Date: Fri, 8 Sep 2017 06:43:14 +0930 From: "Priyadarshana Chandrasena" <vpc@ulka.com.au> To: "'Maciej Suszko'" <maciej@suszko.eu> Cc: <FreeBSD-stable@FreeBSD.org> Subject: RE: HP Smart array P440 support Message-ID: <000601d3281e$22b2cef0$68186cd0$@ulka.com.au> In-Reply-To: <20170907140351.34724dd2@helium> References: <001501d323f2$3e517560$baf46020$@ulka.com.au> <20170903211908.510b5724@leo> <20170907140351.34724dd2@helium>
next in thread | previous in thread | raw e-mail | index | archive | help
I have not installed FreeBSD using iLo and virtual CD method. I will read
about this method and try it out.
Thanks.
-----Original Message-----
From: Maciej Suszko [mailto:maciej@suszko.eu]
Sent: Thursday, 7 September 2017 9:34 PM
To: Priyadarshana Chandrasena
Cc: FreeBSD-stable@FreeBSD.org
Subject: Re: HP Smart array P440 support
On Sun, 3 Sep 2017 21:19:08 +0200
Maciej Suszko <maciej@suszko.eu> wrote:
> "Priyadarshana Chandrasena" <vpc@ulka.com.au> wrote:
> > I have HP DL20 Gen 9 server. But I can not install FreeBSD 10.2 in
> > it. I have a HP smart array P440 in my server. I can not find out
> > anywhere if ciss driver support include HP Gen 9 storage
> > controllers. Could you please update the ciss driver in 10.3?
>
> Hi,
>
> Got two DL20 with P440, UEFI booted 11.0 to logical disk (raid array).
> In a few days I plan to boot it in HBA mode, we'll see if it's working.
Just tested, HBA mode... Machine BIOS U22 v1.80, one-time booted in Legacy
mode with mfsBSD iso in Virtual CD drive (through iLO), recreated system
zpool to mirror of 2 drives, booted in UEFI mode - it does work.
#v+
root@storage-04:~ # camcontrol inquiry da2
pass2: <HP EG0300JFCKA HPD4> Fixed Direct Access SPC-4 SCSI device
pass2: Serial Number S4226CNT0000M70507YN
pass2: 135.168MB/s transfers, Command Queueing Enabled
root@storage-04:~ # camcontrol inquiry da3
pass3: <HP EG0300JFCKA HPD4> Fixed Direct Access SPC-4 SCSI device
pass3: Serial Number S4226CHH0000M70540VJ
pass3: 135.168MB/s transfers, Command Queueing Enabled
root@storage-04:~ # zpool status rpool
pool: rpool
state: ONLINE
scan: scrub repaired 0 in 0h2m with 0 errors on Thu Sep 7 11:56:31 2017
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
da2p3 ONLINE 0 0 0
da3p3 ONLINE 0 0 0
errors: No known data errors
#v-
[ c u t ]
--
regards, Maciej Suszko.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000601d3281e$22b2cef0$68186cd0$>