Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 16 Oct 1999 20:52:20 EDT
From:      ATeslik@aol.com
To:        ChrisMic@clientlogic.com
Cc:        freebsd-questions@freebsd.org
Subject:   Re: can't ping win95 machine
Message-ID:  <0.b9f5b142.253a77c4@aol.com>

Next in thread | Raw E-Mail | Index | Archive | Help


<< Can the FreeBSD machine ping itself?

I can ping both the localhost (127.0.0.1) and the pn0 NIC card (192.168.1.3)
 
<< Do you have IPFIREWALL compiled into your kernel?
 
No, I don't...I'll try that. I'm not running ipfw though as I'm not planning 
for a firewall, but I'll try that. I'm crazy at this point ~8o)
Thanks!
 
 > -----Original Message-----
 > From:    ATeslik@aol.com [SMTP:ATeslik@aol.com]
 > Sent:    Saturday, October 16, 1999 7:35 PM
 > To:  bright@wintelcom.net
 > Cc:  freebsd-questions@freebsd.org
 > Subject: Re: can't ping win95 machine
 > 
 > In a message dated 10/16/1999 4:12:46 PM Pacific Daylight Time, 
 > bright@wintelcom.net writes:
 > 
 > << On Sat, 16 Oct 1999 ATeslik@aol.com wrote:
 >  
 >  > In a message dated 10/16/1999 1:53:51 PM Pacific Daylight Time, 
 >  > ChrisMic@clientlogic.com writes:
 >  > 
 >  > << It may help us if you can provied the output of a couple things.
 >  >  
 >  > >> ifconfig -a
 >  > 
 >  > pn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
 > inet 
 >  > 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255
 >  >     ether 87:ff:87:ff:87:ff     
 >  >     media: autoselect (10baseT/UTP <half-duplex>)
 >  >     supported media: autoselect 100baseT4 100baseTX <full-duplex>
 >  >     100baseTX <half-duplex> 100baseTX 10baseT/UTP <full-duplex> 
 > 10baseT/UTP 
 >  >     <half-duplex> 10baseT/UTP
 >  > lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
 >  > tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500ppp0: 
 >  > flags=8010<POINTOPOINT,MULTICAST> mtu 1500
 >  > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
 >  >     inet 127.0.0.1 netmask 0xff000000 
 >  > 
 >  > 
 >  > I'm using a linksys LNE100TXII NIC with the "pn" (PNIC) driver in my 
 > kernel.
 >  > 
 >  > >> ping <windows-ip>
 >  > 
 >  > PING 192.168.1.2 (192.168.1.2): 56 data bytes---
 >  > ping: sendto: Host is down
 >  > ping: sendto: Host is down
 >  > 192.168.1.2 ping statistics ---6 packets transmitted, 0 packets
 > received, 
 >  > 100% packet loss
 >  > 
 >  > >> ping <freebsd-ip> (from the windows machine).
 >  > 
 >  > 
 >  > Pinging 192.168.1.3 with 32 bytes of data:
 >  > 
 >  > Request timed out.
 >  > Request timed out.
 >  > Request timed out.
 >  > Request timed out.
 >  > 
 >  > If theres anymore input I can offer, let me know! At this point I'll do
 > 
 > just 
 >  > about anything to get this working. Thanks again!
 >  
 >  >>>Can you telnet or ftp?  With a stock FreeBSD install i'm suspecting
 > that
 >  >>>some software on the win95 machine may be tripping you up.
 >  
 > You know, I thought so too! When I was trying Linux a while back I could.
 > For 
 > some reason though, I can't with FreeBSD. Tried CuteFTP and Simple Telnet.
 > 
 > Nothing.
 > 
 >  >>>I also noticed that the pn0 is saying "full duplex" since you are
 >  >>>on a hub it should be set to half-duplex:
 >  
 >  >>>ifconfig pn0 mediaopt half-duplex
 >  
 >  >>>then try again.
 > 
 > I tried this, got an error:
 > SIOCSIFMEDIA: Device not configured
 > then I noticed that my card is set:
 > media: autoselect (10baseT/UTP <half-duplex>)
 > I think those other settings are just options on the card, but it is
 > actually 
 > set half-duplex.
 >  
 > >>>you may want to put that at the end of your ifconfig line
 >  >>>in /etc/rc.conf.
 >  
 > 
 > 
 > To Unsubscribe: send mail to majordomo@FreeBSD.org
 > with "unsubscribe freebsd-questions" in the body of the message
 
 
 To Unsubscribe: send mail to majordomo@FreeBSD.org
 with "unsubscribe freebsd-questions" in the body of the message
 
 
 ----------------------- Headers --------------------------------
 Return-Path: <owner-freebsd-questions@FreeBSD.ORG>
 Received: from  rly-zc04.mx.aol.com (rly-zc04.mail.aol.com [172.31.33.4]) by 
air-zc04.mail.aol.com (v62.10) with ESMTP; Sat, 16 Oct 1999 20:15:13 -0400
 Received: from  hub.freebsd.org (hub.freebsd.org [204.216.27.18]) by 
rly-zc04.mx.aol.com (v61.13) with ESMTP; Sat, 16 Oct 1999 20:14:56 -0400
 Received: by hub.freebsd.org (Postfix, from userid 538)
    id 90B7414CEB; Sat, 16 Oct 1999 17:14:52 -0700 (PDT)
 Received: from localhost (localhost [127.0.0.1])
    by hub.freebsd.org (Postfix) with SMTP
    id 7F43D1CD44C; Sat, 16 Oct 1999 17:14:52 -0700 (PDT)
    (envelope-from owner-freebsd-questions)
 Received: by hub.freebsd.org (bulk_mailer v1.12); Sat, 16 Oct 1999 17:14:52 
-0700
 Delivered-To: freebsd-questions@freebsd.org
 Received: from ns.clientlogic.com (ns.clientlogic.com [207.51.66.75])
    by hub.freebsd.org (Postfix) with ESMTP id E523614C8E
    for <freebsd-questions@freebsd.org>; Sat, 16 Oct 1999 17:14:48 -0700 (PDT)
    (envelope-from ChrisMic@clientlogic.com)
 Received: by site0s1 with Internet Mail Service (5.5.2650.21)
    id <40N6DZ5V>; Sat, 16 Oct 1999 20:14:54 -0400
 Message-ID: <6C37EE640B78D2118D2F00A0C90FCB4401105CFD@site2s1>
 From: Christopher Michaels <ChrisMic@clientlogic.com>
 To: "'ATeslik@aol.com'" <ATeslik@aol.com>
 Cc: freebsd-questions@freebsd.org
 Subject: RE: can't ping win95 machine
 Date: Sat, 16 Oct 1999 20:17:59 -0400
 MIME-Version: 1.0
 X-Mailer: Internet Mail Service (5.5.2650.21)
 Content-Type: text/plain
 Sender: owner-freebsd-questions@FreeBSD.ORG
 X-Loop: FreeBSD.ORG
 Precedence: bulk
 
  >>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?0.b9f5b142.253a77c4>