From owner-freebsd-scsi Tue Sep 16 04:15:23 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id EAA18507 for freebsd-scsi-outgoing; Tue, 16 Sep 1997 04:15:23 -0700 (PDT) Received: from gatekeeper.acucobol.ie (gatekeeper.acucobol.ie [194.125.135.194]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id EAA18477; Tue, 16 Sep 1997 04:15:10 -0700 (PDT) Received: (from daemon@localhost) by gatekeeper.acucobol.ie (8.8.5/8.8.5) id MAA25170; Tue, 16 Sep 1997 12:12:18 +0100 (IST) Received: from guinness.acucobol.ie(194.125.135.195) by gatekeeper.acucobol.ie via smap (V2.0beta) id xma025158; Tue, 16 Sep 97 12:12:15 +0100 Received: from guinness (localhost [127.0.0.1]) by guinness.acucobol.ie (8.8.5/8.8.5) with ESMTP id MAA27536; Tue, 16 Sep 1997 12:15:38 +0100 (BST) Message-Id: <199709161115.MAA27536@guinness.acucobol.ie> From: "John McLaughlin" To: hardware@freebsd.org, scsi@freebsd.org Subject: Adaptec 1542CP on Compaq Prosignia VS problems Date: Tue, 16 Sep 1997 12:15:38 +0100 Sender: owner-freebsd-scsi@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, I'm running 2.2.2 on the above, which has started to intermittently give the following errors: aha0: Bus dropped at unexpected time aha0: Invalid bus phase/sequence sd0(aha0:0:0): UNIT ATTENTION asc:29,0 sd0(aha0:0:0): Power on, reset, or bus device reset occurred , retries:4 aha0: Invalid bus phase/sequence aha0: Invalid bus phase/sequence sd0(aha0:0:0): timed out sd0(aha0:0:0): UNIT ATTENTION asc:29,0 sd0(aha0:0:0): Power on, reset, or bus device reset occurred , retries:2 aha0: Invalid bus phase/sequence sd0(aha0:0:0): UNIT ATTENTION asc:29,0 sd0(aha0:0:0): Power on, reset, or bus device reset occurred , retries:4 And the dmesg output is: Copyright (c) 1992-1997 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.2-RELEASE #0: Wed Jul 23 11:40:00 IST 1997 root@holsten.acucobol.ie:/usr/src/sys/compile/HOLSTEN CPU: i486 DX2 (486-class CPU) Origin = "GenuineIntel" Id = 0x435 Stepping=5 Features=0x3 real memory = 16777216 (16384K bytes) avail memory = 14864384 (14516K bytes) eisa0: Probing for devices on the EISA bus eisa0:8 unknown device Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 not found at 0x2f8 sio2: disabled, not probed. sio3: disabled, not probed. lpt0 at 0x3bc-0x3c3 irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in aha0 at 0x330-0x333 irq 11 drq 5 on isa aha0 waiting for scsi devices to settle (aha0:0:0): "COMPAQ M2694ES-512 952B" type 0 fixed SCSI 2 sd0(aha0:0:0): Direct-Access 1001MB (2051000 512 byte sectors) (aha0:2:0): "TANDBERG TDC 3600 =08:" type 1 removable SCSI 2 st0(aha0:2:0): Sequential-Access density code 0x0, drive empty (aha0:4:0): "ARCHIVE Python 27871-XXX 4.BG" type 1 removable SCSI 2 st1(aha0:4:0): Sequential-Access density code 0x13, drive empty lnc0 at 0x8800-0x8817 irq 10 drq 0 on eisa slot 8 lnc0: PCnet-32 VL-Bus address 00:80:5f:18:d9:9c npx0 flags 0x1 on motherboard npx0: INT 16 interface It was working fine for about 6 weeks after the install, before the started turning up regularly, so I'd guess it's either a problem with the controller, or the disk. Is it possibly a problem with the setup on the card, or possibly the fact that it's all sitting inside a Compaq? Any suggestions much appreciated. Thanks, John ---------------------------------------------------------------------- John McLaughlin | Acucobol Ireland Ltd. IS Manager, Europe | South Co. Business Park | Dublin 18, Ireland. e-Mail: jmcl@Acucobol.IE | Phone: +353 1 294-0967 John.McLaughlin@Acucobol.IE | Fax: +353 1 294-0969 ----------------------------------------------------------------------