Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 11 Jan 2005 12:59:50 +1030
From:      "Wilkinson, Alex" <alex.wilkinson@dsto.defence.gov.au>
To:        freebsd-current@freebsd.org, usb@freebsd.org
Subject:   Re: [USB] JetFlash TS1GJF2B 2.00 Attempt to query device sizefailed: UNIT ATTENTION
Message-ID:  <20050111022946.GA33309@squash.dsto.defence.gov.au>
In-Reply-To: <41DE4E52.2040301@elischer.org>
References:  <20050107064748.GE18554@squash.dsto.defence.gov.au>  <41DE4E52.2040301@elischer.org>

next in thread | previous in thread | raw e-mail | index | archive | help
    0n Fri, Jan 07, 2005 at 12:54:42AM -0800, Julian Elischer wrote: 

    >Wilkinson, Alex wrote:
    >>No response from usb@ so hopefully someone (julian) will respond here
    >>;)
    >
    >well you posted there at 8:49 and here at 10:47
    >
    >I guess I didn't happen to read the usb list in that 1 hour and 58 minutes.
    >
    >we may need to make it use  a quirk to use a different read capacity command
    >or skip it..
    >
    >I'll have to look to remember what collection of 'quirks' we have in our 
    >collection.

Interestingly, if the thumb drive is plugged in whilst boot strapping
a get a panic:


   umass0: BBB reset failed, STALLED
   umass0: BBB bulk-in clear stall failed, STALLED
   umass0: at uhub1 port 1 (addr 2) disconnected
   Fatal trap 12: page fault while in kernel mode
   fault virtual address   = 0x1c
   fault code              = supervisor read, page not present
   instruction pointer     = 0x8:0xc04a5907
   stack pointer           = 0x10:0xe36f7ca4
   frame pointer           = 0x10:0xe36f7cb8
   code segment            = base 0x0, limit 0xfffff, type 0x1b
                           = DPL 0, pres 1, def32 1, gran 1
   processor eflags        = interrupt enabled, resume, IOPL = 0
   current process         = 29 (irq19: uhci1)
   [thread pid 29 tid 100000 ]
   Stopped at      uhci_softintr+0x23:     movl    0x1c(%eax),%eax
   db>
   db> tr
   Tracing pid 29 tid 100000 td 0xc2664000
   uhci_softintr(c275e000,0,c2766d00,4,c2661400) at uhci_softintr+0x23
   uhci_intr1(c275e000,c2664000,0,0,0) at uhci_intr1+0xcd
   ithread_loop(c2661400,e36f7d48,0,0,0) at ithread_loop+0xb7
   fork_exit(c04e4c20,c2661400,e36f7d48) at fork_exit+0x64
   fork_trampoline() at fork_trampoline+0x8
   --- trap 0x1, eip = 0, esp = 0xe36f7d7c, ebp = 0 ---
   db>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050111022946.GA33309>