Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 17 Apr 2011 17:15:48 +0200 (CEST)
From:      Oliver Fromme <olli@lurza.secnetix.de>
To:        freebsd-multimedia@FreeBSD.ORG, hselasky@c2i.net
Subject:   Re: USB microphone problems
Message-ID:  <201104171515.p3HFFmfg081665@lurza.secnetix.de>
In-Reply-To: <201104151023.p3FAN5IR071125@lurza.secnetix.de>

next in thread | previous in thread | raw e-mail | index | archive | help
Oliver Fromme wrote:
 > Hans Petter Selasky wrote:
 > > === uaudio.c
 > > ==================================================================
 > > --- uaudio.c    (revision 220305)
 > > +++ uaudio.c    (local)
 > > @@ -1360,11 +1360,10 @@
 > >             sc->sc_mixer_iface_index);
 > >  
 > >         /*
 > > -        * If just one sampling rate is supported,
 > > -        * no need to call "uaudio_set_speed()".
 > > -        * Roland SD-90 freezes by a SAMPLING_FREQ_CONTROL request.
 > > +        * Only set the sample rate if the channel reports that it
 > > +        * supports the frequency control.
 > >          */
 > > -       if (ch->p_asf1d->bSamFreqType != 1) {
 > > +       if (ch->p_sed->bmAttributes & UA_SED_FREQ_CONTROL) {
 > >                 if (uaudio_set_speed(sc->sc_udev, endpoint, ch->sample_rate)) 
 > > {
 > >                         /*
 > >                          * If the endpoint is adaptive setting the speed may
 > > 
 > > Could you try the patch above? /sys/dev/sound/usb/uaudio.c
 > 
 > Thanks!  It works, but I still have to do "usbconfig -d 3.2 reset"
 > after plugging in the webcam.  Without the reset, it does not work.

For testing purposes I bought another webcam that seems to
be very popular.  It's a Logitech C310 HD.  (The one that I
already have is a C210, non-HD.)

I can confirm that that your patch also works the same with
that new webcam.

I can also confirm that a Philips SPC 900 NC webcam still
works fine with that patch (it worked fine before, too),
so there is no regression.  This one uses 44.1 kHz; the 
Logitech ones use 48 kHz.

Therefore I think the patch can be commited.

There is still the problem that the Logitech cameras seem
to need a reset after plugging in.  Furthermore I can't
change the mic level with mixer(8).  Both of these problems
do _not_ exist with the Philips webcam.

Best regards
   Oliver

-- 
Oliver Fromme, secnetix GmbH & Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606,  Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758,  Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf Gebhart

FreeBSD-Dienstleistungen, -Produkte und mehr:  http://www.secnetix.de/bsd

"A misleading benchmark test can accomplish in minutes
what years of good engineering can never do." -- Dilbert (2009-03-02)



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201104171515.p3HFFmfg081665>