Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 28 Jun 2013 11:42:01 -0400
From:      John Baldwin <jhb@freebsd.org>
To:        "Mr. Clif" <clif@eugeneweb.com>
Cc:        pyunyh@gmail.com, freebsd-net@freebsd.org, yongari@freebsd.org
Subject:   Re: misc/179033: [dc] dc ethernet driver seems to have issues with some multiport card and mother board combinations
Message-ID:  <201306281142.01250.jhb@freebsd.org>
In-Reply-To: <51CA6FF9.60805@eugeneweb.com>
References:  <201305300113.r4U1DRGp089692@freefall.freebsd.org> <201306241738.47350.jhb@freebsd.org> <51CA6FF9.60805@eugeneweb.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday, June 26, 2013 12:37:13 am Mr. Clif wrote:
> Hi John,
> 
> Thanks for working on this. I'm very interested in getting this fixed 
> for everyone that uses the Affected Atom boards and other small format 
> boards that work well in small custom routers.
> 
> However right now I have a big network upgrade I'm working on and don't 
> have time to get to it until late July, I'm hoping. So please forgive me 
> for the long delay.

That is fine.  I've been able to test this on a little netbook I have that has
bridges with the ISA enable bit set and have fixed a few bugs.  The updated
patch is at the URL below.  I wasn't able to test your specific use case yet
however (of the BIOS using an invalid range).

>      Thanks for your help,
>      Clif
> 
> 
> John Baldwin wrote:
> > On Monday, June 10, 2013 3:13:11 pm Mr. Clif wrote:
> >> Hi John and Pyun,
> >>
> >> Ok got the new kernel installed and tested. Yes it works! :-) Maybe that
> >> will also fix a simular problem with the sun cards (cas[03]), except I
> >> don't see a define like that in if_cas.c. Suggestions?
> > So I have a possible "real" fix for this.  However, I do not have any hardware
> > I can find that has a PCI-PCI bridge with the ISA-enable bit set.  I know it
> > compiles and boots fine on other systems.  Can you please try this and capture
> > the dmesg output?  It would also be good to capture devinfo -u output before
> > and after.
> >
> > http://www.freebsd.org/~jhb/patches/pci_isa_enable.patch
> >
> 
> 

-- 
John Baldwin



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201306281142.01250.jhb>