Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 15 May 2000 10:48:06 -0400
From:      "Charles Anderson" <caa@columbus.rr.com>
To:        FreeBSD Mobile <freebsd-mobile@FreeBSD.ORG>, FreeBSD Multimedia ML <freebsd-multimedia@FreeBSD.ORG>
Subject:   Sound support on Thinkpad 600X under current
Message-ID:  <20000515104806.A3928@midgard.dhs.org>

next in thread | raw e-mail | index | archive | help
I am trying to get sound to work on my IBM Thinkpad 600X under current.

All I get is static.
Here is sndstat & dmesg output.  One thing I noticed is that pcm, usb & display
are all using irq 11.

# uname -a
FreeBSD domino 4.0-RELEASE FreeBSD 4.0-RELEASE #0: Sun May 14 20:54:57 EDT 2000     toor@domino:/usr/src/sys/compile/DOMINO  i386
# cat /dev/sndstat
FreeBSD Audio Driver (newpcm) May 14 2000 20:54:17
Installed devices:
pcm0: <CS461x PCM Audio> at irq 11 (1p/1r channels duplex)
# dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Sun May 14 20:54:57 EDT 2000
    toor@domino:/usr/src/sys/compile/DOMINO
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (498.27-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory  = 335347712 (327488K bytes)
config> di sn0
No such device: sn0
Invalid command or syntax.  Type `?' for help.
config> di lnc0
config> di le0
No such device: le0
Invalid command or syntax.  Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax.  Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax.  Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax.  Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax.  Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax.  Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax.  Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax.  Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax.  Type `?' for help.
config> q
avail memory = 322080768 (314532K bytes)
Preloaded elf kernel "DOMINO" at 0xc02d3000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02d309c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NeoMagic MagicMedia 256ZX SVGA controller> at 0.0 irq 11
pcic-pci0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at device 2.0 on pci0
pcic-pci1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at device 2.1 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x0449) at 3.0 irq 11
csa0: <Crystal Semiconductor CS4614/4622/4624 Audio accelerator/4280 Audio controller> mem 0x50000000-0x500fffff,0x50100000-0x50100fff irq 11 at device 6.0 on pci0
pcm0: <CS461x PCM Audio> on csa0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
intpm0: <Intel 82371AB Power management controller> port 0xefa0-0xefaf irq 9 at device 7.3 on pci0
intpm0: I/O mapped efa0
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped ef00 
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ad0: 11509MB <IBM-DARA-212000> [24944/15/63] at ata0-master using UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2302> at ata0-slave using WDMA2
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 0
pid 53 (checkvm), uid 0: exited on signal 10 (core dumped)
ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 3 slot 0 on pccard0
ep0: Ethernet address 00:60:08:db:d7:80
ep0: supplying EUI64: 00:60:08:ff:fe:db:d7:80
ep0: starting DAD for fe80:0008::0260:08ff:fedb:d780
ep0: DAD complete for fe80:0008::0260:08ff:fedb:d780 - no duplicates found
pid 382 (toolbox-wish), uid 1281: exited on signal 10
pid 501 (xfs.xtt), uid 0: exited on signal 6 (core dumped)
pid 506 (toolbox-wish), uid 1281: exited on signal 10
pid 540 (xfs.xtt), uid 0: exited on signal 6 (core dumped)
pid 545 (toolbox-wish), uid 1281: exited on signal 10

-- 
Charles Anderson	caa@columbus.rr.com

No quote, no nothin'


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000515104806.A3928>