Date: 15 Jun 2001 21:17:19 +0900 From: CHOI Junho <cjh@kr.FreeBSD.ORG> To: Nick Sayer <nsayer@quack.kfu.com> Cc: Stacy Millions <stacy@millions.ca>, freebsd-mobile@FreeBSD.ORG Subject: Re: VAIO Z505V/BP Message-ID: <864rtikkds.fsf_-_@gradius.wdb.co.kr> In-Reply-To: <3B210E54.6050207@quack.kfu.com> References: <86vgm7fz4r.fsf@gradius.wdb.co.kr> <3B20E6B8.6EB8A155@millions.ca> <3B210E54.6050207@quack.kfu.com>
next in thread | previous in thread | raw e-mail | index | archive | help
>>>>> "NS" == Nick Sayer <nsayer@quack.kfu.com> writes:
NS> -current actually _is_ now a "PnP OS", so you should leave it on for
NS> both Windows and FreeBSD. This may explain why your sound is not
NS> working too (or perhaps not).
> device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
> is what I have in my config. It would be "irq 0" for polling mode.
NS> Turn PnP OS back on and try irq 0. It might work
pccard is ok. but sound is still bad... it probed but can't play.
> cat /dev/sndstat
FreeBSD Audio Driver (newpcm) Jun 13 2001 16:59:15
Installed devices:
pcm0: <Yamaha DS-1E (YMF744)> at memory 0xfecf0000 irq 9 (4p/2r/0v channels duplex default)
When I play some mp3, dmesg says:
pcm0: play interrupt timeout, channel dead
NS> As for your question about the spic driver, you use it by opening
NS> "/dev/jogdial" and reading it. Every turn of the jogdial gives you
NS> either an "R" or an "L", and if you push the button in you get "D" and
NS> when you let it out you get "U".
I can't read anything from /dev/jogdial. It appears(in devfs) but when
I do 'cat /dev/jogdial' and moving the jogdial doesn't give any
output. and dmesg still says when probing spic:
spic0: <Sony Programmable I/O Controller> at port 0x65-0x69 on isa0
spic busy wait abort
spic busy wait abort
spic busy wait abort
spic busy wait abort
My FreeBSD version and complete bootlog:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Jun 13 17:03:40 KST 2001
root@nemesis.wdb.co.kr:/usr/obj/usr/src/sys/GRADIUS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (595.57-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 201261056 (196544K bytes)
avail memory = 190640128 (186172K bytes)
Preloaded elf kernel "kernel" at 0xc04f6000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04f609c.
Preloaded elf module "splash_bmp.ko" at 0xc04f60ec.
Preloaded elf module "vesa.ko" at 0xc04f6190.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc04f622c.
Pentium Pro MTRR support enabled
VESA: v2.0, 8128k memory, flags:0x0, mode table:0xc0433342 (1000022)
VESA: ATI MACH64
Using $PIR table, 7 entries at 0xc00fdf50
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcb0-0xfcbf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfc60-0xfc7f at device 7.2 on pci0
pci_cfgintr_unique: hard-routed to irq 9
pci_cfgintr: 0:7 INTD routed to irq 9
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Philips Semiconductors hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 3 ports with 3 removable, self powered
umass0: Sony USB Memory Stick Slot, rev 1.10/1.31, addr 3
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
pci0: <serial bus, FireWire> at 8.0 (no driver attached)
pcm0: <Yamaha DS-1E (YMF744)> mem 0xfecf0000-0xfecf7fff irq 9 at device 9.0 on pci0
pci0: <simple comms> at 10.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem 0xfed00000-0xfedfffff,0xfecff000-0xfecfffff irq 9 at device 11.0 on pci0
fxp0: Ethernet address 08:00:46:0e:52:a8
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci_cfgintr_unique: hard-routed to irq 9
pci_cfgintr: 0:12 INTA routed to irq 9
pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 9 at device 12.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
spic0: <Sony Programmable I/O Controller> at port 0x65-0x69 on isa0
spic busy wait abort
spic busy wait abort
spic busy wait abort
spic busy wait abort
unknown: <PNP0c02> can't assign resources
unknown: <PNP0c02> can't assign resources
unknown: <PNP0501> can't assign resources
DUMMYNET initialized (010124)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
ad0: 14403MB <HITACHI_DK23BA-15> [29264/16/63] at ata0-master UDMA33
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
Mounting root from ufs:/dev/ad0s3a
linprocfs registered
--
+++ Any opinions in this posting are my own and not those of my employers +++
CHOI Junho [sleeping now] <http://www.kr.FreeBSD.org/~cjh>;
[while sleeping] <cjh @ kr.FreeBSD.ORG> <cjh @ FreeBSD.ORG> <cjh @ wdb.co.kr>
Korea FreeBSD Users Group <www.kr.FreeBSD.org> Web Data Bank<www.wdb.co.kr>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?864rtikkds.fsf_-_>