Date: Sat, 17 Dec 2005 00:21:36 +0200 From: Ruslan Ermilov <ru@freebsd.org> To: Jeremy Messenger <mezz7@cox.net> Cc: cvs-src@freebsd.org, src-committers@freebsd.org, John Baldwin <jhb@freebsd.org>, cvs-all@freebsd.org Subject: Re: cvs commit: src/sys/pci amdpm.c Message-ID: <20051216222136.GK41326@ip.net.ua> In-Reply-To: <op.s1wcvae39aq2h7@mezz.mezzweb.com> References: <200512161503.jBGF3GZb075045@repoman.freebsd.org> <200512161039.57740.jhb@freebsd.org> <20051216160946.GF41326@ip.net.ua> <op.s1waswjj9aq2h7@mezz.mezzweb.com> <20051216214540.GI41326@ip.net.ua> <op.s1wcvae39aq2h7@mezz.mezzweb.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--OGLMwEELQbPC02lM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Dec 16, 2005 at 04:03:00PM -0600, Jeremy Messenger wrote: > >Yes. Please change ID_NFORCE2 define in pci_pm.h (in xmbmon sources) > >from 0x006410DE to 0x008410DE, this will "add support for your SMBus > >controller to xmbmon". I doubt it will ever work, but just to be > >absolutely sure, try again mbmon commands I asked and show me the > >output. >=20 > # mbmon -A -d > Summary of Detection: > * SMB monitor(s)[ioctl:NVidia nForce2]: > ** Genesys Logic GL518SM_rev80 found at slave address: 0x58. > * ISA monitor(s): > ** Winbond Chip W83627HF/THF/THF-A found. > ** Int.Tec.Exp. Chip IT8705F/IT8712F or SIS950 found. >=20 > # mbmon -S 8 >=20 > Temp.=3D 9.0, 0.0, 0.0; Rot.=3D 937, 0, 0 > Vcore =3D 2.74, 0.00; Volt. =3D 2.74, 3.31, 11.48, 0.00, 0.00 >=20 > Temp.=3D 25.0, 0.0, 0.0; Rot.=3D 833, 0, 0 > Vcore =3D 3.04, 0.00; Volt. =3D 3.04, 3.68, 12.76, 0.00, 0.00 >=20 > Temp.=3D 41.0, 0.0, 0.0; Rot.=3D 750, 0, 0 > Vcore =3D 3.34, 0.00; Volt. =3D 3.34, 4.05, 14.03, 0.00, 0.00 >=20 > Temp.=3D 57.0, 0.0, 0.0; Rot.=3D 681, 0, 0 > Vcore =3D 2.43, 0.00; Volt. =3D 2.43, 2.94, 10.20, 0.00, 0.00 >=20 > Temp.=3D 9.0, 0.0, 0.0; Rot.=3D 937, 0, 0 > Vcore =3D 2.74, 0.00; Volt. =3D 2.74, 3.31, 11.48, 0.00, 0.00 >=20 Not surprisingly that I get exactly the same nonsense on my nForce3: amdpm0@pci0:1:1: class=3D0x0c0500 card=3D0x80c51043 chip=3D0x00d410d= e rev=3D0xa4 hdr=3D0x00 vendor =3D 'NVIDIA Corporation' device =3D 'nForce MCP3? SMBus Controller' class =3D serial bus subclass =3D SMBus =2E/mbmon -S -d Using SMBus-ioctl access method[NVidia nForce2]!! * Genesys Logic GL518SM_rev80 found. =2E/mbmon -S -c8 1 Temp.=3D 9.0, 0.0, 0.0; Rot.=3D 937, 0, 0 Vcore =3D 2.74, 0.00; Volt. =3D 2.74, 3.31, 11.48, 0.00, 0.00 Temp.=3D 25.0, 0.0, 0.0; Rot.=3D 833, 0, 0 Vcore =3D 3.04, 0.00; Volt. =3D 3.04, 3.68, 12.76, 0.00, 0.00 Temp.=3D 41.0, 0.0, 0.0; Rot.=3D 750, 0, 0 Vcore =3D 3.34, 0.00; Volt. =3D 3.34, 4.05, 14.03, 0.00, 0.00 Temp.=3D 57.0, 0.0, 0.0; Rot.=3D 681, 0, 0 Vcore =3D 2.43, 0.00; Volt. =3D 2.43, 2.94, 10.20, 0.00, 0.00 Temp.=3D 9.0, 0.0, 0.0; Rot.=3D 937, 0, 0 Vcore =3D 2.74, 0.00; Volt. =3D 2.74, 3.31, 11.48, 0.00, 0.00 Temp.=3D 25.0, 0.0, 0.0; Rot.=3D 833, 0, 0 Vcore =3D 3.04, 0.00; Volt. =3D 3.04, 3.68, 12.76, 0.00, 0.00 Temp.=3D 41.0, 0.0, 0.0; Rot.=3D 750, 0, 0 Vcore =3D 3.34, 0.00; Volt. =3D 3.34, 4.05, 14.03, 0.00, 0.00 Temp.=3D 57.0, 0.0, 0.0; Rot.=3D 681, 0, 0 Vcore =3D 2.43, 0.00; Volt. =3D 2.43, 2.94, 10.20, 0.00, 0.00 Exactly the same non-sense, with cycle count of four. OK, I'm going to add a true AMD-8111 SMBus 2.0 support which should also cover nForce-2/3/4 chipsets. For now, John, I believe you're safe to revert your commit (I'll make it a separate driver, nf2pm.c perhaps). Cheers, --=20 Ruslan Ermilov ru@FreeBSD.org FreeBSD committer --OGLMwEELQbPC02lM Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (FreeBSD) iD8DBQFDoz3wqRfpzJluFF4RAvfLAJ4i5st5Uxz+/FlKY6BdFI7QTFh2awCfUgJo eOLx5hwz5OutgyWY1fjZpX4= =kRVu -----END PGP SIGNATURE----- --OGLMwEELQbPC02lM--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051216222136.GK41326>