Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 09 Feb 2005 10:37:12 -0800
From:      "Mark A. Garcia" <mag@hamletinc.com>
To:        "Marc G. Fournier" <scrappy@hub.org>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: vinum in 4.x poor performer?
Message-ID:  <420A5858.6020602@hamletinc.com>
In-Reply-To: <20050209001254.G94338@ganymede.hub.org>
References:  <20050208231208.B94338@ganymede.hub.org> <20050208234602.M94338@ganymede.hub.org> <20050209001254.G94338@ganymede.hub.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Marc G. Fournier wrote:

>
> Self-followup .. the server config is as follows ... did I do maybe 
> mis-configure the array?
>
> # Vinum configuration of neptune.hub.org, saved at Wed Feb  9 00:13:52 
> 2005
> drive d0 device /dev/da1s1a
> drive d1 device /dev/da2s1a
> drive d2 device /dev/da3s1a
> drive d3 device /dev/da4s1a
> volume vm
> plex name vm.p0 org raid5 1024s vol vm sd name vm.p0.s0 drive d0 plex 
> vm.p0 len 142314496s driveoffset 265s plexoffset 0s
> sd name vm.p0.s1 drive d1 plex vm.p0 len 142314496s driveoffset 265s 
> plexoffset 1024s
> sd name vm.p0.s2 drive d2 plex vm.p0 len 142314496s driveoffset 265s 
> plexoffset 2048s
> sd name vm.p0.s3 drive d3 plex vm.p0 len 142314496s driveoffset 265s 
> plexoffset 3072s
>
> bassed on an initial config file that looks like:
>
> neptune# cat /root/raid5
> drive d0 device /dev/da1s1a
> drive d1 device /dev/da2s1a
> drive d2 device /dev/da3s1a
> drive d3 device /dev/da4s1a
> volume vm
>  plex org raid5 512k
>  sd length 0 drive d0
>  sd length 0 drive d1
>  sd length 0 drive d2
>  sd length 0 drive d3
>
It's worth pointing out that your performance on the raid-5 can change 
for the better if you avoid having the stripe size be a power of 2.  
This is especially true if the (n)umber of disks are a 2^n.

Cheers,
-.mag



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?420A5858.6020602>