Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 15 Jan 2006 20:20:20 +0100
From:      vocativus <vocativus@interia.pl>
To:        freebsd-questions@FreeBSD.org
Subject:   help me....
Message-ID:  <3310581388.20060115202020@interia.pl>

next in thread | raw e-mail | index | archive | help
Hello


I can't english well (I'm in the middle of learn) so I may make a
mistakes.

So... I have a big problem with FreeBSD system. I was download a CD
images from FreeBSD site, I burn it on CD and install system on hard
disk. All working well. In last week I bought new computer (processor,
motherboard with graphic card, and DVD - RAM recorder).

I was load CD 1, chosen default boot, next - standard, chosen ok in
window, where was about fdisk, chosen ad0. Next I was saw comunique:



Warning: A geometry of 77545/16/63 for ad0 is incorrect. Using a more
likely geometry. If this geometry is incorrect or you are unsure as to
whether or not it's correct, please consult the Hardware Guide in the
Documentation submenu or use the (G)eometry command to change it now

Remember: you need to enter whatever your BIOS thinks the geometry is!
For IDE it's what yoy were told in the BIOS setup. For SCSI, it's the
translation mode your controller is using. Do NOT use a "physical geometry"



I chosen od, made partition and slices, chosen install, and I saw a
communique, where I read about error, that computer can't write data
on disk and it's end of instalation

Configuration of my old computer:


motherboart: ASrock k7s8x,
384MB RAM,
GeForce 2 MX 400,
Hard Disks: Western Digital 40 GB (ATA 133), i Samsung 60GB (ATA 133).
Processor: Duron 1400
Ethernet Card (LAN) - SIS 10/100 integrated with motherboard
Sound Card - AC 97 <- system didn't detect it correctly


Configuration of my new computer:

motherboard: 939NF4G - SATA2
Processor: AMD Athlon 64 3200+ venice socket 939
Graphic card - integrated with motherboard - GeForce 6100 - memory
128MB
LAN - integrated with motherboard -  Realtek PHY RTL8201CL
Sound card -  Realtek ALC850 7.1channel AC'97 audio codec
RAM - 768MB (128 MB shared by Graphic Card, so aviable is 640MB)
BIOS wersion - AMI P1.30


Help me ;(    I was searching in the Hardware Guide, and I searched
somethink about this problem. I read, that I must write a command, but
I don't know how and where. This is this command:

/stand/sysinstall [var=value ..] [command ..]


I was read, that I must put 'geometry' instead of value. And enter
into:

/usr/local/bin/configPackages



Help me... ;(  I don't know what to do...

If it's possible, I solicit for some exect leads, because I'm
beginning in linux systems and if you can (may) write in polish ;)



Ps. I'm sory for mistakes :)







===============================
Polish wersion of this message:
===============================

Witam!


Mam duży problem z FreeBSD. Mianowicie... ściągłem sobie system ze
strony www.freebsd.org  wypaliłem na 2 płytach CD i zainstalowałem.
Wszystko dobrze chodziło... do czasu aż zmieniłem komputer tzn. dysk
twardy, RAM i nagrywarke mam ze starego. Moja stara konfiguracja:

Płyta gł. ASrock k7s8x,
384MB RAM,
GeForce 2 MX 400,
Dyski twarde: Western Digital 40 GB (ATA 133), i Samsung 60GB (ATA 133).
Procesor: Duron 1400
Karta sieciowa - SIS 10/100 zintegrowana z płytą główną
Karta dźwiękowa - AC 97 <- system jej nie wykrywał poprawnie

Na powyższym sprzęcie system pracował bezbłędnie, z wyjątkiem
wspomnianej karty dźwiękowej.


Moja obecna konfiguracja:

Pł. główna: 939NF4G - SATA2
Procesor: AMD Athlon 64 3200+ venice socket 939
Karta graficzna - zintegrowana z płytą główną - GeForce 6100 - pamięć
128MB
Karta sieciowa - zintegrowana z płytą główną -  Realtek PHY RTL8201CL
Karta dźwiękowa -  Realtek ALC850 7.1channel AC'97 audio codec
RAM - 768MB (128 zarezerwowane dla karty graficznej więc dostępne jest
640MB RAM)
Wersja BIOS-u - P1.30


I wziąłem wyczyszczony dysk (bez jakichkolwiek partycji) podłączony
jako jedyny dysk, po wybraniu opcji default boot, wybraniu opcji
standard, naciśnięciu ok w oknie gdzie pisze coś o fdisk-u, wybraniu
dysku - w moim przypadku ad0 wyświetla sie komunikat:



Warning: A geometry of 77545/16/63 for ad0 is incorrect. Using a more
likely geometry. If this geometry is incorrect or you are unsure as to
whether or not it's correct, please consult the Hardware Guide in the
Documentation submenu or use the (G)eometry command to change it now

Remember: you need to enter whatever your BIOS thinks the geometry is!
For IDE it's what yoy were told in the BIOS setup. For SCSI, it's the
translation mode your controller is using. Do NOT use a "physical geometry"



I nic dałem na ok, rozplanowałem partycje dałem na instaluj i pojawił
mi się komunikat o błędzie, że nie można zapisać danych na dysk i na
tym koniec.

Próbowałem zainstalować FreeBSD w wersji 5.4 (i386), 6.0 (i386), 6.0
(AMD 64) i ciągle się pojawia ten komunikat.

Jeśli to Was pocieszy, to linux SuSE nie wykrył mi wogóle żadnego
sprzętu, za wyjątkiem drukarki. Czy ja mam na tyle nietypową
konfiguracje, że żaden linux nie jest w stanie prawidłowo rozpoznać
mojego sprzętu???

Nie byłoby takiego problemu, gdyby nie to, że musze mieć linuxa, bo
chodzę do liceum na profil matematyczno - fizyczno - informatyczny i
linuxa musze mieć... Prędzej też go miałem zainstalowanego, ale
głównie do zabawy, w celu poznania czegoś innego oprócz windowsa. I
musze powiedzieć, że FreeBSD to, jak dotąd najlepszy linux, z jakim
się spotkałem. Jego instalacja jest z leksza dziwna, ale z 23 -
stronicową instrukcją instalacji nie ma najmniejszego problemu.
FreeBSD zaskoczył mnie głównie prostotą i niemalże całkowitą
automatyzacją instalacji programów, np. poprzez porty. To doskonałe
rozwiązanie. I właśnie dlatego wybrałem FreeBSD - jest funkcjonalny,
na tych dwóch płytach jest więcej oprogramowania niż w innych
dystrybucjach. Jest łatwy w obsłude, chociaż musze przyznać, że
początki były tragiczne... ale to chyba normalne. Grunt to sie
przyzwyczaić :)


Dlatego prosze Was o pomoc... kompletnie nie wiem co robić...
pooomooocyyyyyyyyy ;(

========================
end of polish message...
========================



----------------------------------------------------------------------
Kliknij po wiecej! >>> http://link.interia.pl/f18ed




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3310581388.20060115202020>