From owner-freebsd-questions  Fri Jun 12 14:22:57 1998
Return-Path: <owner-freebsd-questions@FreeBSD.ORG>
Received: (from majordom@localhost)
          by hub.freebsd.org (8.8.8/8.8.8) id OAA17703
          for freebsd-questions-outgoing; Fri, 12 Jun 1998 14:22:57 -0700 (PDT)
          (envelope-from owner-freebsd-questions@FreeBSD.ORG)
Received: from whqvax.picker.com (whqvax.picker.com [144.54.1.1])
          by hub.freebsd.org (8.8.8/8.8.8) with SMTP id OAA17374
          for <freebsd-questions@FreeBSD.ORG>; Fri, 12 Jun 1998 14:21:17 -0700 (PDT)
          (envelope-from rhh@ct.picker.com)
Received: from ct.picker.com by whqvax.picker.com with SMTP;
          Fri, 12 Jun 1998 17:20:35 -0400 (EDT)
Received: from elmer.ct.picker.com by ct.picker.com (4.1/SMI-4.1)
	id AA22709; Fri, 12 Jun 98 17:20:33 EDT
Received: by elmer.ct.picker.com (SMI-8.6/SMI-SVR4)
	id RAA29217; Fri, 12 Jun 1998 17:20:25 -0400
Message-Id: <19980612172024.A29182@ct.picker.com>
Date: Fri, 12 Jun 1998 17:20:24 -0400
From: Randall Hopper <rhh@ct.picker.com>
To: notme@lvdi.net
Cc: "freebsd-questions@FreeBSD.ORG" <freebsd-questions@FreeBSD.ORG>
Subject: Re: IDE Controller
Mail-Followup-To: notme@lvdi.net,
	"freebsd-questions@FreeBSD.ORG" <freebsd-questions@FreeBSD.ORG>
References: <Pine.BSF.3.95.980606100910.22014B-100000@current1.whistle.com> <357A2EE0.6A7E0B0E@lvdi.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 0.91.1i
In-Reply-To: <357A2EE0.6A7E0B0E@lvdi.net>; from notme on Sat, Jun 06, 1998 at 11:10:40PM -0700
Sender: owner-freebsd-questions@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.ORG

     From the IRQ/port number you list, sounds like you're trying to
configure your secondary IDE controller (wdc1).  I'm assuming your first
IDE controller (wdc0) detected correctly.

     The standard IRQ and port assignments for the first two IDE
controllers are:

         wdc0 = 1st IDE ctlr ==> IRQ 14, port base 1F0
         wdc1 = 2nd IDE ctlr ==> IRQ 15, port base 170

Make sure your settings are set to that, then boot and look at the output
from running:

     dmesg | grep wd

Hopefully things will probe OK.  If not, post the output and we'll go from
there.
 
Randall

notme <notme@lvdi.net>:
 |Well... I tried using wdc0, but when I use IRQ 14 and 0x170 with wdc0
 |(the second IDE Controler's IRQ and port), but it doesn't feel like to
 |detected it. Also, since I have an IDE harddrive, I had to set the
 |secondarey IDE controller as IRQ14 and port 0x1f0.  Free BSD detected the
 |secondary IDE controller, but not the first one.  Is there something that
 |I missed?
 |
 |Thank You in advance.
 |
 |
 |Julian Elischer wrote:
 |> well for start try using wdc0 that's the first IDE controller
 |>
 |> On Sat, 6 Jun 1998, notme wrote:
 |> >     I have try booting and type "-cv", but after I messed with the
 |> > config, FreeBSD still says "wcd1 not found at <port>" Is there any
 |> > other way of fixing this problem?
 |> >
 |> > Julian Elischer wrote:
 |> > > if you type '-cv' when faced with the boot prompt, you will be
 |> > > given a confiuration editor.
 |> > >
 |> > > check the interrupt and port for wdc0
 |> > >
 |> > > you will find that it is IRQ14 and 0x1F0
 |> > > which is the standard settings for the IDE cntroller
 |> > > your settings  IRQ15 and 0x170 are the settings for the SECOND IDE
 |> > > controller. You should either edit the config or set up the card
 |> > > differently.
 |> > >
 |> > > On Fri, 5 Jun 1998, notme wrote:
 |> > > >     My Free BSD is not detecting my IDE Controller.  It is set to
 |> > > >IRQ 15, 0X170, but the FBSD doesn't detect it.  It works fine in
 |> > > >Windows 95 though.  Please help!

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message