From owner-freebsd-questions Sat Oct 16 16:35:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from imo11.mx.aol.com (imo11.mx.aol.com [198.81.17.1]) by hub.freebsd.org (Postfix) with ESMTP id D660B14D39 for ; Sat, 16 Oct 1999 16:35:25 -0700 (PDT) (envelope-from ATeslik@aol.com) Received: from ATeslik@aol.com by imo11.mx.aol.com (mail_out_v23.6.) id 8UDMa05338 (3951); Sat, 16 Oct 1999 19:34:48 -0400 (EDT) From: ATeslik@aol.com Message-ID: <0.5621f61d.253a6597@aol.com> Date: Sat, 16 Oct 1999 19:34:47 EDT Subject: Re: can't ping win95 machine To: bright@wintelcom.net Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: AOL 4.0 for Windows 95 sub 26 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In a message dated 10/16/1999 4:12:46 PM Pacific Daylight Time, bright@wintelcom.net writes: << On Sat, 16 Oct 1999 ATeslik@aol.com wrote: > In a message dated 10/16/1999 1:53:51 PM Pacific Daylight Time, > ChrisMic@clientlogic.com writes: > > << It may help us if you can provied the output of a couple things. > > >> ifconfig -a > > pn0: flags=8843 mtu 1500 inet > 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255 > ether 87:ff:87:ff:87:ff > media: autoselect (10baseT/UTP ) > supported media: autoselect 100baseT4 100baseTX > 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP > 10baseT/UTP > lp0: flags=8810 mtu 1500 > tun0: flags=8010 mtu 1500ppp0: > flags=8010 mtu 1500 > lo0: flags=8049 mtu 16384 > inet 127.0.0.1 netmask 0xff000000 > > > I'm using a linksys LNE100TXII NIC with the "pn" (PNIC) driver in my kernel. > > >> ping > > PING 192.168.1.2 (192.168.1.2): 56 data bytes--- > ping: sendto: Host is down > ping: sendto: Host is down > 192.168.1.2 ping statistics ---6 packets transmitted, 0 packets received, > 100% packet loss > > >> ping (from the windows machine). > > > Pinging 192.168.1.3 with 32 bytes of data: > > Request timed out. > Request timed out. > Request timed out. > Request timed out. > > If theres anymore input I can offer, let me know! At this point I'll do just > about anything to get this working. Thanks again! >>>Can you telnet or ftp? With a stock FreeBSD install i'm suspecting that >>>some software on the win95 machine may be tripping you up. You know, I thought so too! When I was trying Linux a while back I could. For some reason though, I can't with FreeBSD. Tried CuteFTP and Simple Telnet. Nothing. >>>I also noticed that the pn0 is saying "full duplex" since you are >>>on a hub it should be set to half-duplex: >>>ifconfig pn0 mediaopt half-duplex >>>then try again. I tried this, got an error: SIOCSIFMEDIA: Device not configured then I noticed that my card is set: media: autoselect (10baseT/UTP ) I think those other settings are just options on the card, but it is actually set half-duplex. >>>you may want to put that at the end of your ifconfig line >>>in /etc/rc.conf. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message