Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 9 Jan 2004 14:45:52 +0100 (CET)
From:      thelen@ccgis.de
To:        "Subhro" <subhro@fusemail.com>
Cc:        questions@freebsd.org
Subject:   RE: swap_pager: out of swap space --> doxygen installation fails
Message-ID:  <4721.192.168.2.109.1073655952.squirrel@vogon.ccgis.de>
In-Reply-To: <1421.192.168.2.128.1073573242.squirrel@vogon.ccgis.de>
References:  <3279.192.168.2.109.1073486842.squirrel@vogon.ccgis.de>     <200401071525.UAA01494@manage.24online> <1421.192.168.2.128.1073573242.squirrel@vogon.ccgis.de>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello Subhro,

allright, please forget my single user mode questions! I should have done,
what I've read:
mount /dev/ad0s1a / and mount /dev/ad0s1g /usr, turns ad0s1a to read/write
and allows access to /usr, so then everything is fine.

Sorry for my impatience. And thanks again for your help.

Benjamin



> Hello Subhro,
>
> thank you very much for your advices! I tried, what you've told me, but I
> failed right at the beginning. May be you could comment some of my
> problems/questions, that would surely help me for the next time.
>
>
>> Hi Benjamin,
>> I suspect that you have assigned too little swap space. As depicted in
> the
>> handbook, "The swap space should be *at least* 2 times the physical
> memory
>> present in the system. You should assign more swap space if the amount
> of
>> RAM is small"...which is your case. I think you should be assigning at
> least
>> 256M of swap space.
>
>
> I just thought the disklabel default value would be fine and as I
> previously wrote, I think, I did the same on the old 4.7-system.
> It is strange, that I have 64meg of RAM, but 112meg instead of 128meg were
> assigned as a default by disklabel for swap!?
>
> Nevertheless I tried to increase swap-space, but I did my next mistake,
> because I forgot to umount /data (ad0s1h) before deleting via fdisk. fdisk
> complained, did something, but I don't know what.
>
> Then, the the machine stopped booting with the following error-message:
>
> --------------------------------------------------------------------------
> /dev/ad0s1h: CANNOT READ: BLK 12759072
> /dev/ad0s1h: UNEXPECTED INCONSISTENCY; RUN FSCK MANUALLY.
>
> THE FOLLOWING FILE SYSTEM HAD AN UNEXPETED INCONSISTENCY:
> /dev/ad0s1h (/data)
>
> Automatic file system check failed...help!
> Enter full pathname of shell or RETURN for /bin/sh:
> --------------------------------------------------------------------------
>
> Usually I know this error, if an entry in /etc/fstab is wrong. In this
> case, I suppose, this partition wasn't formatted correctly!?
>
>
> I pressed RETURN and found the shell. I could mount filesystems, great,
> but I could not delete the /data entry in /etc/fstab, because / partition
> was mounted read-only.
>
> After that I tried single-user mode and Fix-it disk, but in both cases, I
> even didn't have the most basic commands available:
>
> mount
> cd
> ls
> vi
>
> I could do nothing. I suppose that the reason was, that I should have
> supplied the full path to the command, because no PATH-environment is set
> in case of using singel user mode or fixit.
> Well, this idea came to late and I gave up and started a new FreeBSD 4.9
> installation, with, I hope enough swap space!
>
>
>
>
>> , but stops
>
>
>> And regarding the port tree, you have damaged your
>> port
>> tree. I would recommend first CVSup the main source tree (however it is
>> not
>> necessary, but its nice to stay updated)
>
> As this is such a slow machine, I would prefer not do to this at them
> moment. Later I'll do.
>
>
>>. Then delete the entire ports
>> tree,
>>
>> rm -rf /usr/ports/*
>>
>> And then pull down the ports tree off the cvsup server. By the way, do
>> copy
>
> Will cvsup <portsupfile> do, even the ports tree is completely empty!? If
> so, that's cool and easy. Isn't there somewhere the port-db, which also
> have to be made new? I thought the db is located in /var/db/pkg.
>
>
>
>> /usr/ports/distfiles to some other place before running the rm command.
>>That
>> will save you quite some time.
>
> Good idea.
>
>> You should be back in business then. Let us
>> know if that worked out
>
>
> Thanks again for your help. It would be really nice, to have some little
> comments on my mistakes!
>
>
> Regards,
> Benjamin
>
>>
>> Regards
>> Subhro
>>
>> Subhro Sankha Kar
>> Indian Institute of Information Technology
>> Block AQ-13/1, Sector V
>> Salt Lake City
>> PIN 700091
>> India
>>
>> -----Original Message-----
>> From: owner-freebsd-questions@freebsd.org
>> [mailto:owner-freebsd-questions@freebsd.org] On Behalf Of
> thelen@ccgis.de
>> Sent: Wednesday, January 07, 2004 8:17 PM
>> To: questions@freebsd.org
>> Subject: swap_pager: out of swap space --> doxygen installation fails
>>
>> Hi list,
>>
>> I suppose, that the repeated messages on ttyv0 "swap_pager_getswapspace:
> failed", "swap_pager: out of swap space", "/kernel: pid  7184 (cc1plus),
> uid 0, was killed: out of swap space" and the error code of the failed
> compilation of doxygen ""c++: Internal compiler error: program cc1plus
> got
>> fatal signal 9" exactly mean, what they say. :-)
>>
>> In fact, it really is a little FreeBSD 4.8 box with P1-133, 64 meg RAM
> and
>> 112 meg swap space. Not the racing machine, I know. But I had FreeBSD
> 4.7
>> before that 4.8-system on the same machine and never had this error,
> even
>> regarding the same port (gdal-1.1.8). This port installs a lot of
> dependencies, one is doxygen.
>>
>>
>> -------------------------------------------------------------------------
>>
>> gmake -f Makefile.libdoxycfg PERL=/usr/bin/perl all
>> gmake[2]: Entering directory
>> `/usr/ports/devel/doxygen/work/doxygen-1.3.3/src'
>> flex -PconfigYY -t config.l >config.cpp
>> c++ -c -O -pipe -D_THREAD_SAFE -Wall -W -I../qtools -o
> ../objects/config.o
>> confi
>> g.cpp
>> c++: Internal compiler error: program cc1plus got fatal signal 9
> gmake[2]: *** [../objects/config.o] Error 1
>> {standard input}: Assembler messages:
>> {standard input}:14050: Warning: end of file not at end of a line;
> newline
>> inser
>> ted
>> gmake[2]: Leaving directory
>> `/usr/ports/devel/doxygen/work/doxygen-1.3.3/src'
>> gmake[1]: *** [all] Error 2
>> gmake[1]: Leaving directory
>> `/usr/ports/devel/doxygen/work/doxygen-1.3.3/src'
>> gmake: *** [all] Error 2
>> *** Error code 2
>>
>> Stop in /usr/ports/devel/doxygen
>> -------------------------------------------------------------------------
>>
>>
>>
>>
>>
>> I then tried to install doxygen as package via sysinstall. That failed,
> too and sysinstall tried to install an older version of doxygen (1.2.x)
> than the port tree offers (1.3.3). See the follwing error message:
>>
>> "Add of package freetype2-2.1.3_1 aborted, error code 1 Please check the
> debug screen for more info."
>>
>>
>> freetype2 ist alread installed, but version 2.1.5_1!?
>>
>>
>> So, as it is three month ago, I installed that box and never did a cvsup
> again (or something else), I decided to update the ports tree. Even that
> failed, too:
>>
>> Checkout port/www/p5-libapreq/pkg-descr
>> Updater failed: Cannot install
>> "/usr/ports/www/p5-libapreq/#cvs.cvxup-7326.13959" to
>> "/usr/ports/www/p5-libapreq/pkg-descr": Is a directory
>>
>> Well, I also made "make index", but of course there are a lot of
> messages
>> that the "dependency list (is) incomplete". I shouldn't have done that,
> should I?
>>
>>
>> That is where I am now. Can somebody give me some advice?!
>>
>> Is it really to less swap space? I really never had that before on that
> machine. How do I get doxygen installed? Is my port tree now broken? How
> can I fix this?
>>
>>
>> Thanks in advance and sorry for the chaos,
>> Benjamin
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to
>> "freebsd-questions-unsubscribe@freebsd.org"
>>
>>
>>
>>
>>
>>
>
>
>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe@freebsd.org"
>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4721.192.168.2.109.1073655952.squirrel>