Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 21 May 2013 07:23:20 +0000
From:      Ivailo Tanusheff <>
To:        Pol Hallen <>, FreeBSD Questions <>
Subject:   RE: route problem
Message-ID:  <>
In-Reply-To: <>
References:  <>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help

Hope you have rebooted after enabling the gateway, but you can check this w=
ith " sysctl net.inet.ip.forwarding " :)

So far from the server side it looks OK for me, but what are you pinging ac=
How is done the configuration of the target device?
This sounds like a pure routing problem, as you do not use NAT, then the de=
vices in the should know where to find your server.
The basic ideas are:
1. Make  default gateway for the devices in or
2.  route add -net 192.168.2 gw (syntax depends on the OS)

Also check if the device you ping accepts pings - many devices denies this =
by default, also Windows 7/2008 and later has firewall enabled which do not=
 permits pings.

Best regards,
Ivailo Tanusheff

-----Original Message-----
From: [mailto:owner-freebsd-questions@f=] On Behalf Of Pol Hallen
Sent: Monday, May 20, 2013 10:59 PM
To: FreeBSD Questions
Subject: route problem

Hi folks! On my lan I've:


re0 -
xl0 -

default        UGS         0      189    re0          link#8             UH          0       18    lo0     link#1             U           0     6145    re0      link#1             UHS         0        0    lo0     link#7             U           0     2282    xl0      link#7             UHS         0        0    lo0

and gateway_enable=3D"YES"

from server1 I can ping whole lan:,

from server2

re0 -

Destination        Gateway            Flags    Refs      Use  Netif Expire
default        UGS         0     8450   fxp0          link#8             UH          0        0    lo0       link#6             UHS         0        0    lo0

I can ping and ONLY

I need ping lan but I can only see

any idea?


_______________________________________________ mailing list
To unsubscribe, send any mail to "

Want to link to this message? Use this URL: <>