Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 09 Apr 2012 21:57:13 +1000
From:      Da Rock <freebsd-questions@herveybayaustralia.com.au>
To:        freebsd-questions@freebsd.org
Subject:   Re: problem with Xorg
Message-ID:  <4F82CE99.2060005@herveybayaustralia.com.au>
In-Reply-To: <4F82CA46.7000700@bananmonarki.se>
References:  <4F82BC35.6070504@bananmonarki.se> <4F82C20F.9070904@herveybayaustralia.com.au> <4F82CA46.7000700@bananmonarki.se>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On 04/09/12 21:38, Bernt Hansson wrote:
> 2012-04-09 13:03, Da Rock skrev:
>> On 04/09/12 20:38, Bernt Hansson wrote:
>>> Hello list.
>>>
>>> When I try to start X I'm getting this error
>>
>> Yep. This one will be fun... :)
>>>
>>> X.Org X Server 1.7.7
>>> Release Date: 2010-05-04
>>> X Protocol Version 11, Revision 0
>>> Build Operating System: FreeBSD 8.2-RELEASE i386
>>> Current Operating System: FreeBSD kw.fqdn 8.2-RELEASE FreeBSD
>>> 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011
>>> root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>>> Build Date: 09 April 2012  02:21:53AM
>>>
>>> Current version of pixman: 0.24.2
>>>          Before reporting problems, check http://wiki.x.org
>>>          to make sure that you have the latest version.
>>> Markers: (--) probed, (**) from config file, (==) default setting,
>>>          (++) from command line, (!!) notice, (II) informational,
>>>          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr  9 12:30:37 2012
>>> (==) Using default built-in configuration (30 lines)
>>> (EE) LoadModule: Module fbdevhw does not have a fbdevhwModuleData data
>>> object.
>>> (EE) Failed to load module "fbdevhw" (invalid module, 0)
>>> Setting master
>>> The XKEYBOARD keymap compiler (xkbcomp) reports:
>>>> Warning:          Type "ONE_LEVEL" has 1 levels, but<RALT>  has 2
>>> symbols
>>>>                    Ignoring extra symbols
>>> Errors from xkbcomp are not fatal to the X server
>>> xinit: connection to X server lost
>>>
>>> waiting for X server to shut down Dropping master
>>
>> First some questions:
>>
>> 1. Does the machine lock up when you run X?
>
> No It doesn't but no picture.
>
>> 2. Do you know what video card you're using?
>
> Intel 845
>
>> 3. What is the output of pciconf -lv, dmesg?
>
> pciconf -lv
> hostb0@pci0:0:0:0:      class=0x060000 card=0x00000000 chip=0x25608086 
> rev=0x01 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'DRAM Controller / Host-Hub I/F Bridge 
> (82845G/GL/GV/GE/PE)'
>     class      = bridge
>     subclass   = HOST-PCI
> vgapci0@pci0:0:2:0:     class=0x030000 card=0x00b90e11 chip=0x25628086 
> rev=0x01 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82845G/GL/GV/GE/PE Integrated Graphics Device'
>     class      = display
>     subclass   = VGA
> uhci0@pci0:0:29:0:      class=0x0c0300 card=0x00b90e11 chip=0x24c28086 
> rev=0x01 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI 
> Controller *1'
>     class      = serial bus
>     subclass   = USB
> uhci1@pci0:0:29:1:      class=0x0c0300 card=0x00b90e11 chip=0x24c48086 
> rev=0x01 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI 
> Controller *2'
>     class      = serial bus
>     subclass   = USB
> ehci0@pci0:0:29:7:      class=0x0c0320 card=0x00b90e11 chip=0x24cd8086 
> rev=0x01 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI 
> Controller'
>     class      = serial bus
>     subclass   = USB
> pcib1@pci0:0:30:0:      class=0x060400 card=0x00000000 chip=0x244e8086 
> rev=0x81 hdr=0x01
>     vendor     = 'Intel Corporation'
>     device     = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub 
> Interface to PCI Bridge'
>     class      = bridge
>     subclass   = PCI-PCI
> isab0@pci0:0:31:0:      class=0x060100 card=0x00000000 chip=0x24c08086 
> rev=0x01 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge'
>     class      = bridge
>     subclass   = PCI-ISA
> atapci0@pci0:0:31:1:    class=0x01018a card=0x00b90e11 chip=0x24cb8086 
> rev=0x01 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82801DB/DBL (ICH4/ICH4-L) UltraATA/100 EIDE Controller'
>     class      = mass storage
>     subclass   = ATA
> pcm0@pci0:0:31:5:       class=0x040100 card=0x00ad0e11 chip=0x24c58086 
> rev=0x01 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Realtek AC97 Audio (82801DBM SoundMAXController 
> (ICH4-M B0 step))'
>     class      = multimedia
>     subclass   = audio
> fxp0@pci0:5:8:0:        class=0x020000 card=0x00120e11 chip=0x103b8086 
> rev=0x81 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82801DB/DBL (ICH4/ICH4-L) PRO/100 VM Network 
> Connection'
>     class      = network
>     subclass   = ethernet
>
>> 4. What does Xorg -configure produce?
>
> No idea, haven't tried it. Using HAL.

Given your previous answers, I'd say you _have_ to run it. Then the last 
option I offered _will_ work. You need to force it to use vesa and that 
is the only way.

As a last chance perhaps run X -conf /root/xorg.conf.new -retro and see 
if it does happen to work; this shows up the old test pattern so that 
you can see that X is actually running instead of a black screen.
>
>> Finally, can you change the driver setting in the xorg.conf.new to vesa
>> and run X -conf /root/xorg.conf.new and see if it works then?
>
> Well, starting X from remote it seems to catch on.
>
> Hmmm....Only as root. Well I'll try to rebuild it without SUID.
>
> This is from remote AND root
>
> X.Org X Server 1.7.7
> Release Date: 2010-05-04
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 8.2-RELEASE i386
> Current Operating System: FreeBSD kw.fqdn 8.2-RELEASE FreeBSD 
> 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011 
> root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
> Build Date: 09 April 2012  02:21:53AM
>
> Current version of pixman: 0.24.2
>         Before reporting problems, check http://wiki.x.org
>         to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
>         (++) from command line, (!!) notice, (II) informational,
>         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr  9 13:27:32 2012
> (==) Using default built-in configuration (30 lines)
> (EE) LoadModule: Module fbdevhw does not have a fbdevhwModuleData data 
> object.
> (EE) Failed to load module "fbdevhw" (invalid module, 0)
> Setting master
>
> ^Cxinit: connection to X server lost
>
> waiting for X server to shut down xterm: fatal IO error 35 (Resource 
> temporarily unavailable) or KillClient on X server ":0"
> xterm: fatal IO error 35 (Resource temporarily unavailable) or 
> KillClient on X server ":0"
> XIO:  fatal IO error 22 (Unknown error: 0) on X server ":0"
>       after 576 requests (576 known processed) with 0 events remaining.
> xterm: fatal IO error 35 (Resource temporarily unavailable) or 
> KillClient on X server ":0"
> Dropping master
>
> xinit: unexpected signal 2
>
>
>
>> Good luck!
>
> I'll need it thank you.
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "freebsd-questions-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?4F82CE99.2060005>