Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 17 Oct 2004 19:45:14 +0200
From:      "Daniel Eriksson" <daniel_k_eriksson@telia.com>
To:        <freebsd-current@freebsd.org>
Subject:   RE: Current crash on today's kernel
Message-ID:  <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAAFHxFM8wzg0iNt6TkDzk3zAEAAAAA@telia.com>
In-Reply-To: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAAvqPackdfzkCveuPnGBOmMwEAAAAA@telia.com>

next in thread | previous in thread | raw e-mail | index | archive | help

Sorry about the lack of details in the previous message!

The machine is using both ataraid and gvinum. (But cannot use geom_stripe
since it doesn't want to play nice with ataraid.)

At the time of the crash I was pulling data off of it using Samba, and there
was also at least two fast uploads to filesystem using sftp.

When using ACPI there seems to be some sort of interrupt problem, possibly
with the SATA controller. It results in an unusually high interrupt load
even when the machine is mostly idle. I will try with ACPI again after I
switch some cards around.

Below is the dmesg, mptable and vmstat -i output.

/Daniel Eriksson


KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Sun Oct 17 15:14:55 CEST 2004
    daniel@xxx.xxx.xxx:/usr/obj/usr/src/sys/XXX
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) MP 2600+ (2000.08-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
 
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 1073217536 (1023 MB)
avail memory = 1040691200 (992 MB)
MPTable: <TYAN     PAULANER    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  1
 cpu1 (AP): APIC ID:  0
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> port 0x1490-0x1493 mem
0xea100000-0xea100fff,0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 UDMA100 controller> port
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0x1400-0x143f mem 0xe8000000-0xe803ffff,0xe8080000-0xe809ffff irq 16 at
device 8.0 on pci0
em0: Ethernet address: 00:04:23:ac:20:8a
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0x1440-0x147f mem 0xe8040000-0xe807ffff,0xe80a0000-0xe80bffff irq 17 at
device 8.1 on pci0
em1: Ethernet address: 00:04:23:ac:20:8b
em1:  Speed:N/A  Duplex:N/A
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x1000-0x10ff mem
0xe80c0000-0xe80c0fff irq 17 at device 9.0 on pci0
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pcib2: <MPTable PCI-PCI bridge> at device 16.0 on pci0
pci2: <PCI bus> on pcib2
atapci1: <Promise PDC20318 SATA150 controller> port
0x3000-0x307f,0x30c0-0x30cf,0x3080-0x30bf mem
0xea000000-0xea01ffff,0xea021000-0xea021fff irq 16 at device 4.0 on pci2
atapci1: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
ata4: channel #2 on atapci1
ata5: channel #3 on atapci1
atapci2: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port
0x2000-0x20ff,0x30d0-0x30d3,0x30d8-0x30df,0x30d4-0x30d7,0x30e0-0x30e7 irq 17
at device 5.0 on pci2
ata6: channel #0 on atapci2
ata7: channel #1 on atapci2
atapci3: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port
0x2400-0x24ff,0x30e8-0x30eb,0x30f0-0x30f7,0x30ec-0x30ef,0x30f8-0x30ff irq 17
at device 5.1 on pci2
ata8: channel #0 on atapci3
ata9: channel #1 on atapci3
atapci4: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port
0x2800-0x28ff,0x3400-0x3403,0x3408-0x340f,0x3404-0x3407,0x3410-0x3417 irq 19
at device 7.0 on pci2
ata10: channel #0 on atapci4
ata11: channel #1 on atapci4
atapci5: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port
0x2c00-0x2cff,0x3418-0x341b,0x3420-0x3427,0x341c-0x341f,0x3428-0x342f irq 19
at device 7.1 on pci2
ata12: channel #0 on atapci5
ata13: channel #1 on atapci5
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default
to accept, logging unlimited
ad0: 117800MB <IC35L120AVV207-0/V24OA66A> [239340/16/63] at ata0-master
UDMA100
ad1: 117800MB <HDS722512VLAT20/V33OA60A> [239340/16/63] at ata0-slave
UDMA100
ad2: 117800MB <IC35L120AVV207-0/V24OA66A> [239340/16/63] at ata1-master
UDMA100
ad3: 117800MB <IC35L120AVV207-0/V24OA66A> [239340/16/63] at ata1-slave
UDMA100
em0: Link is up 1000 Mbps Full Duplex
ad4: 239372MB <Maxtor 7Y250M0/YAR51EW0> [486344/16/63] at ata2-master
SATA150
ad6: 238475MB <WDC WD2500JD-00FYB0/02.05D02> [484521/16/63] at ata3-master
SATA150
ad8: 239372MB <Maxtor 6B250S0/BANC1980> [486344/16/63] at ata4-master
SATA150
em1: Link is up 100 Mbps Full Duplex
ad12: 238475MB <WDC WD2500JB-00FUA0/15.05R15> [484521/16/63] at ata6-master
UDMA100
ad13: 238475MB <WDC WD2500JB-00FUA0/15.05R15> [484521/16/63] at ata6-slave
UDMA100
ad14: 239372MB <Maxtor 4A250J0/RAMB1TU0> [486344/16/63] at ata7-master
UDMA133
ad15: 239372MB <Maxtor 5A250J0/RAMB1TV0> [486344/16/63] at ata7-slave
UDMA133
ad16: 194481MB <Maxtor 6Y200P0/YAR41BW0> [395136/16/63] at ata8-master
UDMA133
ad17: 194481MB <Maxtor 6Y200P0/YAR41VW0> [395136/16/63] at ata8-slave
UDMA133
ad18: 194481MB <Maxtor 6Y200P0/YAR41BW0> [395136/16/63] at ata9-master
UDMA133
ad19: 239372MB <Maxtor 7Y250P0/YAR41BW0> [486344/16/63] at ata9-slave
UDMA133
ad20: 114473MB <ST3120022A/3.06> [232581/16/63] at ata10-master UDMA100
ad21: 114473MB <ST3120022A/3.06> [232581/16/63] at ata10-slave UDMA100
ad22: 117246MB <Maxtor 6Y120L0/YAR41BW0> [238216/16/63] at ata11-master
UDMA133
ad23: 117246MB <Maxtor 6Y120L0/YAR41BW0> [238216/16/63] at ata11-slave
UDMA133
ad24: 114473MB <WDC WD1200JB-00DUA3/75.13B75> [232581/16/63] at ata12-master
UDMA100
ar0: 476950MB <ATA RAID0 array> [60802/255/63] status: READY subdisks:
 disk0 READY on ad12 at ata6-master
 disk1 READY on ad13 at ata6-slave
ar1: 478744MB <ATA RAID0 array> [61031/255/63] status: READY subdisks:
 disk0 READY on ad14 at ata7-master
 disk1 READY on ad15 at ata7-slave
ar2: 388962MB <ATA RAID0 array> [49585/255/63] status: READY subdisks:
 disk0 READY on ad17 at ata8-slave
 disk1 READY on ad16 at ata8-master
ar3: 228946MB <ATA RAID0 array> [29186/255/63] status: READY subdisks:
 disk0 READY on ad23 at ata11-slave
 disk1 READY on ad24 at ata12-master
Waiting 5 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <Seagate STT20000N 6A51> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS 10K 9WLS UCH0> Fixed Direct Access SCSI-3 device 
da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 8759MB (17938986 512 byte sectors: 255H 63S/T 1116C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS 10K 9WLS UCH0> Fixed Direct Access SCSI-3 device 
da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 8759MB (17938986 512 byte sectors: 255H 63S/T 1116C)
da2 at ahc0 bus 0 target 10 lun 0
da2: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device 
da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da3 at ahc0 bus 0 target 11 lun 0
da3: <IBM IC35L036UWD210-0 S5CQ> Fixed Direct Access SCSI-3 device 
da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da3: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da4 at ahc0 bus 0 target 12 lun 0
da4: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device 
da4: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da4: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da5 at ahc0 bus 0 target 13 lun 0
da5: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device 
da5: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da5: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: point_to_point kickstart.
kernel dumps on /dev/da0s1b
swapon: adding /dev/da0s1b as swap device
swapon: adding /dev/da1s1b as swap device
Starting file system checks:
/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 197205 free (1333 frags, 24484 blocks, 0.5%
fragmentation)
/dev/da1s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da1s1e: clean, 913768 free (32 frags, 114217 blocks, 0.0%
fragmentation)
/dev/da0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1e: clean, 253813 free (21 frags, 31724 blocks, 0.0% fragmentation)
/dev/da1s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da1s1d: clean, 198959 free (2087 frags, 24609 blocks, 0.4%
fragmentation)
/dev/da0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1f: clean, 1026218 free (20410 frags, 125726 blocks, 0.8%
fragmentation)
/dev/da0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1d: clean, 182953 free (393 frags, 22820 blocks, 0.2%
fragmentation)
net.inet.tcp.sendspace: 32768 -> 262144
net.inet.tcp.recvspace: 65536 -> 262144
kern.ipc.maxsockbuf: 262144 -> 2097152
kern.maxfiles: 12328 -> 32768
kern.maxfilesperproc: 11095 -> 16384
kern.ipc.somaxconn: 128 -> 1024
net.inet.ip.intr_queue_maxlen: 50 -> 500
net.isr.enable: 0 -> 1
Setting hostname: xxx.xx.xxx
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet xxx.xxx.xxx.xxx netmask 0xffffff00 broadcast xxx.xxx.xxx.255
        ether 00:04:23:ac:20:8a
        media: Ethernet autoselect
        status: no carrier
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.xxx.1 netmask 0xffffff00 broadcast 192.168.xxx.255
        ether 00:04:23:ac:20:8b
        media: Ethernet autoselect
        status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000 





============================================================================
===

MPTable, version 2.0.15

----------------------------------------------------------------------------
---

MP Floating Pointer Structure:

  location:                     BIOS
  physical address:             0x000f7170
  signature:                    '_MP_'
  length:                       16 bytes
  version:                      1.4
  checksum:                     0x43
  mode:                         Virtual Wire

----------------------------------------------------------------------------
---

MP Config Table Header:

  physical address:             0x0009e470
  signature:                    'PCMP'
  base table length:            316
  version:                      1.4
  checksum:                     0x8c
  OEM ID:                       'TYAN    '
  Product ID:                   'PAULANER    '
  OEM table pointer:            0x00000000
  OEM table size:               0
  entry count:                  31
  local APIC address:           0xfee00000
  extended table length:        324
  extended table checksum:      18

----------------------------------------------------------------------------
---

MP Config Base Table Entries:

--
Processors:     APIC ID Version State           Family  Model   Step
Flags
                 1       0x10    BSP, usable     6       10      0
0x383fbff
                 0       0x10    AP, usable      6       10      0
0x383fbff
--
Bus:            Bus ID  Type
                 0       PCI   
                 1       PCI   
                 2       PCI   
                 3       ISA   
--
I/O APICs:      APIC ID Version State           Address
                 2       0x11    usable          0xfec00000
--
I/O Ints:       Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#
                ExtINT  active-hi        edge        3     0          2    0
                INT     active-hi        edge        3     1          2    1
                INT     active-hi        edge        3     0          2    2
                INT     active-lo       level        0   8:B          2   17
                INT     active-hi        edge        3     4          2    4
                INT     active-lo       level        0   8:A          2   16
                INT     active-hi        edge        3     6          2    6
                INT     active-hi        edge        3     7          2    7
                INT     active-hi        edge        3     8          2    8
                INT     active-hi        edge        3     9          2    9
                INT     active-lo       level        2   7:A          2   19
                INT     active-lo       level        1   5:A          2   18
                INT     active-hi        edge        3    12          2   12
                INT     active-hi        edge        3    13          2   13
                INT     active-hi        edge        3    14          2   14
                INT     active-hi        edge        3    15          2   15
                INT     active-lo       level        0   9:A          2   17
                INT     active-lo       level        2   0:C          2   19
                INT     active-lo       level        2   4:A          2   16
                INT     active-lo       level        2   5:A          2   17
                INT     active-lo       level        2   5:A          2   17
                INT     active-lo       level        2   7:A          2   19
--
Local Ints:     Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#
                ExtINT  active-hi        edge        3     0        255    0
                NMI     active-hi        edge        1   0:A        255    1

----------------------------------------------------------------------------
---

MP Config Extended Table Entries:

--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0x0
 address range: 0x10000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0x40000000
 address range: 0xaa100000
--
System Address Space
 bus ID: 0 address type: prefetch address
 address base: 0xea100000
 address range: 0xdf00000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xf8000000
 address range: 0x6e00000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xfee01000
 address range: 0x11ff000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xa0000
 address range: 0x24000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xc8000
 address range: 0x2000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xcc000
 address range: 0x2000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd0000
 address range: 0x1000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd2000
 address range: 0x1000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd4000
 address range: 0x1000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd6000
 address range: 0x1000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd8000
 address range: 0x2000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xe0000
 address range: 0x12000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xf8000
 address range: 0x4000
--
Bus Heirarchy
 bus ID: 3 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000000
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000001

============================================================================
===



# vmstat -i
interrupt                          total       rate
irq1: atkbd0                           2          0
irq0: clk                        5142796        995
irq4: sio0                          1056          0
irq6: fdc0                            10          0
irq8: rtc                         658343        127
irq13: npx0                            1          0
irq14: ata0                       205255         39
irq15: ata1                       205046         39
irq16: em0 atapci1              11635073       2251
irq17: em1 ahc0++                6549430       1267
irq19: atapci4+                   442467         85
Total                           24839479       4807





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAAFHxFM8wzg0iNt6TkDzk3zAEAAAAA>