Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 28 Oct 2011 15:22:17 +1100 (EST)
From:      Ian Smith <smithi@nimnet.asn.au>
To:        Warner Losh <imp@bsdimp.com>
Cc:        mobile@freebsd.org
Subject:   Re: Billionton Cardbus to USB 2.0 PC Card adapter
Message-ID:  <20111028151655.E71254@sola.nimnet.asn.au>
In-Reply-To: <D6E2ACE3-002F-4FE0-8D42-DD78CBBDB3A5@bsdimp.com>
References:  <20111028005925.A98377@sola.nimnet.asn.au> <D6E2ACE3-002F-4FE0-8D42-DD78CBBDB3A5@bsdimp.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 27 Oct 2011, Warner Losh wrote:
 > Power to the USB device?  CardBus cards don't get much power from the 
 > system, and often are underprovisioned to give power to the devices.  
 > Many of the require additional external adapters to power just about 
 > anything.  Try a self-powered device instead.  I've had several 
 > experiences where I had non-working devices that worked when I 
 > plugged in an external adapter.
 > 
 > Warner

Thanks Warner.  I'm off for a couple of days but will try it through a 
powered hub when I get back.  Funny, it has a small socket between the 
ports on the card for a 2.5mm? plug saying 5V (with usual polarity) and 
I assumed that was a 5V power output - but maybe it's asking for 5V 
input?  No plug or cord with it, so I'll hunt one up and test it.

Getting hard to find good Cardbus gear these days ..

cheers, Ian

 > On Oct 27, 2011, at 9:17 PM, Ian Smith wrote:
 > 
 > > Finding no clues to something known to work on FreeBSD, I'm trying 
 > > $subject card, wanting to add 2 x USB 2.0 ports to my Thinkpad T23 
 > > running 8.2-RELEASE, and soon 9.0-RC1
 > > 
 > > The T23 has 2 x USB 1.0 UHCI ports.  They work fine but 12 minutes to 
 > > write an 9.0-RC1 image is not much fun, forget external USB HDs etc.
 > > 
 > > Plugging in the card looks promising enough:
 > > 
 > > Oct 27 18:28:54 t23 kernel: ohci0: <NEC uPD 9210 USB controller> mem 0x88000000-0x88000fff irq 11 at device 0.0 on cardbus0
 > > Oct 27 18:28:54 t23 kernel: ohci0: [ITHREAD]
 > > Oct 27 18:28:54 t23 kernel: usbus3: <NEC uPD 9210 USB controller> on ohci0
 > > Oct 27 18:28:54 t23 kernel: usbus3: 12Mbps Full Speed USB v1.0
 > > Oct 27 18:28:54 t23 kernel: ohci1: <NEC uPD 9210 USB controller> mem 0x88001000-0x88001fff irq 11 at device 0.1 on cardbus0
 > > Oct 27 18:28:54 t23 kernel: ohci1: [ITHREAD]
 > > Oct 27 18:28:54 t23 kernel: ugen3.1: <NEC> at usbus3
 > > Oct 27 18:28:54 t23 kernel: uhub3: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
 > > Oct 27 18:28:54 t23 kernel: usbus4: <NEC uPD 9210 USB controller> on ohci1
 > > Oct 27 18:28:54 t23 kernel: usbus4: 12Mbps Full Speed USB v1.0
 > > Oct 27 18:28:54 t23 kernel: ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x88002000-0x880020ff irq 11 at device 0.2 on cardbus0
 > > Oct 27 18:28:54 t23 kernel: ehci0: [ITHREAD]
 > > Oct 27 18:28:54 t23 kernel: usbus5: EHCI version 0.95
 > > Oct 27 18:28:54 t23 kernel: ugen4.1: <NEC> at usbus4
 > > Oct 27 18:28:54 t23 kernel: uhub4: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 > > Oct 27 18:28:54 t23 kernel: usbus5: <NEC uPD 720100 USB 2.0 controller> on ehci0
 > > Oct 27 18:28:54 t23 kernel: usbus5: 480Mbps High Speed USB v2.0
 > > Oct 27 18:28:54 t23 kernel: ugen5.1: <NEC> at usbus5
 > > Oct 27 18:28:54 t23 kernel: uhub5: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
 > > Oct 27 18:28:56 t23 kernel: uhub4: 2 ports with 2 removable, self powered
 > > Oct 27 18:28:56 t23 kernel: uhub3: 3 ports with 3 removable, self powered
 > > Oct 27 18:28:57 t23 kernel: uhub5: 5 ports with 5 removable, self powered
 > > 
 > > But plugging in either of my (working on the UHCI USB1 ports) USB memory 
 > > sticks fails, and in quite inconsistent ways on subsequent insertion and 
 > > removal.  More successful, in that /dev/da0 appears but is inaccessible:
 > > 
 > > Oct 28 01:26:52 t23 root: Unknown USB device: vendor 0x0951 product 0x1624 bus uhub5
 > > Oct 28 01:26:52 t23 kernel: ugen5.2: <Kingston> at usbus5
 > > Oct 28 01:26:52 t23 kernel: umass0: <Kingston DataTraveler G2, class 0/0, rev 2.00/1.00, addr 2> on usbus5
 > > Oct 28 01:26:52 t23 kernel: umass0:  SCSI over Bulk-Only; quirks = 0x0000
 > > Oct 28 01:26:53 t23 kernel: umass0:2:0:-1: Attached to scbus2
 > > Oct 28 01:26:55 t23 kernel: (probe0:umass-sim0:0:0:0): AutoSense failed
 > > Oct 28 01:26:55 t23 kernel: da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
 > > Oct 28 01:26:55 t23 kernel: da0: <Kingston DataTraveler G2 PMAP> Removable Direct Access SCSI-0 device
 > > Oct 28 01:26:55 t23 kernel: da0: 40.000MB/s transfers
 > > Oct 28 01:26:55 t23 kernel: da0: 7640MB (15646720 512 byte sectors: 255H 63S/T 973C)
 > > Oct 28 01:27:00 t23 kernel: (da0:umass-sim0:0:0:0): AutoSense failed
 > > Oct 28 01:27:32 t23 last message repeated 3 times
 > > Oct 28 01:29:36 t23 last message repeated 12 times
 > > Oct 28 01:33:12 t23 last message repeated 4 times
 > > 
 > > .. during which time I was trying things like below, before even trying 
 > > to mount it.  Throughout that time the LED on the stick flashes about 4 
 > > times per second, steady, like it's repeatedly trying to connect.
 > > 
 > > smithi on t23% ll /dev/da*
 > > crw-r-----  1 root  operator    0, 157 Oct 28 01:26 /dev/da0
 > > smithi on t23% id -p
 > > uid     smithi
 > > groups  smithi wheel operator staff dialer network vboxusers
 > > smithi on t23% dd if=/dev/da0 count=1 | hd
 > > dd: /dev/da0: Input/output error
 > > 0+0 records in
 > > 0+0 records out
 > > 0 bytes transferred in 0.193469 secs (0 bytes/sec)
 > > smithi on t23% ll /dev/da*
 > > crw-r-----  1 root  operator    0, 157 Oct 28 01:26 /dev/da0
 > > smithi on t23% fdisk /dev/da0
 > > fdisk: unable to get correct path for /dev/da0: Input/output error
 > > smithi on t23% date
 > > Fri Oct 28 01:37:21 EST 2011
 > > smithi on t23% ll /dev/da*
 > > crw-r-----  1 root  operator    0, 157 Oct 28 01:26 /dev/da0
 > > 
 > > I've done all that as root other times, it's not a permissions thing.  
 > > Here it seems to disconnect cleanly on removal, not so at other times:
 > > 
 > > Oct 28 01:40:36 t23 kernel: ugen5.2: <Kingston> at usbus5 (disconnected)
 > > Oct 28 01:40:36 t23 kernel: umass0: at uhub5, port 2, addr 2 (disconnected)
 > > Oct 28 01:40:36 t23 kernel: (da0:umass-sim0:0:0:0): lost device
 > > Oct 28 01:40:36 t23 kernel: (da0:umass-sim0:0:0:0): removing device entry
 > > 
 > > Another less successful attempt, with juicy error messages.  To an old 
 > > systems hacker such inconsistency smells of timing issues, but my sense 
 > > of smell isn't what it used to be :)
 > > 
 > > Oct 27 18:32:57 t23 root: Unknown USB device: vendor 0x090c product 0x1000 bus uhub5
 > > Oct 27 18:32:57 t23 kernel: ugen5.2: <USB 2.0> at usbus5
 > > Oct 27 18:32:57 t23 kernel: umass0: <USB 2.0 product 0x1000, class 0/0, rev 2.00/11.00, addr 2> on usbus5
 > > Oct 27 18:32:57 t23 kernel: umass0:  SCSI over Bulk-Only; quirks = 0x0000
 > > Oct 27 18:32:58 t23 kernel: umass0:2:0:-1: Attached to scbus2
 > > Oct 27 18:32:58 t23 kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
 > > Oct 27 18:32:58 t23 kernel: (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
 > > Oct 27 18:32:58 t23 kernel: (probe0:umass-sim0:0:0:0): SCSI status: Check Condition
 > > Oct 27 18:32:58 t23 kernel: (probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed)
 > > Oct 27 18:32:58 t23 kernel: da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
 > > Oct 27 18:32:58 t23 kernel: da0: <USB 2.0 Flash Disk 1100> Removable Direct Access SCSI-0 device
 > > Oct 27 18:32:58 t23 kernel: da0: 40.000MB/s transfers
 > > Oct 27 18:32:58 t23 kernel: da0: 967MB (1981440 512 byte sectors: 64H 32S/T 967C)
 > > Oct 27 18:33:07 t23 kernel: ugen5.2: <USB 2.0> at usbus5 (disconnected)
 > > Oct 27 18:33:07 t23 kernel: umass0: at uhub5, port 1, addr 2 (disconnected)
 > > Oct 27 18:33:07 t23 kernel: (da0:umass-sim0:0:0:0): AutoSense failed
 > > Oct 27 18:33:07 t23 kernel: (da0:umass-sim0:0:0:0): lost device
 > > Oct 27 18:33:07 t23 kernel: (da0:umass-sim0:0:0:0): Invalidating pack
 > > Oct 27 18:33:07 t23 kernel: (da0:umass-sim0:0:0:0): removing device entry
 > > 
 > > The apparent connection and then soon disconnection occurs without any 
 > > attempts at access by me.  This 1GB Shintaro stick also works on the 
 > > UHCI ports, and I'd expect the Kingston stick to be reasonable quality.
 > > 
 > > Inserting the card with a USB stick already in place fared no better.
 > > 
 > > Any advice on things to try welcome.
 > > 
 > > cheers, Ian



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20111028151655.E71254>