Date: Tue, 1 Sep 2009 19:13:10 +0300 From: Eugene Perevyazko <john@dnepro.net> To: freebsd-net@freebsd.org Cc: Pyun YongHyeon <pyunyh@gmail.com> Subject: Re: D-Link DGE-560SX (Marvell 88E8061-based) doesn't see link Message-ID: <20090901161310.GA37481@traktor.dnepro.net> In-Reply-To: <20090826094856.GC10790@traktor.dnepro.net> References: <20090821142039.GA40018@traktor.dnepro.net> <20090821221932.GE1262@michelle.cdnetworks.com> <20090825083857.GA22983@traktor.dnepro.net> <20090825114649.GA11642@traktor.dnepro.net> <20090825130821.GA41669@traktor.dnepro.net> <20090825182553.GD1282@michelle.cdnetworks.com> <20090826093916.GB10790@traktor.dnepro.net> <20090826094856.GC10790@traktor.dnepro.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Aug 26, 2009 at 12:48:56PM +0300, Eugene Perevyazko wrote: > On Wed, Aug 26, 2009 at 12:39:16PM +0300, Eugene Perevyazko wrote: > > On Tue, Aug 25, 2009 at 11:25:53AM -0700, Pyun YongHyeon wrote: > > > > > > Try attached patch and let me know how it goes on your box. > > > You can see statistics counters maintained in driver with sysctl. > > > "sysctl dev.msk.0.stats" will show some numbers if it can see > > > packets on wire. > > > > With attached patch NIC doesn't see link again. > > All counters in dev.msk.0.stats are 0s. > > > > At the same time the link led on NIC is on, and switch shows that port is up. > That's different from the unpatched system, where led was off and switch port > was down. > Any chances to get that NIC working? I tried to look at linux driver for it (sk98lin) but quickly got lost - it's about 700 lines only for SkGmInitPhyMarv() - Initialize the Marvell PHY registers And hw programming is definitely not my expertise :( -- Eugene Perevyazko
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090901161310.GA37481>