Date: Tue, 07 Nov 2006 23:28:27 +0300 From: Boris Samorodov <bsam@ipt.ru> To: Joe Marcus Clarke <marcus@FreeBSD.org> Cc: freebsd-gnome@FreeBSD.org Subject: Re: Can't burn CD/DVD Message-ID: <24314292@srv.sem.ipt.ru> In-Reply-To: <90394466@srv.sem.ipt.ru> (Boris Samorodov's message of "Tue, 07 Nov 2006 23:25:33 %2B0300") References: <1162907902.1212.6.camel@lihong-nb.local> <4550C20B.4050509@FreeBSD.org> <15352312@srv.sem.ipt.ru> <4550D8A1.7080506@FreeBSD.org> <90394466@srv.sem.ipt.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 07 Nov 2006 23:25:33 +0300 Boris Samorodov wrote: > > I need the lshal output and everything else talked about in FAQ > > questions 15 and 19. Sorry, forgot a full dmesg. Here it is: ----- Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #0: Sat Nov 4 19:20:02 MSK 2006 bsam@srv.sem.ipt.ru:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <Nvidia AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2009.27-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x40fb2 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> Cores per package: 2 real memory = 1073676288 (1023 MB) avail memory = 1023918080 (976 MB) ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <Nvidia AWRDACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <display, VGA> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) pci0: <memory, RAM> at device 10.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 11.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 23 at device 14.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <multimedia> at device 6.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0xac00-0xac3f mem 0xfdec0000-0xfdedffff,0xfdea0000-0xfdebffff irq 17 at device 7.0 on pci3 em0: Ethernet address: 00:07:e9:09:dc:4e pcm0: <nVidia nForce 410 MCP> port 0xdc00-0xdcff,0xd800-0xd8ff mem 0xfe02c000-0xfe02cfff irq 20 at device 16.2 on pci0 pcm0: <Avance Logic ALC655 AC97 Codec> nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0xd400-0xd407 mem 0xfe02b000-0xfe02bfff irq 21 at device 20.0 on pci0 nve0: Ethernet address 00:16:ec:a0:90:1a miibus0: <MII bus> on nve0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nve0: Ethernet address: 00:16:ec:a0:90:1a acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff,0xd4000-0xd57ff,0xd6000-0xd77ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2009274458 Hz quality 800 Timecounters tick every 1.000 msec acd0: DMA limited to UDMA33, device found non-ATA66 cable acd0: DVDR <TEAC DV-W516GD/P4S1> at ata0-master UDMA33 ad4: 190782MB <WDC WD2000JS-22MHB0 02.01C03> at ata2-master SATA300 ad6: 114473MB <Seagate ST3120813AS 3.AAH> at ata3-master SATA150 Trying to mount root from ufs:/dev/ad4s1a ----- WBR -- Boris Samorodov (bsam) Research Engineer, http://www.ipt.ru Telephone & Internet SP FreeBSD committer, http://www.FreeBSD.org The Power To Serve
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?24314292>