at device 2.0 (no driver attached) pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem 0xfc005000-0xfc005fff irq = 9 at=20 device 4.0 on pci0 alpm0: <AcerLabs M15x3 Power Management Unit> at device 6.0 on pci0 alpm0: Could not allocate Bus space device_probe_and_attach: alpm0 attach returned 6 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 cbb0: <TI1410 PCI-CardBus Bridge> irq 9 at device 12.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 atapci0: <AcerLabs Aladdin ATA66 controller> port 0x1800-0x180f at device= 15.0=20 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem 0xfc007800-0xfc00= 78ff=20 irq 9 at device 16.0 on pci0 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect = mode rl0: Ethernet address: 00:e0:00:ae:45:08 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <serial bus, FireWire> at device 19.0 (no driver attached) pci0: <display, VGA> at device 20.0 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 Fujitsu P-SERIES FUJ02B1 Driver Loaded. acpi_fjex0: <Fujitsu Function Buttons> on acpi0 orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% ad0: 19077MB <TOSHIBA MK2018GAP> [38760/16/63] at ata0-master UDMA66 acd0: CD-RW <TOSHIBA DVD-ROM SD-R2212> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s2a alpm0: <AcerLabs M15x3 Power Management Unit> at device 6.0 on pci0 alpm0: Could not allocate Bus space device_probe_and_attach: alpm0 attach returned 6 ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfc004000-0xfc004= fff=20 irq 11 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered alpm0: <AcerLabs M15x3 Power Management Unit> at device 6.0 on pci0 alpm0: Could not allocate Bus space device_probe_and_attach: alpm0 attach returned 6 --=20 Anish Mistry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303061104.50810.mistry.7>