Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 02 Jan 1999 02:29:52 -0800
From:      Mike Smith <mike@smith.net.au>
To:        Gregory Bond <gnb@itga.com.au>
Cc:        current@FreeBSD.ORG
Subject:   Re: SMC EtherEZ PnP 
Message-ID:  <199901021029.CAA76152@dingo.cdrom.com>
In-Reply-To: Your message of "Thu, 31 Dec 1998 16:25:26 %2B1100." <199812310525.QAA20771@melba.bby.com.au> 

next in thread | previous in thread | raw e-mail | index | archive | help
> I've got an SMC EtherEZ 8416 PnP card in an oldish P-100 system with a PnP
> BIOS. Neither the GENERIC kernel nor the boot floppy nor any kernel I can
> compile recognise this card. AFAICT from the mail list archives, this card (in
> a non-PnP version) should be supported by the ed driver.  There are no jumpers
> or anything to turn off Prug-n-pray or to set ports/irqs etc.
>  
> [As an aside: is there some easy way of mapping ethernet card or chipset to 
> driver name without "just knowing"?!?]

Not easily, no.

> I tried editing if_ed.c to add the correct PnP id to the ed_pnpids struct, but 
> at probe time I get the messages from boot -v:
> [...]
> vga0: <S3 868 graphics accelerator> rev 0x00 int a irq 12 on pci0.10.0
> Initializing PnP override table
> Probing for PnP devices:
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> PnP: CSN 2 COMP_DEVICE_ID = 0x0006d041
> CSN 1 Vendor ID: SMC8416 [0x1684a34d] Serial 0xc95830c0 Comp ID: @@@0000 [0x00000000]
> port 0x0240 0x0000 0x0000 0x0000 irq 11:0 drq 0:0 en 1
> port 0x0240 0x0000 0x0000 0x0000 irq 11:0 drq 0:0 en 1
> ed1: Invalid ISA memory address range configured: 0x0 - 0x2000

That's bad.  Make sure you have "non-PnP OS" selected in your BIOS 
settings.

-- 
\\  Sometimes you're ahead,       \\  Mike Smith
\\  sometimes you're behind.      \\  mike@smith.net.au
\\  The race is long, and in the  \\  msmith@freebsd.org
\\  end it's only with yourself.  \\  msmith@cdrom.com



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199901021029.CAA76152>