From owner-freebsd-alpha Thu Mar 29 10:46:25 2001 Delivered-To: freebsd-alpha@freebsd.org Received: from wall.polstra.com (rtrwan160.accessone.com [206.213.115.74]) by hub.freebsd.org (Postfix) with ESMTP id 93A9A37B71F for ; Thu, 29 Mar 2001 10:46:20 -0800 (PST) (envelope-from jdp@polstra.com) Received: from vashon.polstra.com (vashon.polstra.com [206.213.73.13]) by wall.polstra.com (8.11.1/8.11.1) with ESMTP id f2TIkKV17025; Thu, 29 Mar 2001 10:46:20 -0800 (PST) (envelope-from jdp@polstra.com) Message-ID: X-Mailer: XFMail 1.3 [p0] on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Thu, 29 Mar 2001 10:46:19 -0800 (PST) Organization: Polstra & Co., Inc. From: John Polstra To: alpha@freebsd.org Subject: RC1 looks OK on AlphaPC 164LX Cc: Wilko Bulte Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Wilko asked me to try 4.3-RC1 on my AlphaPC 164LX. I don't have the bandwidth to try the ISO image, but I upgraded via make world. It all seems to work fine. I made boot floppies from the latest floppy images on ftp.freebsd.org. Note, these are not RC1 images -- they are BETAs from March 13. They booted fine and got me into what appeared to be a functional installer. If I knew how to make a bootable alpha CD, I'd try that. El Torito doesn't work. I know this machine can boot from CD, because that's how I installed Tru64 on the other hard drive. On startup, amd is causing one unaligned access message. That has been going on for quite a long time, and it doesn't appear to cause any problems. The dmesg output is appended to this mail. It is from my custom kernel, not from GENERIC. John Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RC #0: Wed Mar 28 16:28:44 PST 2001 jdp@alpha.polstra.com:/usr/src/sys/compile/ALPHA EB164 Digital AlphaPC 164LX 533 MHz, 531MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1 OSF PAL rev: 0x1000200020117 real memory = 132046848 (128952K bytes) avail memory = 123224064 (120336K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000676000. cia0: Pyxis, pass 1 cia0: extended capabilities: 1 pcib0: <2117x PCI host bus adapter> on cia0 pci0: on pcib0 dc0: port 0x1100-0x117f mem 0x82271100-0x8227117f irq 0 at device 6.0 on pci0 dc0: interrupting at CIA irq 0 dc0: Ethernet address: 08:00:2b:c5:3b:2d miibus0: on dc0 dcphy0: on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0x1000-0x10ff mem 0x82270000-0x82270fff,0x82271000-0x822710ff irq 1 at device 7.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: interrupting at CIA irq 1 isab0: at device 8.0 on pci0 isa0: on isab0 pci0: at 9.0 irq 3 pci0: at 11.0 irq 5 mcclock0: at port 0x70-0x71 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd0: interrupting at ISA irq 1 psm0: irq 12 on atkbdc0 psm0: interrupting at ISA irq 12 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o Timecounter "alpha" frequency 533177024 Hz IPsec: Initialized Security Association Processing. Waiting 2 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. Mounting root from ufs:/dev/da0f cd0 at sym0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present da1 at sym0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message