Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 27 Nov 1995 13:31:15 -0600 (CST)
From:      mikebo@tellabs.com
To:        bugs@freebsd.org
Cc:        mikebo (Mike Borowiec), hackers@freebsd.org, questions@freebsd.org
Subject:   2.0.5R: SCSI hang and panic... HELP
Message-ID:  <199511271931.NAA03249@sunc210.hq.tellabs.com>

next in thread | raw e-mail | index | archive | help
I'm having tape drive problems...
I'm trying to back-up my 2.0.5R machine to 8mm Exabyte, but every time
I get close to finishing my tar backup, this happens:

ahc0: target 0, lun 0 (sd0) timed out
ahc0: target 0, lun 0 (sd0) timed out
...[repeats]...

SCSI bus hangs, and I'm forced to reboot system...

Rarely, the above messages are followed by:
ahc_scsi_cmd0: more than 256 DMA segs
sd0: oops not queued
biodone: buffer already done

Once, this even happened:
/: bad dir ino 2 at offset 0: mangled entry
panic: bad dir
dumping to dev 40, offset 32768
ahc0: not responding

The machine is a 486DX50 EISA/VESA w/16MB, with an Adaptec 2742AT EISA
SCSI card. Please find dmesg output below... The system kernel is all
generic 2.0.5R EXCEPT it has an updated st.c:
($Id: st.c,v 1.38 1995/07/16 09:13:14 gibbs Exp $).

Anyone see this before... know of a solution?
Any suggestions would be most appreciated... Thanks!
- Mike

--------------------------------------------------------------------------
Included dmesg output:
FreeBSD 2.0.5-RELEASE #0: Fri Sep  1 00:16:43 CDT 1995
    kroot@timesink:/usr/src/sys/compile/TIMESINK
CPU: i486DX (486-class CPU)
real memory  = 16384000 (4000 pages)
avail memory = 14749696 (3601 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 9 maddr 0xd4000 msize 16384 on isa
ed0: address 00:00:c0:d1:09:2d, type WD8013EP (16 bit) 
bpf: ed0 attached
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
mse0 at 0x23c irq 3 on isa
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
ahc0: reading board settings
ahc0: 274x Twin Channel, A SCSI Id=7, B SCSI Id=7, aic7770 >= Rev E, 4 SCBs
ahc0: Using Level Sensitive Interrupts
ahc0: Downloading Sequencer Program...Done
ahc0 at 0x5000-0x50ff irq 11 on eisa slot 5
ahc0: Probing channel A
ahc0 waiting for scsi devices to settle
ahc0: target 0 synchronous at 4.4MB/s, offset = 0xf
(ahc0:0:0): "IMPRIMIS 94601-15 1250" type 0 fixed SCSI 1
sd0(ahc0:0:0): Direct-Access 989MB (2026965 512 byte sectors)
ahc0: target 1 synchronous at 10.0MB/s, offset = 0xf
(ahc0:1:0): "MAXTOR XT-4380S B5A" type 0 fixed SCSI 1
sd1(ahc0:1:0): Direct-Access 318MB (651630 512 byte sectors)
(ahc0:2:0): "ARCHIVE VIPER 150  20000 -000" type 1 removable SCSI 1
st0(ahc0:2:0): Sequential-Access st0: Archive  Viper 150 is a known rogue
density code 0x0,  drive empty
(ahc0:5:0): "EXABYTE EXB-8200 4.25" type 1 removable SCSI 1
st1(ahc0:5:0): Sequential-Access density code 0x0, drive empty
(ahc0:6:0): "NEC CD-ROM DRIVE:501 2.2" type 5 removable SCSI 2
cd0(ahc0:6:0): CD-ROM cd present.[313218 x 2048 byte records]
ahc0: Probing Channel B
ahc0 waiting for scsi devices to settle
ahb0 not found
aha0 not found at 0x330
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
sb0: <SoundBlaster Pro 3.2>
opl0 at 0x388 on isa
opl0: <Yamaha OPL-3 FM>
bpf: lo0 attached
bpf: ppp0 attached
bpf: sl0 attached

-- 
--------------------------------------------------------------------------
Michael Borowiec   -   mikebo@tellabs.com   -   Tellabs Operations Inc.
Senior Member of Technical Staff                4951 Indiana Avenue, MS 63
708-512-8211  FAX: 708-512-7099                 Lisle, IL  60532  USA
--------------------------------------------------------------------------



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199511271931.NAA03249>