Date: Sat, 25 Sep 1999 18:11:41 -0400 From: Christopher Michaels <ChrisMic@clientlogic.com> To: 'Rick Knebel' <rknebel@uplink.net> Cc: "FreeBSD Questions (E-mail)" <questions@FreeBSD.org> Subject: RE: Updating KDE (was: kscd) Message-ID: <6C37EE640B78D2118D2F00A0C90FCB4401105CA3@site2s1>
next in thread | raw e-mail | index | archive | help
Rick, So you didn't update your ports collection in any way? That would be why it's still downloading 1.1.1. You need to keep /usr/ports up to date for you to keep up with any changes. I belive you could also use /stand/sysinstall and download the pre-built (packages) but overall I think it's better to learn CVSup anyway. I'm going to make the assumption you are running 3.x here. Take a look at http://www.freebsd.org/handbook/stable.html and http://www.freebsd.org/handbook/synching.html If you are confused about this, #1 look at the mailing list archives, and #2 ask the mailing list. This topic was beat to death maybe 2 months ago. Good luck, Chris > -----Original Message----- > From: Rick Knebel [SMTP:rknebel@uplink.net] > Sent: Saturday, September 25, 1999 5:40 PM > To: Christopher Michaels > Subject: Re: Updating KDE (was: kscd) > > On Sat, Sep 25, 1999 at 05:30:54PM -0400, Christopher Michaels wrote: > > How did you do that? Did you cvsup to update your ports? > > > > Take a look in /usr/ports/x11/kdelibs11/Makefile and see what version it > is > > supposed to be downloading. If it says kdelibs-1.1.1 and not > kdelibs-1.1.2 > > than something didn't update properly. > > > No I did not cvsup, but I keep hearing about this. > how do i do this? > > Thaaaanks > Rick > > > > > -Chris > > > > > -----Original Message----- > > > From: Rick Knebel [SMTP:rknebel@uplink.net] > > > Sent: Saturday, September 25, 1999 5:18 PM > > > To: Christopher Michaels > > > Subject: Re: kscd > > > > > > On Sat, Sep 25, 1999 at 04:57:15PM -0400, Christopher Michaels wrote: > > > > Rick, > > > > That doesn't work. If you were to type 'kscd -h' you'd find out > that -d > > > is > > > > debug mode not an option for decice naming (assuming it didn't core > > > dump). > > > > What you need to do is edit the kscdrc as stated in the e-mail that > I > > > > forwarded to you. > > > > > > > > (I found the -d thing out the hard way.) > > > > > > > > -Chris > > > > > > Thanks again. > > > > > > Maybe you can help me with another problem. > > > > > > I had kde 1.1.1 runnning so i uninstalled it all and downloaded the > > > metaport > > > for kde-1.1.2. > > > > > > When it starts downloading things it starts with kde-libs1.1.1 which > is > > > the > > > old version. > > > > > > Am I missing something? > > > > > > Thanks > > > Rick > > > > > > > > > > > > > > > > P.S. The kscd with 1.1.2 actually doesn't core dump but gave an > error > > > > opening the device. You may want to consider upgrading kde if you > > > haven't > > > > already. > > > > > > > > > -----Original Message----- > > > > > From: Rick Knebel [SMTP:rknebel@uplink.net] > > > > > Sent: Saturday, September 25, 1999 4:16 PM > > > > > To: Christopher Michaels > > > > > Subject: Re: kscd > > > > > > > > > > On Sat, Sep 25, 1999 at 04:12:10PM -0400, Christopher Michaels > wrote: > > > > > > Rick, > > > > > > Ok, my bad... > > > > > > How did you assign a device? And what device did you assign it? > > > > > > > > > > When I start xcdplayer i do xcdplayer -device /dev/racd0c > > > > > so for kscd -d /dev/racd0c > > > > > > > > > > Thanks > > > > > Rick > > > > > > > > > > > > > > > > > > > > -Chris > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: Rick Knebel [SMTP:rknebel@uplink.net] > > > > > > > Sent: Saturday, September 25, 1999 4:06 PM > > > > > > > To: Christopher Michaels > > > > > > > Subject: Re: kscd > > > > > > > > > > > > > > On Sat, Sep 25, 1999 at 04:04:54PM -0400, Christopher Michaels > > > wrote: > > > > > > > > This was JUST covered a couple days ago. I'm attaching the > last > > > > > message > > > > > > > of > > > > > > > > that thread. > > > > > > > I appreciate your reply, but that does not tell me anything > else. > > > > > > > i saicdin my message I already tried assigning a device. > > > > > > > > > > > > > > Thanks > > > > > > > Rick > > > > > > > > > > > > > > > > > > > > > > > > > > > > > <<Re: KSCD...>> > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > From: Rick Knebel [SMTP:rknebel@uplink.net] > > > > > > > > > Sent: Saturday, September 25, 1999 3:18 PM > > > > > > > > > To: questions@freebsd.org > > > > > > > > > Subject: kscd > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > Whats with kscd. It core dumps every time I use it even if > i > > > > > assign a > > > > > > > > > device. > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > Rick > > > > > > > > > > > > > > > > > > -- > > > > > > > > > Rick Knebel > > > > > > > > > rknebel@uplink.net > > > > > > > > > http://rknebel.uplink.net > > > > > > > > > > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > > > > with "unsubscribe freebsd-questions" in the body of the > > > message > > > > > > > > > > > > > > Content-Description: Re: KSCD... > > > > > > > > Message-ID: <19990922175532.A279@marder-1> > > > > > > > > From: Mark Ovens <mark@ukug.uk.freebsd.org> > > > > > > > > To: Christopher Michaels <ChrisMic@clientlogic.com> > > > > > > > > Cc: "FreeBSD Questions (E-mail)" <questions@FreeBSD.org> > > > > > > > > Subject: Re: KSCD... > > > > > > > > Date: Wed, 22 Sep 1999 12:55:32 -0400 > > > > > > > > MIME-Version: 1.0 > > > > > > > > X-Mailer: Internet Mail Service (5.5.2448.0) > > > > > > > > Content-Type: text/plain; > > > > > > > > charset="iso-8859-1" > > > > > > > > > > > > > > > > On Tue, Sep 21, 1999 at 08:26:01PM -0400, Christopher > Michaels > > > > > wrote: > > > > > > > > > Mark, > > > > > > > > > I'm not the original posted, but THANK YOU! I found all > of > > > the > > > > > below > > > > > > > info > > > > > > > > > in the mailing list archives about a month ago, except for > > > what > > > > > > > exactly > > > > > > > > had > > > > > > > > > to go in the rc file. Mine was blank just as you had > > > described, > > > > > and I > > > > > > > > just > > > > > > > > > gave up on it for the time being. > > > > > > > > > > > > > > > > > > I wonder if the maintainer of the port should print some > kind > > > of > > > > > > > message > > > > > > > > at > > > > > > > > > the end of a 'make install' to this effect, or if it could > be > > > put > > > > > in a > > > > > > > FAQ > > > > > > > > > somewhere. > > > > > > > > > > > > > > > > > > > > > > > > > Well something should be done (I'm not overly concerned > myself > > > > > > > > because I don't use it anymore) because the program core > dumping > > > > > > > > just because the wrong CD device is specifed is *bad*. At > least > > > a > > > > > > > > message along the lines of "/dev/rmatcd0: device not found. > Try > > > > > > > > using the -d option to specify the correct device" would > point > > > all > > > > > > > > but a very few people to the solution. Of course, using a > > > sensible > > > > > > > > default device would be sensible as well, ideally /dev/rwcd0 > > > since > > > > > > > > most users will have ATAPI CD-ROMs. > > > > > > > > > > > > > > > > > -Chris > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > From: Mark Ovens [SMTP:mark@ukug.uk.freebsd.org] > > > > > > > > > > Sent: Tuesday, September 21, 1999 4:07 PM > > > > > > > > > > To: Luis Rios > > > > > > > > > > Cc: 'questions@freebsd.org' > > > > > > > > > > Subject: Re: KSCD... > > > > > > > > > > > > > > > > > > > > On Tue, Sep 21, 1999 at 02:57:11PM -0400, Luis Rios > wrote: > > > > > > > > > > > I've just recently installed FreeBSD3.2 on a pentium > 166 > > > with > > > > > 64M > > > > > > > of > > > > > > > > ram > > > > > > > > > > > along with KDE. The problem lies when I try to access > the > > > CD > > > > > > > players > > > > > > > > app > > > > > > > > > > > (KSCD) . Everytime I try to run it starts, stops, and > then > > > > > dumps > > > > > > > > core.. > > > > > > > > > > The > > > > > > > > > > > only thing that I can think of is the device for the > > > CD-ROM is > > > > > > > > incorrect > > > > > > > > > > or > > > > > > > > > > > PNP is not enabled (I removed it from the kernel). Has > > > anyone > > > > > had > > > > > > > this > > > > > > > > > > > problem or are things just not configured correctly?? > Any > > > > > advice > > > > > > > or > > > > > > > > > > hints > > > > > > > > > > > would be greatly appreciated.... > > > > > > > > > > > I installed KDE via pkg_add... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > <sigh> > > > > > > > > > > Why can't the KDE "fix" this? kscd uses rmatcd0 as its > > > default > > > > > CD > > > > > > > > > > device. This is the proprietry Matsushita/Panasonic > > > interface. > > > > > It's > > > > > > > > > > from the days of 2x drives. Who uses *those* anymore? > > > > > > > > > > > > > > > > > > > > Anyway, either start it with ``-dev > > > /dev/<your_raw_cd_device>'' > > > > > (I > > > > > > > > > > think that is the correct option, it may just be ``-d > > > > > /dev/.....''. > > > > > > > > > > > > > > > > > > > > Better still, add the following to > > > ~/.kde/share/config/kscdrc > > > > > > > > > > > > > > > > > > > > [General] > > > > > > > > > > CDDevice=/dev/cd0c > > > > > > > > > > ^^^^ > > > > > > > > > > > > > > > > > > > > Change this to suit. ISTR that someone said that it > needs to > > > be > > > > > > > > > > the raw device for IDE CD-ROMs but I'm not sure, mine's > > > SCSI. > > > > > > > > > > > > > > > > > > > > There is a catch-22 with kscd, the kscdrc file is empty > > > until > > > > > you > > > > > > > > > > run kscd the first time, once you get it started you can > add > > > the > > > > > > > > > > above line via the options menu, but you can't start > kscd > > > until > > > > > > > > > > you know how to specify the correct device :-/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Please reply to the sending address as I am not > currently > > > on > > > > > the > > > > > > > > mailing > > > > > > > > > > > list... > > > > > > > > > > > > > > > > > > > > > > Thanks.. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > > > > > > with "unsubscribe freebsd-questions" in the body of > the > > > > > message > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > STATE-OF-THE-ART: Any computer you can't afford. > > > > > > > > > > OBSOLETE: Any computer you own. > > > > > > > > > > > > > ________________________________________________________________ > > > > > > > > > > FreeBSD - The Power To Serve > http://www.freebsd.org > > > > > > > > > > My Webpage http://ukug.uk.freebsd.org/~mark/ > > > > > > > > > > mailto:mark@ukug.uk.freebsd.org > > > > > http://www.radan.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > > > > > with "unsubscribe freebsd-questions" in the body of the > > > message > > > > > > > > > > > > > > > > -- > > > > > > > > STATE-OF-THE-ART: Any computer you can't afford. > > > > > > > > OBSOLETE: Any computer you own. > > > > > > > > > ________________________________________________________________ > > > > > > > > FreeBSD - The Power To Serve http://www.freebsd.org > > > > > > > > My Webpage http://ukug.uk.freebsd.org/~mark/ > > > > > > > > mailto:mark@ukug.uk.freebsd.org > > > http://www.radan.com > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > Rick Knebel > > > > > > > rknebel@uplink.net > > > > > > > http://rknebel.uplink.net > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > > > > > > -- > > > > > Rick Knebel > > > > > rknebel@uplink.net > > > > > http://rknebel.uplink.net > > > > > > > > > > -- > > > Rick Knebel > > > rknebel@uplink.net > > > http://rknebel.uplink.net > > > > -- > Rick Knebel > rknebel@uplink.net > http://rknebel.uplink.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6C37EE640B78D2118D2F00A0C90FCB4401105CA3>