Date: Tue, 16 Sep 1997 12:15:38 +0100 From: "John McLaughlin" <John.McLaughlin@Acucobol.IE> To: hardware@freebsd.org, scsi@freebsd.org Subject: Adaptec 1542CP on Compaq Prosignia VS problems Message-ID: <199709161115.MAA27536@guinness.acucobol.ie>
next in thread | raw e-mail | index | archive | help
Hi,
I'm running 2.2.2 on the above, which has started to
intermittently give the following errors:
aha0: Bus dropped at unexpected time
aha0: Invalid bus phase/sequence
sd0(aha0:0:0): UNIT ATTENTION asc:29,0
sd0(aha0:0:0): Power on, reset, or bus device reset occurred
, retries:4
aha0: Invalid bus phase/sequence
aha0: Invalid bus phase/sequence
sd0(aha0:0:0): timed out
sd0(aha0:0:0): UNIT ATTENTION asc:29,0
sd0(aha0:0:0): Power on, reset, or bus device reset occurred
, retries:2
aha0: Invalid bus phase/sequence
sd0(aha0:0:0): UNIT ATTENTION asc:29,0
sd0(aha0:0:0): Power on, reset, or bus device reset occurred
, retries:4
And the dmesg output is:
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.2-RELEASE #0: Wed Jul 23 11:40:00 IST 1997
root@holsten.acucobol.ie:/usr/src/sys/compile/HOLSTEN
CPU: i486 DX2 (486-class CPU)
Origin = "GenuineIntel" Id = 0x435 Stepping=5
Features=0x3<FPU,VME>
real memory = 16777216 (16384K bytes)
avail memory = 14864384 (14516K bytes)
eisa0: <CPQ701 (System Board)>
Probing for devices on the EISA bus
eisa0:8 <CPQ4410=0xe114410> unknown device
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 not found at 0x2f8
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x3bc-0x3c3 irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0 waiting for scsi devices to settle
(aha0:0:0): "COMPAQ M2694ES-512 952B" type 0 fixed SCSI 2
sd0(aha0:0:0): Direct-Access 1001MB (2051000 512 byte sectors)
(aha0:2:0): "TANDBERG TDC 3600 =08:" type 1 removable SCSI 2
st0(aha0:2:0): Sequential-Access density code 0x0, drive empty
(aha0:4:0): "ARCHIVE Python 27871-XXX 4.BG" type 1 removable SCSI 2
st1(aha0:4:0): Sequential-Access density code 0x13, drive empty
lnc0 at 0x8800-0x8817 irq 10 drq 0 on eisa slot 8
lnc0: PCnet-32 VL-Bus address 00:80:5f:18:d9:9c
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
It was working fine for about 6 weeks after the install,
before the started turning up regularly, so I'd guess it's either a
problem with the controller, or the disk. Is it possibly a problem
with the setup on the card, or possibly the fact that it's all sitting
inside a Compaq?
Any suggestions much appreciated.
Thanks,
John
----------------------------------------------------------------------
John McLaughlin | Acucobol Ireland Ltd.
IS Manager, Europe | South Co. Business Park
| Dublin 18, Ireland.
e-Mail: jmcl@Acucobol.IE | Phone: +353 1 294-0967
John.McLaughlin@Acucobol.IE | Fax: +353 1 294-0969
----------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199709161115.MAA27536>