Date: Sat, 31 Aug 2002 22:04:22 +0200 (CEST) From: Marc Fonvieille <blackend@FreeBSD.org> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/42262: -CURRENT hangs at boot on ACER 507DX Message-ID: <200208312004.g7VK4Mnx000373@marduk.blackend.org>
next in thread | raw e-mail | index | archive | help
>Number: 42262 >Category: kern >Synopsis: -CURRENT hangs at boot on ACER 507DX >Confidential: no >Severity: serious >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat Aug 31 13:10:01 PDT 2002 >Closed-Date: >Last-Modified: >Originator: Marc Fonvieille >Release: FreeBSD 5-STABLE i386 >Organization: FreeBSD.org >Environment: >Description: A -CURRENT kernel hangs at boot on a laptop ACER 507DX after these lines: pci0: <PCI bus> on pcib0 pci0: <multimedia, audio> at device 0.1 (no driver attached) pci0: <simple comms> at device 0.2 (no driver attached) pci0: <display, VGA> at device 2.0 (no driver attached) cbb0: <O2Mirco OZ6812/6872 PCI-CardBus Bridge> irq 11 at device 6.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x8000-0x800f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x8000 I used a live-cd from from Sat Aug 17 for that test. I had a similar problem in past with 4.1-STABLE, have a look at: http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/21323 The problem was fixed, however if I add sound support in a 4.X kernel, I have the same hang: pccard0: <PC Card bus (classic)> on pcic0 isab0: <Intel 82443MX PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x8000-0x800f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x8000 It really seems to be the same problem. Here's a boot -v from a working -STABLE kernel: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-STABLE #12: Fri Aug 9 16:48:23 CEST 2002 marc@marduk.blackend.org:/usr/src/sys/compile/MARDUK Calibrating clock(s) ... TSC clock: 466574612 Hz, i8254 clock: 1193181 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (466.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 167706624 (163776K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00368000 - 0x09fe7fff, 164102144 bytes (40064 pages) avail memory = 159797248 (156052K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f0280 bios32: Entry = 0xf0210 (c00f0210) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x0 pnpbios: Found PnP BIOS data at 0xc00f61a0 pnpbios: Entry = fa000:0 Rev = 1.0 pnpbios: Event flag at 4b0 Other BIOS signatures found: ACPI: 000fe030 Preloaded elf kernel "kernel" at 0xc0341000. Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=71948086) pcibios: No call entry point apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443MX host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x7194, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7195, revid=0x00 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 found-> vendor=0x8086, dev=0x7196, revid=0x00 class=07-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 found-> vendor=0x10c8, dev=0x0004, revid=0x01 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0c000000, size 24 map[14]: type 1, range 32, base 0b400000, size 21 map[18]: type 1, range 32, base 0b300000, size 20 found-> vendor=0x1217, dev=0x6872, revid=0x05 class=06-07-00, hdrtype=0x02, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 found-> vendor=0x8086, dev=0x7198, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7199, revid=0x00 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 00008000, size 4 found-> vendor=0x8086, dev=0x719a, revid=0x00 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=10 map[20]: type 1, range 32, base 00007cc0, size 5 found-> vendor=0x8086, dev=0x719b, revid=0x00 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 0000f100, size 4 pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x8086, dev=0x7195) at 0.1 irq 11 pci0: <unknown card> (vendor=0x8086, dev=0x7196) at 0.2 irq 11 pci0: <NeoMagic MagicGraph 128XD SVGA controller> (vendor=0x10c8, dev=0x0004) at 2.0 irq 5 pcic0: <O2micro 6812/6872 PCI-Cardbus Bridge> irq 11 at device 6.0 on pci0 pcic0: PCI Memory allocated: 0x88000000 pcic0: Warning: O2micro OZ68xx chips may not work pcic0: PCI Configuration space: 0x00: 0x68721217 0x04100007 0x06070005 0x00022000 0x10: 0x88000000 0x020000a0 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000001 0x30: 0x00000001 0x00000001 0x00000001 0x04a0010b 0x40: 0x100b1025 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00071c02 0x90: 0x00000002 0x00000000 0x00000000 0x00000000 0xa0: 0x7e020001 0x00c04000 0x00000012 0x0000000d 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x08004000 0x028203ea 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pccard0: <PC Card bus (classic)> on pcic0 isab0: <Intel 82443MX PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x8000-0x800f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x8000 ata0: mask=03 ostat0=50 ostat2=00 ata0-slave: ATAPI 14 eb ata0-master: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=09 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x8008 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82443MX USB controller> port 0x7cc0-0x7cdf irq 10 at device 7.2 on pci0 usb0: <Intel 82443MX USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82443MX Power management controller> port 0xf100-0xf10f at device 7.3 on pci0 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number pcic-: pcic0 exists, using next available unit number pcic-: pcic1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic1 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic2: not probed (disabled) sio0: irq maps: 0x841 0x851 0x851 0x851 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x841 0x841 0x841 0x841 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 isa_probe_children: probing PnP devices pcic0: Event mask 0x6 BIOS Geometries: 0:024efe3f 0..590=591 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c440, tty 631892, net 671892 ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: success setting UDMA2 on Intel chip Creating DISK ad0 pcic0: Autodetected 5.0V card pccard: card inserted, slot 0 pcic0: reset 1 int is 90 stat is 7f pccard: card removed, slot 0 ar: FreeBSD check1 failed ad0: <IBM-DARA-206000/AR1OA51A> ATA-4 disk at ata0-master ad0: 4645MB (9514260 sectors), 10068 C, 15 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=4 cblid=0 ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata0-slave: success setting PIO4 on generic chip acd0: <CD-224E/1.5A> CDROM drive at ata0 as slave acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-DA stream acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 9510479, size 9510417 : OK start_init: trying /sbin/init pcic0: reset 1 int is 90 stat is 7f pcic0: Autodetected 5.0V card pccard: card inserted, slot 0 pcic0: reset 2 int is f0 stat is 5f pcic0: reset 3 int is f0 stat is 5f pcic0: reset 0 splash: image decoder found: rain_saver Linux ELF exec handler installed pccard0: Assigning ed0: io 0x240-0x25f irq 11 mem 0x0-0xffffffff pcic: I/O win 0 flags 15 240-25f ed0: Forcing IRQ to 11 pcic: I/O win 0 flags 5 240-25f ed0 at port 0x240-0x25f irq 11 flags 0x80000 slot 0 on pccard0 pcic: I/O win 0 flags 15 240-25f ed0: Forcing IRQ to 11 using shared irq11. bpf: ed0 attached ed0: address 00:e0:98:7a:f5:61, type Linksys (16 bit) ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x0010dd, model 0x0001, rev. 2 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ed0: device timeout pcic0: Event mask 0x8 >How-To-Repeat: Get an ACER 507DX and boot on a -CURRENT kernel. >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200208312004.g7VK4Mnx000373>