Date: Mon, 4 Feb 2013 14:24:52 -0430 From: Alberto Mijares <amijaresp@gmail.com> To: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Booting issue with 9.1-RELEASE and net4801 Message-ID: <CAGZBXN8QH_Q6HykkXJTixE37mrdbn8eZoWyyJ08679rihUBRhw@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi list, I'm finally playing with my net4801 and nanobsd. SanDisk CF is recognized. At my first try I had to disable DMA in ATA because it hanged out. Now it hangs when trying to mount root filesystem and mountroot> prompt appears. However, if a stop in loader prompt and type ls, files and dirs are displayed on disk0s1a. Any suggestion? Verbose boot log next: OK boot -v log SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=02 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=01 base=0000000000100000 len=0000000007f00000 SMAP type=02 base=00000000fff00000 len=0000000000100000 Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-RELEASE #0: Mon Feb 4 12:44:44 VET 2013 root@nano:/usr/obj/nanobsd.atm1c/usr/src/sys/GENERIC i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc13d5000. Calibrating TSC clock ... TSC clock: 266647858 Hz CPU: Geode(TM) Integrated Processor by National Semi (586-class CPU) Origin = "Geode by NSC" Id = 0x540 Family = 5 Model = 4 Stepping = 0 Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX> real memory = 134217728 (128 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x0000000007d6dfff, 110395392 bytes (26952 pages) avail memory = 112066560 (106 MB) INTR: Adding local APIC 0 as a target bios32: Found BIOS32 Service Directory header at 0xc00f7800 bios32: Entry = 0xf7840 (c00f7840) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x7861 Other BIOS signatures found: ULE: setup cpu 0 wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 fe5 kbd: new array size 4 kbd1 at kbdmux0 nfslock: pseudo-device mem: <memory> module_register_init: MOD_LOAD (vesa, 0xc0dc3570, 0) error 19 io: <I/O> null: <null device, zero device> random: <entropy source, Software, Yarrow> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ctl: CAM Target Layer loaded ACPI Error: A valid RSDP was not found (20110527/tbxfroot-237) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00011078) pcibios: BIOS version 2.01 pcib0 pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1078, dev=0x0001, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x100b, dev=0x0020, revid=0x00 domain=0, bus=0, slot=6, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x3f (1890 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xe100, size 8, enabled map[14]: type Memory, range 32, base 0xa0000000, size 12, enabled found-> vendor=0x100b, dev=0x0020, revid=0x00 domain=0, bus=0, slot=7, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x3f (1890 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xe200, size 8, enabled map[14]: type Memory, range 32, base 0xa0001000, size 12, enabled found-> vendor=0x100b, dev=0x0020, revid=0x00 domain=0, bus=0, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x3f (1890 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xe300, size 8, enabled map[14]: type Memory, range 32, base 0xa0002000, size 12, enabled found-> vendor=0x100b, dev=0x0510, revid=0x00 domain=0, bus=0, slot=18, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x001f, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x3f (1890 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type I/O Port, range 32, base 0x6100, size 6, enabled map[14]: type I/O Port, range 32, base 0x6200, size 6, enabled found-> vendor=0x100b, dev=0x0511, revid=0x00 domain=0, bus=0, slot=18, func=1 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type I/O Port, range 32, base 0x6300, size 8, enabled found-> vendor=0x100b, dev=0x0502, revid=0x01 domain=0, bus=0, slot=18, func=2 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled found-> vendor=0x100b, dev=0x0515, revid=0x00 domain=0, bus=0, slot=18, func=5 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type I/O Port, range 32, base 0x6500, size 6, enabled found-> vendor=0x0e11, dev=0xa0f8, revid=0x08 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x38 (1680 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=11 map[10]: type Memory, range 32, base 0xa0003000, size 12, enabled sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0000000-0xa0000 sis0: Silicon Revision: DP83816A miibus0: <MII bus> on sis0 nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0 nsphyter0: OUI 0x1000e8, model 0x0002, rev. 1 nsphyter0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached sis0: Ethernet address: 00:00:24:c1:36:c4 sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0001000-0xa0000 sis1: Silicon Revision: DP83816A miibus1: <MII bus> on sis1 nsphyter1: <DP83815 10/100 media interface> PHY 0 on miibus1 nsphyter1: OUI 0x1000e8, model 0x0002, rev. 1 nsphyter1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis1: bpf attached sis1: Ethernet address: 00:00:24:c1:36:c5 sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0002000-0xa0000 sis2: Silicon Revision: DP83816A miibus2: <MII bus> on sis2 nsphyter2: <DP83815 10/100 media interface> PHY 0 on miibus2 nsphyter2: OUI 0x1000e8, model 0x0002, rev. 1 nsphyter2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis2: bpf attached sis2: Ethernet address: 00:00:24:c1:36:c6 isab0: <PCI-ISA bridge> port 0x6100-0x613f,0x6200-0x623f at device 18.0 on pci0 isa0: <ISA bus> on isab0 pci0: <bridge> at device 18.1 (no driver attached) atapci0: <National Geode SC1100 ATA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-00 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 pci0: <bridge> at device 18.5 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xa0003000-0xa0003fff irq 11 at devic0 ohci0: (New OHCI DeviceId=0xa0f80e11) usbus0 on ohci0 usbus0: bpf attached ohci0: usbpf: Attached cpu0 on motherboard ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff pnpid ORM0000 on isa0 sc0: no video adapter found. sc0 failed to probe on isa0 vga0 failed to probe on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.50) Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> at port 0x40 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port not found. ppc0 failed to probe at irq 7 on isa0 uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: fast interrupt uart0: console (9600,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 uart1: fast interrupt wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices cfcs_init: ctl_frontend_register() failed with error 12! Device configuration finished. procfs registered Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. usbus0: 12Mbps Full Speed USB v1.0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ugen0.1: <0x0e11> at usbus0 uhub0: <0x0e11 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff pass0 at ata0 bus 0 scbus0 target 0 lun 0 pass0: <SanDisk SDCFH-004G HDX 6.03> CFA-0 device pass0: Serial Number BOZ111711234413 pass0: 16.700MB/s transfers (PIO4, PIO 512bytes) ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <SanDisk SDCFH-004G HDX 6.03> CFA-0 device ada0: Serial Number BOZ111711234413 ada0: 16.700MB/s transfers (PIO4, PIO 512bytes) ada0: 3815MB (7813120 512 byte sectors: 16H 63S/T 7751C) ada0: Previously was known as ad0 GEOM: new disk ada0 GEOM_PART: partition 2 has end offset beyond last LBA: 7999487 > 7813119 GEOM_PART: partition 3 has start offset beyond last LBA: 7999488 > 7813119 GEOM_PART: partition 3 has end offset beyond last LBA: 8002511 > 7813119 GEOM_PART: integrity check failed (ada0, MBR) uhub0: 3 ports with 3 removable, self powered Trying to mount root from ufs:/dev/ada0s1a [ro]... mountroot: waiting for device /dev/ada0s1a ... Mounting from ufs:/dev/ada0s1a failed with error 19. Loader variables: vfs.root.mountfrom=ufs:/dev/ada0s1a vfs.root.mountfrom.options=ro Manual root filesystem specification: <fstype>:<device> [options] Mount <device> using filesystem <fstype> and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:tank cd9660:/dev/acd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) <empty line> Abort manual input mountroot> Regards Alberto Mijares
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGZBXN8QH_Q6HykkXJTixE37mrdbn8eZoWyyJ08679rihUBRhw>