Date: Thu, 7 Nov 2013 15:32:43 +0700 From: Olivier Nicole <olivier.nicole@cs.ait.ac.th> To: =?TIS-620?B?udLCwaekxcfUqq0g4LzXzaGi0g==?= =?TIS-620?B?xyAowNHKKQ==?= <mongkonwit_phu@winner.co.th> Cc: "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org> Subject: Re: i have some problem Message-ID: <CA%2Bg%2BBvhvNFwTbujSvEj=f71%2BbcL0=-rK7f6gAy=Q7A5KqnBURQ@mail.gmail.com> In-Reply-To: <20131107072833.d3a0d2ef@mail.winner.co.th> References: <20131107072833.d3a0d2ef@mail.winner.co.th>
next in thread | previous in thread | raw e-mail | index | archive | help
Pat, > we use smartctl -a /dev/da0 > but can not check HDD so i would like to know about problem. I think the reason is because smartctl is used to control a physical hard disk. But you have a hardware RAID, so /dev/da0 is not a physical hard disk, it is a RAID disk. RAID card does not support SMART. Best regards, Olivier > > Detail of smartctl 6.0 > > smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-RELEASE amd64] (local build) > Copyright (coffee) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org > > Vendor: LSI > Product: Logical Volume > Revision: 3000 > User Capacity: 291,999,055,872 bytes [291 GB] > Logical block size: 512 bytes > Logical Unit id: 0x600508e000000000848d5098fa521d01 > Device type: disk > Local Time is: Thu Nov 7 14:11:55 2013 ICT > Device does not support SMART > > Error Counter logging not supported > Device does not support Self Test logging > > we use raid card is pile 2008 setup raid 10 > > it is detail raid card http://www.asus.com/Commercial_Servers_Workstations/PIKE_2008/ > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2Bg%2BBvhvNFwTbujSvEj=f71%2BbcL0=-rK7f6gAy=Q7A5KqnBURQ>