From owner-freebsd-questions Thu Mar 8 14:54: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from unix.megared.net.mx (megamail.megared.com.mx [200.52.207.52]) by hub.freebsd.org (Postfix) with ESMTP id 2375337B71A for ; Thu, 8 Mar 2001 14:53:46 -0800 (PST) (envelope-from ales@megared.net.mx) Received: from Alesito (ales.corp.megared.net.mx [200.52.193.2]) by unix.megared.net.mx (8.11.0/8.11.0) with SMTP id f28Mpv685233; Thu, 8 Mar 2001 16:51:58 -0600 (CST) (envelope-from ales@megared.net.mx) Message-ID: <001f01c0a822$6dc2a0c0$d3620a0a@megared.net.mx> From: "Alejandro A. Ramirez" To: "Soren Schmidt" Cc: Subject: ATA Driver fails in IBM 5000 Date: Thu, 8 Mar 2001 16:52:17 -0600 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Soren, I have several IBM Netfinity 5000, where I cant install, nor use the CDROM, that these servers have, because it fails whe I try to access the CDROM, it also used to crash in FreeBSD4.1, but I havent tried in 4.2, I think that it is going to crash, because I do receive the same errors that I had with FBSD4.1, This server had worked perfectly with FBSD3.4, and the CDROM too, but unfortunately, this hasnt been working since I upgraded to 4.1 & 4.2, I also have reported this to you in the past, I was expecting to work correctly with 4.2, but it didnt, here it is a verbose boot from the server with the GENERIC Kernel, you can see the errors when detecting the CDROM, I hope this can help you out to find the problem, If you think that you need more info on this, testing, or if you need access to the system, just let me know. Thanks for your Help !!! Ales cache# uname -a FreeBSD a.b.c.d 4.2-RELEASE FreeBSD 4.2-RELEASE #1: Mon Feb 12 13:06:12 CST 2001 root@a.b.c.d:/usr/src/sys/compile/kernel i386 boot -v Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000 jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC Calibrating clock(s) ... TSC clock: 598279226 Hz, i8254 clock: 1192939 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (598.40-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383fbff real memory = 1073725440 (1048560K bytes) Physical memory chunk(s): 0x00001000 - 0x0009cfff, 638976 bytes (156 pages) 0x0044f000 - 0x3fff3fff, 1069174784 bytes (261029 pages) avail memory = 1041539072 (1017128K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fd5d0 bios32: Entry = 0xfd5e1 (c00fd5e1) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xd61c pnpbios: Found PnP BIOS data at 0xc00fde90 pnpbios: Entry = f0000:499d Rev = 1.0 Other BIOS signatures found: ACPI: 000fdec0 Preloaded elf kernel "kernel.GENERIC" at 0xc0436000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x00000070 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166) npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166) pcib0: on motherboard found-> vendor=0x1166, dev=0x0007, revid=0x04 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 00000000, size 0 found-> vendor=0x1166, dev=0x0005, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x9004, dev=0x7895, revid=0x04 class=01-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 00002000, size 8 map[14]: type 1, range 32, base febff000, size 12 found-> vendor=0x9004, dev=0x7895, revid=0x04 class=01-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=10 map[10]: type 1, range 32, base 00002200, size 8 map[14]: type 1, range 32, base febfe000, size 12 found-> vendor=0x1022, dev=0x2000, revid=0x36 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 00002180, size 5 map[14]: type 1, range 32, base febfdc00, size 5 found-> vendor=0x5333, dev=0x8901, revid=0x16 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base f8000000, size 26 found-> vendor=0x1166, dev=0x0200, revid=0x4d class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0210, revid=0x4a class=01-01-ea, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=14 map[10]: type 1, range 32, base 000001f0, size 3 map[14]: type 1, range 32, base 000003f4, size 2 map[18]: type 1, range 32, base 00000000, size 3 map[1c]: type 1, range 32, base 00000000, size 2 map[20]: type 1, range 32, base 0000ffa0, size 4 found-> vendor=0x1166, dev=0x0220, revid=0x04 class=0c-03-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=7 map[10]: type 1, range 32, base ff700000, size 12 pci0: on pcib0 ahc0: port 0x2000-0x20ff mem 0xfebff000-0xfebfffff irq 9 at device 6 .0 on pci0 ahc0: Reading SEEPROM...done. ahc0: Low byte termination Enabled ahc0: High byte termination Enabled ahc0: Downloading Sequencer Program... 394 instructions downloaded aic7895C: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: port 0x2200-0x22ff mem 0xfebfe000-0xfebfefff irq 10 at device 6.1 on pci0 ahc1: Reading SEEPROM...done. ahc1: Low byte termination Enabled ahc1: High byte termination Enabled ahc1: Downloading Sequencer Program... 394 instructions downloaded aic7895C: Wide Channel B, SCSI Id=7, 32/255 SCBs pcn0: port 0x2180-0x219f mem 0xfebfdc00-0xfebfdc1f irq 11 at device 9.0 on p ci0 pcn0: Ethernet address: 00:06:29:50:c1:59 miibus0: on pcn0 ukphy0: on miibus0 ukphy0: OUI 0x080017, model 0x0001, rev. 0 ukphy0: no media present bpf: pcn0 attached pci0: (vendor=0x5333, dev=0x8901) at 10.0 irq 5 isab0: at device 15.0 on pci0 isa0: on isab0 atapci0: port 0xffa0-0xffaf,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 irq 14 at de vice 15.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=14 b=eb ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=00 status1=00 ata0: devices=04 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed ohci0: mem 0xff700000-0xff700fff irq 7 at device 15.2 on pci0 ohci0: (New OHCI DeviceId=0x02201166) usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166) pcib1: on motherboard found-> vendor=0x1014, dev=0x0022, revid=0x07 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=2 secondarybus=2 pci1: on pcib1 pcib2: at device 5.0 on pci1 found-> vendor=0x0e11, dev=0xae10, revid=0x04 class=01-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=15 map[10]: type 1, range 32, base 00005100, size 8 map[14]: type 1, range 32, base c0800000, size 8 pci2: on pcib2 ida0: port 0x5100-0x51ff mem 0xc0800000-0xc08000ff irq 15 at device 0.0 on pci2 ida0: drives=1 firm_rev=4.16 idad0: on ida0 idad0: 69427MB (142188000 sectors), blocksize=512 Creating DISK idad0 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata3: mask=00 status0=ff status1=ff ata3: probe allocation failed ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0 adv0 failed to probe at port 0x330 on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x41 0x41 0x41 0x41 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300 on isa0 sn0 failed to probe at port 0x300 irq 10 on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors 0 accounted for Device configuration finished. bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c0c0, tty 630012, net 670812 bpf: sl0 attached ata0-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata0-master: success setting PIO4 on generic chip (null): MODE_SENSE_BIG command timeout - resetting ata0: resetting devices .. ata0: mask=01 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=14 b=eb ata0-slave: ATAPI probe a=00 b=00 ata0: mask=01 status0=00 status1=00 ata0: devices=04 done (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 (null): read data overrun 2/0 acd0: CDROM drive at ata0 as master acd0: read 500KB/s (10517KB/s), 1792KB buffer, PIO4 acd0: Reads: CD-RW acd0: Mechanism: caddy acd0: Medium: CD-ROM 120mm audio disc loaded Waiting 15 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (probe14:ahc0:0:15:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe14:ahc0:0:15:0): ILLEGAL REQUEST asc:24,0 (probe14:ahc0:0:15:0): Invalid field in CDB (ahc0:A:13:0): Sending WDTR 1 (ahc0:A:13:0): Received WDTR 1 filtered to 1 ahc0: target 13 using 16bit transfers (ahc0:A:13:0): Sending SDTR period 2b, offset 8 (ahc0:A:13:0): Received SDTR period 2b, offset 8 Filtered to period 2b, offset 8 ahc0: target 13 synchronous at 5.7MHz, offset = 0x8 (ahc0:A:12:0): Sending WDTR 1 (ahc0:A:12:0): Received WDTR 1 filtered to 1 ahc0: target 12 using 16bit transfers (ahc0:A:12:0): Sending SDTR period 2b, offset 8 (ahc0:A:12:0): Received SDTR period 2b, offset 8 Filtered to period 2b, offset 8 ahc0: target 12 synchronous at 5.7MHz, offset = 0x8 (ahc0:A:11:0): Sending WDTR 1 (ahc0:A:11:0): Received WDTR 1 filtered to 1 ahc0: target 11 using 16bit transfers (ahc0:A:11:0): Sending SDTR period 2b, offset 8 (ahc0:A:11:0): Received SDTR period 2b, offset 8 Filtered to period 2b, offset 8 ahc0: target 11 synchronous at 5.7MHz, offset = 0x8 (ahc0:A:10:0): Sending WDTR 1 (ahc0:A:10:0): Received WDTR 1 filtered to 1 ahc0: target 10 using 16bit transfers (ahc0:A:10:0): Sending SDTR period 2b, offset 8 (ahc0:A:10:0): Received SDTR period 2b, offset 8 Filtered to period 2b, offset 8 ahc0: target 10 synchronous at 5.7MHz, offset = 0x8 (ahc0:A:9:0): Sending WDTR 1 (ahc0:A:9:0): Received WDTR 1 filtered to 1 ahc0: target 9 using 16bit transfers (ahc0:A:9:0): Sending SDTR period 2b, offset 8 (ahc0:A:9:0): Received SDTR period 2b, offset 8 Filtered to period 2b, offset 8 ahc0: target 9 synchronous at 5.7MHz, offset = 0x8 (ahc0:A:8:0): Sending WDTR 1 (ahc0:A:8:0): Received WDTR 1 filtered to 1 ahc0: target 8 using 16bit transfers (ahc0:A:8:0): Sending SDTR period 2b, offset 8 (ahc0:A:8:0): Received SDTR period 2b, offset 8 Filtered to period 2b, offset 8 ahc0: target 8 synchronous at 5.7MHz, offset = 0x8 Creating DISK da0 Creating DISK da1 Creating DISK da2 Creating DISK da3 Creating DISK da4 Creating DISK da5 pass0 at ahc0 bus 0 target 8 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number LR64141800007019L46P pass0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 9 lun 0 pass1: Fixed Direct Access SCSI-2 device pass1: Serial Number LR737043000010161WC2 pass1: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass2 at ahc0 bus 0 target 10 lun 0 pass2: Fixed Direct Access SCSI-2 device pass2: Serial Number LR735673000010200VZL pass2: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass3 at ahc0 bus 0 target 11 lun 0 pass3: Fixed Direct Access SCSI-2 device pass3: Serial Number LR73091000001005HSW1 pass3: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass4 at ahc0 bus 0 target 12 lun 0 pass4: Fixed Direct Access SCSI-2 device pass4: Serial Number LR64130900007019L3AC pass4: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass5 at ahc0 bus 0 target 13 lun 0 pass5: Fixed Direct Access SCSI-2 device pass5: Serial Number LR735032000010200MLT pass5: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass6 at ahc0 bus 0 target 15 lun 0 pass6: Removable Processor SCSI-3 device pass6: 3.300MB/s transfers pass6 at ahc0 bus 0 target 15 lun 0 pass6: Removable Processor SCSI-3 device pass6: 3.300MB/s transfers da0 at ahc0 bus 0 target 8 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number LR64141800007019L46P da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da1 at ahc0 bus 0 target 9 lun 0 da1: Fixed Direct Access SCSI-2 device da1: Serial Number LR737043000010161WC2 da1: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da2 at ahc0 bus 0 target 10 lun 0 da2: Fixed Direct Access SCSI-2 device da2: Serial Number LR735673000010200VZL da2: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da3 at ahc0 bus 0 target 11 lun 0 da3: Fixed Direct Access SCSI-2 device da3: Serial Number LR73091000001005HSW1 da3: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da3: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da4 at ahc0 bus 0 target 12 lun 0 da4: Fixed Direct Access SCSI-2 device da4: Serial Number LR64130900007019L3AC da4: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da4: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da5 at ahc0 bus 0 target 13 lun 0 da5: Fixed Direct Access SCSI-2 device da5: Serial Number LR735032000010200MLT da5: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da5: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) no devsw (majdev=0 bootdev=0xa0200000) Mounting root from ufs:/dev/idad0s1a idad0s1: type 0xa5, start 0, end = 142187999, size 142188000 : OK start_init: trying /sbin/init da3s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da4s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da2s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da1s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da0s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da5s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da0s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da1s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da2s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da3s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da4s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK da5s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message