Date: Fri, 15 Oct 2004 21:24:46 +0200 From: FreeBsdBeni <freebsdbeni@spymac.com> To: Peter Seebach <seebs@plethora.net> Cc: freebsd-questions@freebsd.org Subject: Re: atapicam, cdrecord, and my gaping clue deficiency Message-ID: <200410152124.47313.freebsdbeni@spymac.com> In-Reply-To: <200410150331.i9F3VScu008372@herd.plethora.net> References: <200410150331.i9F3VScu008372@herd.plethora.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 15 October 2004 05:32, Peter Seebach wrote: > Hardware: SuperMicro X5DE8-GG motherboard, dual Xeon 2.8Ghz, 2GB memory. > Using onboard SCSI controller for disks, onboard IDE for DVD burner. DVD > burner is a Pioneer DVR-108. > > Software: cdrecord and/or cdrecord-ProDVD. > > Problem: CD burning Always Fails. Failure mode is 100% repeatable and > consistent: > > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > CDB: 2A 00 00 00 01 55 00 00 1F 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.000s timeout 40s > write track data: error after 698368 bytes > Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 08 00 00 00 00 > > Mr. Schilling says "Install a non-defective kernel." I am assuming that > this doesn't mean "some other OS". > > Googling around on the CDB bytes turns up lots of people with cabling > problems, especially on SCSI busses. > > Googling around on FreeBSD and 698368 turns up someone who needed the > P1003_1B option added to a kernel. (It's now just the _KPOSIX option, and > it's already in there.) > > I got as far as putting in the atapicam and related devices. This happens > whether or not I leave the atapicd driver in place. (dmesg output below is > without.) > > I enclose dmesg and config file as attachments for perusal. I am Very > Worried by the observation that the CD is claiming a 3.300MB/sec transfer > rate: > > cd0 at ata0 bus 0 target 0 lun 0 > cd0: <PIONEER DVD-RW DVR-108 1.10> Removable CD-ROM SCSI-0 device > cd0: 3.300MB/s transfers > Hi, I'm having _exactly_ the same problem... :-( Mine is a Pioneer DVR-107D, firmware v1.18 on a 5.2.1-REL-p11. dmesg : cd1 at ata1 bus 0 target 0 lun 0 cd1: <PIONEER DVD-RW DVR-107D 1.18> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers. I got the same reply from mr. Schilling and I haven't found any solution yet... Could it be something with the drives/firmware ? Beni.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200410152124.47313.freebsdbeni>